include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1043A_COMMON_H
   7 #define __LS1043A_COMMON_H
   8
   9 /* SPL build */
  10 #ifdef CONFIG_SPL_BUILD
  11 #define SPL_NO_FMAN
  12 #define SPL_NO_DSPI
  13 #define SPL_NO_PCIE
  14 #define SPL_NO_ENV
  15 #define SPL_NO_MISC
  16 #define SPL_NO_USB
  17 #define SPL_NO_SATA
  18 #define SPL_NO_QE
  19 #define SPL_NO_EEPROM
  20 #endif
  21 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  22 #define SPL_NO_MMC
  23 #endif
  24 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  25 #define SPL_NO_IFC
  26 #endif
  27
  28 #define CONFIG_REMAKE_ELF
  29 #define CONFIG_GICV2
  30
  31 #include <asm/arch/stream_id_lsch2.h>
  32 #include <asm/arch/config.h>
  33
  34 /* Link Definitions */
  35 #ifdef CONFIG_TFABOOT
  36 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  37 #else
  38 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  39 #endif
  40
  41 #define CONFIG_SKIP_LOWLEVEL_INIT
  42
  43 #define CONFIG_VERY_BIG_RAM
  44 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  45 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  46 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  47 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  48
  49 #define CPU_RELEASE_ADDR               secondary_boot_func
  50
  51 /* Generic Timer Definitions */
  52 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  53
  54 /* Size of malloc() pool */
  55 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  56
  57 /* Serial Port */
  58 #define CONFIG_SYS_NS16550_SERIAL
  59 #define CONFIG_SYS_NS16550_REG_SIZE     1
  60 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  61
  62 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  63
  64 /* SD boot SPL */
  65 #ifdef CONFIG_SD_BOOT
  66
  67 #define CONFIG_SPL_MAX_SIZE             0x17000
  68 #define CONFIG_SPL_STACK                0x1001e000
  69 #define CONFIG_SPL_PAD_TO               0x1d000
  70
  71 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  72                                         CONFIG_SPL_BSS_MAX_SIZE)
  73 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  74 #define CONFIG_SPL_BSS_START_ADDR       0x8f000000
  75 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  76
  77 #ifdef CONFIG_SECURE_BOOT
  78 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  79 /*
  80  * HDR would be appended at end of image and copied to DDR along
  81  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  82  * size increases then increase this size in case of secure boot as
  83  * it uses raw u-boot image instead of fit image.
  84  */
  85 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  86 #else
  87 #define CONFIG_SYS_MONITOR_LEN          0x100000
  88 #endif /* ifdef CONFIG_SECURE_BOOT */
  89 #endif
  90
  91 /* NAND SPL */
  92 #ifdef CONFIG_NAND_BOOT
  93 #define CONFIG_SPL_PBL_PAD
  94 #define CONFIG_SPL_MAX_SIZE             0x1a000
  95 #define CONFIG_SPL_STACK                0x1001d000
  96 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  97 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  98 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
  99 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 100 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 101 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 102
 103 #ifdef CONFIG_SECURE_BOOT
 104 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 105 #endif /* ifdef CONFIG_SECURE_BOOT */
 106
 107 #ifdef CONFIG_U_BOOT_HDR_SIZE
 108 /*
 109  * HDR would be appended at end of image and copied to DDR along
 110  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 111  * size increases then increase this size in case of secure boot as
 112  * it uses raw u-boot image instead of fit image.
