include/configs/ls1043a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor
   4  * Copyright 2019-2021 NXP
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 /* SPL build */
  11 #ifdef CONFIG_SPL_BUILD
  12 #define SPL_NO_FMAN
  13 #define SPL_NO_DSPI
  14 #define SPL_NO_PCIE
  15 #define SPL_NO_ENV
  16 #define SPL_NO_MISC
  17 #define SPL_NO_USB
  18 #define SPL_NO_SATA
  19 #define SPL_NO_QE
  20 #define SPL_NO_EEPROM
  21 #endif
  22 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
  23 #define SPL_NO_MMC
  24 #endif
  25 #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
  26 #define SPL_NO_IFC
  27 #endif
  28
  29 #include <asm/arch/stream_id_lsch2.h>
  30 #include <asm/arch/config.h>
  31
  32 /* Link Definitions */
  33
  34 #define CONFIG_VERY_BIG_RAM
  35 #define CFG_SYS_DDR_SDRAM_BASE  0x80000000
  36 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY  0
  37 #define CFG_SYS_SDRAM_BASE              CFG_SYS_DDR_SDRAM_BASE
  38 #define CFG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  39
  40 #define CPU_RELEASE_ADDR               secondary_boot_addr
  41
  42 /* Serial Port */
  43 #define CFG_SYS_NS16550_CLK          (get_serial_clock())
  44
  45 /* SD boot SPL */
  46 #ifdef CONFIG_SD_BOOT
  47 #ifdef CONFIG_NXP_ESBC
  48 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  49 /*
  50  * HDR would be appended at end of image and copied to DDR along
  51  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  52  * size increases then increase this size in case of secure boot as
  53  * it uses raw u-boot image instead of fit image.
  54  */
  55 #endif /* ifdef CONFIG_NXP_ESBC */
  56 #endif
  57
  58 /* NAND SPL */
  59 #ifdef CONFIG_NAND_BOOT
  60 #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
  61 #define CFG_SYS_NAND_U_BOOT_START       CONFIG_TEXT_BASE
  62
  63 #ifdef CONFIG_NXP_ESBC
  64 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  65 #endif /* ifdef CONFIG_NXP_ESBC */
  66
  67 #ifdef CONFIG_U_BOOT_HDR_SIZE
  68 /*
  69  * HDR would be appended at end of image and copied to DDR along
  70  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  71  * size increases then increase this size in case of secure boot as
  72  * it uses raw u-boot image instead of fit image.
  73  */
  74 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  75
  76 #endif
  77
  78 /* GPIO */
  79
  80 /* IFC */
  81 #ifndef SPL_NO_IFC
  82 #if defined(CONFIG_TFABOOT) || \
  83         (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
  84 /*
  85  * CFG_SYS_FLASH_BASE has the final address (core view)
  86  * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  87  * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
  88  * CONFIG_TEXT_BASE is linked to 0x60000000 for booting
  89  */
  90 #define CFG_SYS_FLASH_BASE                      0x60000000
  91 #define CFG_SYS_FLASH_BASE_PHYS         CFG_SYS_FLASH_BASE
  92 #define CFG_SYS_FLASH_BASE_PHYS_EARLY   0x00000000
  93
  94 #ifdef CONFIG_MTD_NOR_FLASH
  95 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
  96 #endif
  97 #endif
  98 #endif
  99
 100 /* I2C */
 101
 102 /*  DSPI  */
 103
 104 /* FMan ucode */
 105 #ifndef SPL_NO_FMAN
 106 #ifdef CONFIG_SYS_DPAA_FMAN
 107 #define CFG_SYS_FM_MURAM_SIZE   0x60000
 108 #endif
 109 #endif
 110
 111 /* Miscellaneous configurable options */
 112
 113 #define HWCONFIG_BUFFER_SIZE            128
 114
 115 #ifndef SPL_NO_MISC
 116 #define BOOT_TARGET_DEVICES(func) \
 117         func(MMC, mmc, 0) \
 118         func(USB, usb, 0) \
 119         func(DHCP, dhcp, na)
 120 #include <config_distro_bootcmd.h>
 121
 122 /* Initial environment variables */
 123 #define CONFIG_EXTRA_ENV_SETTINGS               \
 124         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 125         "fdt_high=0xffffffffffffffff\0"         \
 126         "initrd_high=0xffffffffffffffff\0"      \
 127         "kernel_addr=0x61000000\0"              \
 128         "scriptaddr=0x80000000\0"               \
 129         "scripthdraddr=0x80080000\0"            \
 130         "fdtheader_addr_r=0x80100000\0"         \
 131         "kernelheader_addr_r=0x80200000\0"      \
 132         "kernel_addr_r=0x81000000\0"            \
 133         "kernel_start=0x1000000\0"              \
 134         "kernelheader_start=0x800000\0"         \
 135         "fdt_addr_r=0x90000000\0"               \
