include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_DSPI
  14 #define SPL_NO_PCIE
  15 #define SPL_NO_ENV
  16 #define SPL_NO_MISC
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #define SPL_NO_QE
  20 #define SPL_NO_EEPROM
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/stream_id_lsch2.h>
  30 #include <asm/arch/config.h>
  31
  32 /* Link Definitions */
  33
  34 #define CFG_SYS_DDR_SDRAM_BASE  0x80000000
  35 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  36 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  37 #define CFG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  38
  39 #define CPU_RELEASE_ADDR               secondary_boot_addr
  40
  41 /* Serial Port */
  42 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
  43
  44 /* NAND SPL */
  45 #ifdef CONFIG_NAND_BOOT
  46 #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
  47 #define CFG_SYS_NAND_U_BOOT_START       CONFIG_TEXT_BASE
  48 #endif
  49
  50 /* GPIO */
  51
  52 /* IFC */
  53 #ifndef SPL_NO_IFC
  54 #if defined(CONFIG_TFABOOT) || \
  55         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
  56 /*
  57  * CFG_SYS_FLASH_BASE has the final address (core view)
  58  * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  59  * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
  60  * CONFIG_TEXT_BASE is linked to 0x60000000 for booting
  61  */
  62 #define CFG_SYS_FLASH_BASE                      0x60000000
  63 #define CFG_SYS_FLASH_BASE_PHYS         CFG_SYS_FLASH_BASE
  64 #define CFG_SYS_FLASH_BASE_PHYS_EARLY   0x00000000
  65 #endif
  66 #endif
  67
  68 /* I2C */
  69
  70 /*  DSPI  */
  71
  72 /* FMan ucode */
  73 #ifndef SPL_NO_FMAN
  74 #ifdef CONFIG_SYS_DPAA_FMAN
  75 #define CFG_SYS_FM_MURAM_SIZE   0x60000
  76 #endif
  77 #endif
  78
  79 /* Miscellaneous configurable options */
  80
  81 #define HWCONFIG_BUFFER_SIZE            128
  82
  83 #ifndef SPL_NO_MISC
  84 #define BOOT_TARGET_DEVICES(func) \
  85         func(MMC, mmc, 0) \
  86         func(USB, usb, 0) \
  87         func(DHCP, dhcp, na)
  88 #include <config_distro_bootcmd.h>
  89
  90 /* Initial environment variables */
  91 #define CFG_EXTRA_ENV_SETTINGS          \
  92         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
  93         "fdt_high=0xffffffffffffffff\0"         \
  94         "initrd_high=0xffffffffffffffff\0"      \
  95         "kernel_addr=0x61000000\0"              \
  96         "scriptaddr=0x80000000\0"               \
  97         "scripthdraddr=0x80080000\0"            \
  98         "fdtheader_addr_r=0x80100000\0"         \
  99         "kernelheader_addr_r=0x80200000\0"      \
 100         "kernel_addr_r=0x81000000\0"            \
 101         "kernel_start=0x1000000\0"              \
 102         "kernelheader_start=0x800000\0"         \
 103         "fdt_addr_r=0x90000000\0"               \
 104         "load_addr=0xa0000000\0"                \
 105         "kernelheader_addr=0x60600000\0"        \
 106         "kernel_size=0x2800000\0"               \
 107         "kernelheader_size=0x40000\0"           \
 108         "kernel_addr_sd=0x8000\0"               \
 109         "kernel_size_sd=0x14000\0"              \
 110         "kernelhdr_addr_sd=0x3000\0"            \
 111         "kernelhdr_size_sd=0x10\0"              \
 112         "console=ttyS0,115200\0"                \
 113         "boot_os=y\0"                           \
 114         BOOTENV                                 \
 115         "boot_scripts=ls1043ardb_boot.scr\0"    \
 116         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 117         "scan_dev_for_boot_part="               \
 118                 "part list ${devtype} ${devnum} devplist; "     \
 119                 "env exists devplist || setenv devplist 1; "    \
 120                 "for distro_bootpart in ${devplist}; do "       \
 121                         "if fstype ${devtype} "                 \
 122                                 "${devnum}:${distro_bootpart} " \
 123                                 "bootfstype; then "             \
 124                                 "run scan_dev_for_boot; "       \
 125                         "fi; "                                  \
 126                 "done\0"                        \
 127         "boot_a_script="                                        \
 128                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 129                         "${scriptaddr} ${prefix}${script}; "    \
 130                 "env exists secureboot && load ${devtype} "     \
 131                         "${devnum}:${distro_bootpart} "         \
 132                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 133                         "env exists secureboot "        \
 134                         "&& esbc_validate ${scripthdraddr};"    \
 135                 "source ${scriptaddr}\0"                        \
 136         "qspi_bootcmd=echo Trying load from qspi..;"    \
 137                 "sf probe && sf read $load_addr "       \
 138                 "$kernel_start $kernel_size; env exists secureboot "    \
 139                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 140                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 141                 "bootm $load_addr#$board\0"     \
 142         "nor_bootcmd=echo Trying load from nor..;"      \
 143                 "cp.b $kernel_addr $load_addr " \
 144                 "$kernel_size; env exists secureboot "  \
 145                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 146                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 147                 "bootm $load_addr#$board\0"         \
 148         "nand_bootcmd=echo Trying load from NAND..;"    \
 149                 "nand info; nand read $load_addr "      \
 150                 "$kernel_start $kernel_size; env exists secureboot "    \
 151                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 152                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 153                 "bootm $load_addr#$board\0"     \
 154         "sd_bootcmd=echo Trying load from SD ..;"       \
 155                 "mmcinfo; mmc read $load_addr "         \
 156                 "$kernel_addr_sd $kernel_size_sd && "     \
 157                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 158                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 159                 " && esbc_validate ${kernelheader_addr_r};"     \
 160                 "bootm $load_addr#$board\0"
 161
 162
 163 #ifdef CONFIG_TFABOOT
 164 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 165                            "env exists secureboot && esbc_halt;"
 166 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 167                            "env exists secureboot && esbc_halt;"
 168 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 169                            "env exists secureboot && esbc_halt;"
 170 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 171                            "env exists secureboot && esbc_halt;"
 172 #endif
 173 #endif
 174
 175 #include <asm/arch/soc.h>
 176
 177 #endif /* __LS1043A_COMMON_H */