include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_DSPI
  14 #define SPL_NO_PCIE
  15 #define SPL_NO_ENV
  16 #define SPL_NO_MISC
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #define SPL_NO_QE
  20 #define SPL_NO_EEPROM
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/stream_id_lsch2.h>
  30 #include <asm/arch/config.h>
  31
  32 /* Link Definitions */
  33 #ifdef CONFIG_TFABOOT
  34 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  35 #else
  36 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  37 #endif
  38
  39 #define CONFIG_VERY_BIG_RAM
  40 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  41 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  42 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  43 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  44
  45 #define CPU_RELEASE_ADDR               secondary_boot_addr
  46
  47 /* Generic Timer Definitions */
  48 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  49
  50 /* Serial Port */
  51 #define CONFIG_SYS_NS16550_SERIAL
  52 #define CONFIG_SYS_NS16550_REG_SIZE     1
  53 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  54
  55 /* SD boot SPL */
  56 #ifdef CONFIG_SD_BOOT
  57
  58 #define CONFIG_SPL_MAX_SIZE             0x17000
  59 #define CONFIG_SPL_STACK                0x1001e000
  60 #define CONFIG_SPL_PAD_TO               0x1d000
  61
  62 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  63                                         CONFIG_SPL_BSS_MAX_SIZE)
  64 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  65 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  66 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  67
  68 #ifdef CONFIG_NXP_ESBC
  69 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  70 /*
  71  * HDR would be appended at end of image and copied to DDR along
  72  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  73  * size increases then increase this size in case of secure boot as
  74  * it uses raw u-boot image instead of fit image.
  75  */
  76 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  77 #else
  78 #define CONFIG_SYS_MONITOR_LEN          0x100000
  79 #endif /* ifdef CONFIG_NXP_ESBC */
  80 #endif
  81
  82 /* NAND SPL */
  83 #ifdef CONFIG_NAND_BOOT
  84 #define CONFIG_SPL_PBL_PAD
  85 #define CONFIG_SPL_MAX_SIZE             0x1a000
  86 #define CONFIG_SPL_STACK                0x1001d000
  87 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  88 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  89 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
  90 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  91 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  92 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  93
  94 #ifdef CONFIG_NXP_ESBC
  95 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  96 #endif /* ifdef CONFIG_NXP_ESBC */
  97
  98 #ifdef CONFIG_U_BOOT_HDR_SIZE
  99 /*
 100  * HDR would be appended at end of image and copied to DDR along
 101  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 102  * size increases then increase this size in case of secure boot as
 103  * it uses raw u-boot image instead of fit image.
 104  */
 105 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 106 #else
 107 #define CONFIG_SYS_MONITOR_LEN          0x100000
 108 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 109
 110 #endif
 111
 112 /* GPIO */
 113
 114 /* IFC */
 115 #ifndef SPL_NO_IFC
 116 #if defined(CONFIG_TFABOOT) || \
 117         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
 118 /*
 119  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 120  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 121  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 122  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
 123  */
 124 #define CONFIG_SYS_FLASH_BASE                   0x60000000
 125 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 126 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 127
 128 #ifdef CONFIG_MTD_NOR_FLASH
 129 #define CONFIG_SYS_FLASH_QUIET_TEST
 130 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 131 #endif
 132 #endif
 133 #endif
 134
 135 /* I2C */
 136
 137 /* PCIe */
 138 #ifndef SPL_NO_PCIE
 139 #define CONFIG_PCIE1            /* PCIE controller 1 */
 140 #define CONFIG_PCIE2            /* PCIE controller 2 */
 141 #define CONFIG_PCIE3            /* PCIE controller 3 */
 142
 143 #ifdef CONFIG_PCI
 144 #define CONFIG_PCI_SCAN_SHOW
 145 #endif
 146 #endif
 147
 148 /*  DSPI  */
 149
 150 /* FMan ucode */
 151 #ifndef SPL_NO_FMAN
 152 #define CONFIG_SYS_DPAA_FMAN
 153 #ifdef CONFIG_SYS_DPAA_FMAN
 154 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 155
 156 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 157 #endif
 158 #endif
 159
 160 /* Miscellaneous configurable options */
 161
 162 #define CONFIG_HWCONFIG
 163 #define HWCONFIG_BUFFER_SIZE            128
 164
 165 #ifndef SPL_NO_MISC
 166 #ifndef CONFIG_SPL_BUILD
 167 #define BOOT_TARGET_DEVICES(func) \
 168         func(MMC, mmc, 0) \
 169         func(USB, usb, 0) \
 170         func(DHCP, dhcp, na)
 171 #include <config_distro_bootcmd.h>
 172 #endif
 173
 174 /* Initial environment variables */
 175 #define CONFIG_EXTRA_ENV_SETTINGS               \