 113  */
 114 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 115 #else
 116 #define CONFIG_SYS_MONITOR_LEN          0x100000
 117 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 118
 119 #endif
 120
 121 /* IFC */
 122 #ifndef SPL_NO_IFC
 123 #if defined(CONFIG_TFABOOT) || \
 124         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
 125 #define CONFIG_FSL_IFC
 126 /*
 127  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 128  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 129  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 130  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
 131  */
 132 #define CONFIG_SYS_FLASH_BASE                   0x60000000
 133 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
 134 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 135
 136 #ifdef CONFIG_MTD_NOR_FLASH
 137 #define CONFIG_SYS_FLASH_QUIET_TEST
 138 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 139 #endif
 140 #endif
 141 #endif
 142
 143 /* I2C */
 144 #define CONFIG_SYS_I2C
 145
 146 /* PCIe */
 147 #ifndef SPL_NO_PCIE
 148 #define CONFIG_PCIE1            /* PCIE controller 1 */
 149 #define CONFIG_PCIE2            /* PCIE controller 2 */
 150 #define CONFIG_PCIE3            /* PCIE controller 3 */
 151
 152 #ifdef CONFIG_PCI
 153 #define CONFIG_PCI_SCAN_SHOW
 154 #endif
 155 #endif
 156
 157 /* Command line configuration */
 158
 159 /*  MMC  */
 160 #ifndef SPL_NO_MMC
 161 #ifdef CONFIG_MMC
 162 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 163 #endif
 164 #endif
 165
 166 /*  DSPI  */
 167 #ifndef SPL_NO_DSPI
 168 #define CONFIG_FSL_DSPI
 169 #ifdef CONFIG_FSL_DSPI
 170 #define CONFIG_DM_SPI_FLASH
 171 #define CONFIG_SPI_FLASH_STMICRO        /* cs0 */
 172 #define CONFIG_SPI_FLASH_SST            /* cs1 */
 173 #define CONFIG_SPI_FLASH_EON            /* cs2 */
 174 #endif
 175 #endif
 176
 177 /* FMan ucode */
 178 #ifndef SPL_NO_FMAN
 179 #define CONFIG_SYS_DPAA_FMAN
 180 #ifdef CONFIG_SYS_DPAA_FMAN
 181 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 182
 183 #ifdef CONFIG_TFABOOT
 184 #define CONFIG_SYS_FMAN_FW_ADDR         0x900000
 185 #define CONFIG_SYS_QE_FW_ADDR           0x940000
 186
 187
 188 #else
 189 #ifdef CONFIG_NAND_BOOT
 190 /* Store Fman ucode at offeset 0x900000(72 blocks). */
 191 #define CONFIG_SYS_FMAN_FW_ADDR         (72 * CONFIG_SYS_NAND_BLOCK_SIZE)
 192 #elif defined(CONFIG_SD_BOOT)
 193 /*
 194  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 195  * about 1MB (2040 blocks), Env is stored after the image, and the env size is
 196  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
 197  */
 198 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x4800)
 199 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x4A00)
 200 #elif defined(CONFIG_QSPI_BOOT)
 201 #define CONFIG_SYS_FMAN_FW_ADDR         0x40900000
 202 #else
 203 /* FMan fireware Pre-load address */
 204 #define CONFIG_SYS_FMAN_FW_ADDR         0x60900000
 205 #define CONFIG_SYS_QE_FW_ADDR           0x60940000
 206 #endif
 207 #endif
 208 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 209 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 210 #endif
 211 #endif
 212
 213 /* Miscellaneous configurable options */
 214 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 215
 216 #define CONFIG_HWCONFIG
 217 #define HWCONFIG_BUFFER_SIZE            128
 218
 219 #ifndef SPL_NO_MISC
 220 #ifndef CONFIG_SPL_BUILD
 221 #define BOOT_TARGET_DEVICES(func) \
 222         func(MMC, mmc, 0) \
 223         func(USB, usb, 0) \
 224         func(DHCP, dhcp, na)
 225 #include <config_distro_bootcmd.h>
 226 #endif
 227
 228 /* Initial environment variables */
 229 #define CONFIG_EXTRA_ENV_SETTINGS               \
 230         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 231         "fdt_high=0xffffffffffffffff\0"         \
 232         "initrd_high=0xffffffffffffffff\0"      \
 233         "fdt_addr=0x64f00000\0"                 \
 234         "kernel_addr=0x61000000\0"              \
 235         "scriptaddr=0x80000000\0"               \
 236         "scripthdraddr=0x80080000\0"            \
 237         "fdtheader_addr_r=0x80100000\0"         \
 238         "kernelheader_addr_r=0x80200000\0"      \
 239         "kernel_addr_r=0x81000000\0"            \
 240         "kernel_start=0x1000000\0"              \
 241         "kernelheader_start=0x800000\0"         \
 242         "fdt_addr_r=0x90000000\0"               \
 243         "load_addr=0xa0000000\0"                \
 244         "kernelheader_addr=0x60800000\0"        \
 245         "kernel_size=0x2800000\0"               \
 246         "kernelheader_size=0x40000\0"           \
 247         "kernel_addr_sd=0x8000\0"               \
 248         "kernel_size_sd=0x14000\0"              \
 249         "kernelhdr_addr_sd=0x4000\0"            \