 136         "load_addr=0xa0000000\0"                \
 137         "kernelheader_addr=0x60600000\0"        \
 138         "kernel_size=0x2800000\0"               \
 139         "kernelheader_size=0x40000\0"           \
 140         "kernel_addr_sd=0x8000\0"               \
 141         "kernel_size_sd=0x14000\0"              \
 142         "kernelhdr_addr_sd=0x3000\0"            \
 143         "kernelhdr_size_sd=0x10\0"              \
 144         "console=ttyS0,115200\0"                \
 145         "boot_os=y\0"                           \
 146         BOOTENV                                 \
 147         "boot_scripts=ls1043ardb_boot.scr\0"    \
 148         "boot_script_hdr=hdr_ls1043ardb_bs.out\0"       \
 149         "scan_dev_for_boot_part="               \
 150                 "part list ${devtype} ${devnum} devplist; "     \
 151                 "env exists devplist || setenv devplist 1; "    \
 152                 "for distro_bootpart in ${devplist}; do "       \
 153                         "if fstype ${devtype} "                 \
 154                                 "${devnum}:${distro_bootpart} " \
 155                                 "bootfstype; then "             \
 156                                 "run scan_dev_for_boot; "       \
 157                         "fi; "                                  \
 158                 "done\0"                        \
 159         "boot_a_script="                                        \
 160                 "load ${devtype} ${devnum}:${distro_bootpart} " \
 161                         "${scriptaddr} ${prefix}${script}; "    \
 162                 "env exists secureboot && load ${devtype} "     \
 163                         "${devnum}:${distro_bootpart} "         \
 164                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 165                         "env exists secureboot "        \
 166                         "&& esbc_validate ${scripthdraddr};"    \
 167                 "source ${scriptaddr}\0"                        \
 168         "qspi_bootcmd=echo Trying load from qspi..;"    \
 169                 "sf probe && sf read $load_addr "       \
 170                 "$kernel_start $kernel_size; env exists secureboot "    \
 171                 "&& sf read $kernelheader_addr_r $kernelheader_start "  \
 172                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 173                 "bootm $load_addr#$board\0"     \
 174         "nor_bootcmd=echo Trying load from nor..;"      \
 175                 "cp.b $kernel_addr $load_addr " \
 176                 "$kernel_size; env exists secureboot "  \
 177                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 178                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 179                 "bootm $load_addr#$board\0"         \
 180         "nand_bootcmd=echo Trying load from NAND..;"    \
 181                 "nand info; nand read $load_addr "      \
 182                 "$kernel_start $kernel_size; env exists secureboot "    \
 183                 "&& nand read $kernelheader_addr_r $kernelheader_start "        \
 184                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 185                 "bootm $load_addr#$board\0"     \
 186         "sd_bootcmd=echo Trying load from SD ..;"       \
 187                 "mmcinfo; mmc read $load_addr "         \
 188                 "$kernel_addr_sd $kernel_size_sd && "     \
 189                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 190                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 191                 " && esbc_validate ${kernelheader_addr_r};"     \
 192                 "bootm $load_addr#$board\0"
 193
 194
 195 #ifdef CONFIG_TFABOOT
 196 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "   \
 197                            "env exists secureboot && esbc_halt;"
 198 #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "  \
 199                            "env exists secureboot && esbc_halt;"
 200 #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "     \
 201                            "env exists secureboot && esbc_halt;"
 202 #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; "   \
 203                            "env exists secureboot && esbc_halt;"
 204 #endif
 205 #endif
 206
 207 #include <asm/arch/soc.h>
 208
 209 #endif /* __LS1043A_COMMON_H */