 176         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 177         "fdt_high=0xffffffffffffffff\0"         \
 178         "initrd_high=0xffffffffffffffff\0"      \
 179         "fdt_addr=0x64f00000\0"                 \
 180         "kernel_addr=0x61000000\0"              \
 181         "scriptaddr=0x80000000\0"               \
 182         "scripthdraddr=0x80080000\0"            \
 183         "fdtheader_addr_r=0x80100000\0"         \
 184         "kernelheader_addr_r=0x80200000\0"      \
 185         "kernel_addr_r=0x81000000\0"            \
 186         "kernel_start=0x1000000\0"              \
 187         "kernelheader_start=0x800000\0"         \
 188         "fdt_addr_r=0x90000000\0"               \
 189         "load_addr=0xa0000000\0"                \
 190         "kernelheader_addr=0x60600000\0"        \
 191         "kernel_size=0x2800000\0"               \
 192         "kernelheader_size=0x40000\0"           \
 193         "kernel_addr_sd=0x8000\0"               \
 194         "kernel_size_sd=0x14000\0"              \
 195         "kernelhdr_addr_sd=0x3000\0"            \
 196         "kernelhdr_size_sd=0x10\0"              \
 197         "console=ttyS0,115200\0"                \
 198         "boot_os=y\0"                           \
 199         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
 200         BOOTENV                                 \
 201         "boot_scripts=ls1043ardb_boot.scr\0"    \
 202         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 203         "scan_dev_for_boot_part="               \
 204                 "part list ${devtype} ${devnum} devplist; "     \
 205                 "env exists devplist || setenv devplist 1; "    \
 206                 "for distro_bootpart in ${devplist}; do "       \
 207                         "if fstype ${devtype} "                 \
 208                                 "${devnum}:${distro_bootpart} " \
 209                                 "bootfstype; then "             \
 210                                 "run scan_dev_for_boot; "       \
 211                         "fi; "                                  \
 212                 "done\0"                        \
 213         "boot_a_script="                                        \
 214                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 215                         "${scriptaddr} ${prefix}${script}; "    \
 216                 "env exists secureboot && load ${devtype} "     \
 217                         "${devnum}:${distro_bootpart} "         \
 218                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 219                         "env exists secureboot "        \
 220                         "&& esbc_validate ${scripthdraddr};"    \
 221                 "source ${scriptaddr}\0"                        \
 222         "qspi_bootcmd=echo Trying load from qspi..;"    \
 223                 "sf probe && sf read $load_addr "       \
 224                 "$kernel_start $kernel_size; env exists secureboot "    \
 225                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 226                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 227                 "bootm $load_addr#$board\0"     \
 228         "nor_bootcmd=echo Trying load from nor..;"      \
 229                 "cp.b $kernel_addr $load_addr " \
 230                 "$kernel_size; env exists secureboot "  \
 231                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 232                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 233                 "bootm $load_addr#$board\0"         \
 234         "nand_bootcmd=echo Trying load from NAND..;"    \
 235                 "nand info; nand read $load_addr "      \
 236                 "$kernel_start $kernel_size; env exists secureboot "    \
 237                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 238                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 239                 "bootm $load_addr#$board\0"     \
 240         "sd_bootcmd=echo Trying load from SD ..;"       \
 241                 "mmcinfo; mmc read $load_addr "         \
 242                 "$kernel_addr_sd $kernel_size_sd && "     \
 243                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 244                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 245                 " && esbc_validate ${kernelheader_addr_r};"     \
 246                 "bootm $load_addr#$board\0"
 247
 248
 249 #ifdef CONFIG_TFABOOT
 250 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 251                            "env exists secureboot && esbc_halt;"
 252 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 253                            "env exists secureboot && esbc_halt;"
 254 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 255                            "env exists secureboot && esbc_halt;"
 256 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 257                            "env exists secureboot && esbc_halt;"
 258 #endif
 259 #endif
 260
 261 /* Monitor Command Prompt */
 262 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 263
 264 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 265
 266 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 267
 268 #include <asm/arch/soc.h>
 269
 270 #endif /* __LS1043A_COMMON_H */