 250         "kernelhdr_size_sd=0x10\0"              \
 251         "console=ttyS0,115200\0"                \
 252         "boot_os=y\0"                           \
 253         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
 254         BOOTENV                                 \
 255         "boot_scripts=ls1043ardb_boot.scr\0"    \
 256         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 257         "scan_dev_for_boot_part="               \
 258                 "part list ${devtype} ${devnum} devplist; "     \
 259                 "env exists devplist || setenv devplist 1; "    \
 260                 "for distro_bootpart in ${devplist}; do "       \
 261                         "if fstype ${devtype} "                 \
 262                                 "${devnum}:${distro_bootpart} " \
 263                                 "bootfstype; then "             \
 264                                 "run scan_dev_for_boot; "       \
 265                         "fi; "                                  \
 266                 "done\0"                        \
 267         "boot_a_script="                                        \
 268                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 269                         "${scriptaddr} ${prefix}${script}; "    \
 270                 "env exists secureboot && load ${devtype} "     \
 271                         "${devnum}:${distro_bootpart} "         \
 272                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 273                         "env exists secureboot "        \
 274                         "&& esbc_validate ${scripthdraddr};"    \
 275                 "source ${scriptaddr}\0"                        \
 276         "qspi_bootcmd=echo Trying load from qspi..;"    \
 277                 "sf probe && sf read $load_addr "       \
 278                 "$kernel_addr $kernel_size; env exists secureboot "     \
 279                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 280                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 281                 "bootm $load_addr#$board\0"     \
 282         "nor_bootcmd=echo Trying load from nor..;"      \
 283                 "cp.b $kernel_addr $load_addr " \
 284                 "$kernel_size; env exists secureboot "  \
 285                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 286                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 287                 "bootm $load_addr#$board\0"         \
 288         "nand_bootcmd=echo Trying load from NAND..;"    \
 289                 "nand info; nand read $load_addr "      \
 290                 "$kernel_start $kernel_size; env exists secureboot "    \
 291                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 292                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 293                 "bootm $load_addr#$board\0"     \
 294         "sd_bootcmd=echo Trying load from SD ..;"       \
 295                 "mmcinfo; mmc read $load_addr "         \
 296                 "$kernel_addr_sd $kernel_size_sd && "     \
 297                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 298                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 299                 " && esbc_validate ${kernelheader_addr_r};"     \
 300                 "bootm $load_addr#$board\0"
 301
 302
 303 #undef CONFIG_BOOTCOMMAND
 304 #ifdef CONFIG_TFABOOT
 305 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 306                            "env exists secureboot && esbc_halt;"
 307 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 308                            "env exists secureboot && esbc_halt;"
 309 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 310                            "env exists secureboot && esbc_halt;"
 311 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 312                            "env exists secureboot && esbc_halt;"
 313 #else
 314 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 315 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 316                            "env exists secureboot && esbc_halt;"
 317 #elif defined(CONFIG_SD_BOOT)
 318 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 319                            "env exists secureboot && esbc_halt;"
 320 #else
 321 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "      \
 322                            "env exists secureboot && esbc_halt;"
 323 #endif
 324 #endif
 325 #endif
 326
 327 /* Monitor Command Prompt */
 328 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 329
 330 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 331
 332 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 333
 334 #include <asm/arch/soc.h>
 335
 336 #endif /* __LS1043A_COMMON_H */