include/configs/ls1028a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2019 NXP
   4  */
   5
   6 #ifndef __L1028A_COMMON_H
   7 #define __L1028A_COMMON_H
   8
   9 #define CONFIG_REMAKE_ELF
  10 #define CONFIG_FSL_LAYERSCAPE
  11 #define CONFIG_MP
  12
  13 #include <asm/arch/stream_id_lsch3.h>
  14 #include <asm/arch/config.h>
  15 #include <asm/arch/soc.h>
  16
  17 /* Link Definitions */
  18 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  19
  20 #define CONFIG_SKIP_LOWLEVEL_INIT
  21
  22 #define CONFIG_VERY_BIG_RAM
  23 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  24 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  25 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  26 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x2080000000ULL
  27 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS       1
  28
  29 #define CONFIG_CMD_MEMTEST
  30 #define CONFIG_SYS_MEMTEST_START        0x80000000
  31 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  32
  33 /*
  34  * SMP Definitinos
  35  */
  36 #define CPU_RELEASE_ADDR                secondary_boot_func
  37
  38 /* Generic Timer Definitions */
  39 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  40
  41 /* Size of malloc() pool */
  42 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2048 * 1024)
  43
  44 /* I2C */
  45 #define CONFIG_SYS_I2C
  46
  47 /* Serial Port */
  48 #define CONFIG_CONS_INDEX       1
  49 #define CONFIG_SYS_NS16550_SERIAL
  50 #define CONFIG_SYS_NS16550_REG_SIZE     1
  51 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
  52
  53 #define CONFIG_BAUDRATE                 115200
  54 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  55
  56 /* Miscellaneous configurable options */
  57 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  58
  59 /* Physical Memory Map */
  60 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  61
  62 #define CONFIG_HWCONFIG
  63 #define HWCONFIG_BUFFER_SIZE            128
  64
  65 /* Allow to overwrite serial and ethaddr */
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 #define BOOT_TARGET_DEVICES(func) \
  69         func(MMC, mmc, 0) \
  70         func(USB, usb, 0)
  71 #include <config_distro_bootcmd.h>
  72
  73 /* Initial environment variables */
  74 #define CONFIG_EXTRA_ENV_SETTINGS               \
  75         "board=ls1028ardb\0"                    \
  76         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
  77         "ramdisk_addr=0x800000\0"               \
  78         "ramdisk_size=0x2000000\0"              \
  79         "fdt_high=0xffffffffffffffff\0"         \
  80         "initrd_high=0xffffffffffffffff\0"      \
  81         "fdt_addr=0x00f00000\0"                 \
  82         "kernel_addr=0x01000000\0"              \
  83         "scriptaddr=0x80000000\0"               \
  84         "scripthdraddr=0x80080000\0"            \
  85         "fdtheader_addr_r=0x80100000\0"         \
  86         "kernelheader_addr_r=0x80200000\0"      \
  87         "load_addr=0xa0000000\0"            \
  88         "kernel_addr_r=0x81000000\0"            \
  89         "fdt_addr_r=0x90000000\0"               \
  90         "ramdisk_addr_r=0xa0000000\0"           \
  91         "kernel_start=0x1000000\0"              \
  92         "kernelheader_start=0x800000\0"         \
  93         "kernel_load=0xa0000000\0"              \
  94         "kernel_size=0x2800000\0"               \
  95         "kernelheader_size=0x40000\0"           \
  96         "kernel_addr_sd=0x8000\0"               \
  97         "kernel_size_sd=0x14000\0"              \
  98         "kernelhdr_addr_sd=0x4000\0"            \
  99         "kernelhdr_size_sd=0x10\0"              \
 100         "console=ttyS0,115200\0"                \
 101         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"        \
 102         BOOTENV                                 \
 103         "boot_scripts=ls1028ardb_boot.scr\0"    \
 104         "boot_script_hdr=hdr_ls1028ardb_bs.out\0"       \
 105         "scan_dev_for_boot_part="               \
 106                 "part list ${devtype} ${devnum} devplist; "   \
 107                 "env exists devplist || setenv devplist 1; "  \
 108                 "for distro_bootpart in ${devplist}; do "     \
 109                   "if fstype ${devtype} "                  \
 110                         "${devnum}:${distro_bootpart} "      \
 111                         "bootfstype; then "                  \
 112                         "run scan_dev_for_boot; "            \
 113                   "fi; "                                   \
 114                 "done\0"                                   \
 115         "scan_dev_for_boot="                              \
 116                 "echo Scanning ${devtype} "               \
 117                                 "${devnum}:${distro_bootpart}...; "  \
 118                 "for prefix in ${boot_prefixes}; do "     \
 119                         "run scan_dev_for_scripts; "      \
 120                 "done;"                                   \
 121                 "\0"                                      \
 122         "boot_a_script="                                  \
 123                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 124                         "${scriptaddr} ${prefix}${script}; "    \
 125                 "env exists secureboot && load ${devtype} "     \
 126                         "${devnum}:${distro_bootpart} "         \
 127                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 128                         "&& esbc_validate ${scripthdraddr};"    \
 129                 "source ${scriptaddr}\0"          \
 130         "sd_bootcmd=echo Trying load from SD ..;"       \
 131                 "mmcinfo; mmc read $load_addr "         \
 132                 "$kernel_addr_sd $kernel_size_sd && "   \
 133                 "env exists secureboot && mmc read $kernelheader_addr_r " \
 134                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 135                 " && esbc_validate ${kernelheader_addr_r};"     \
 136                 "bootm $load_addr#$board\0"             \
 137         "emmc_bootcmd=echo Trying load from EMMC ..;"   \
 138                 "mmcinfo; mmc dev 1; mmc read $load_addr "              \
 139                 "$kernel_addr_sd $kernel_size_sd && "   \
 140                 "env exists secureboot && mmc read $kernelheader_addr_r " \
 141                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 142                 " && esbc_validate ${kernelheader_addr_r};"     \
 143                 "bootm $load_addr#$board\0"
 144
 145 #undef CONFIG_BOOTCOMMAND
 146
 147 #define SD_BOOTCOMMAND  \
 148         "run distro_bootcmd;run sd_bootcmd; " \
 149         "env exists secureboot && esbc_halt;"
 150
 151 /* Monitor Command Prompt */
 152 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 153 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 154                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 155 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 156
 157 #ifndef CONFIG_CMDLINE_EDITING
 158 #define CONFIG_CMDLINE_EDITING          1
 159 #endif
 160
 161 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 162
 163 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 164
 165 /*  MMC  */
 166 #ifdef CONFIG_MMC
 167 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 168 #endif
 169
 170 #define CONFIG_SYS_MMC_ENV_DEV         0
 171 #define OCRAM_NONSECURE_SIZE            0x00010000
 172 #define CONFIG_ENV_OFFSET              0x500000        /* 5MB */
 173 #define CONFIG_SYS_FSL_QSPI_BASE        0x20000000
 174 #define CONFIG_ENV_ADDR CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET
 175 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 176 #define CONFIG_ENV_SECT_SIZE           0x40000
 177
 178 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 179
 180 /* I2C bus multiplexer */
 181 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 182 #define I2C_MUX_CH_DEFAULT              0x8
 183
 184 /* EEPROM */
 185 #define CONFIG_ID_EEPROM
 186 #define CONFIG_SYS_I2C_EEPROM_NXID
 187 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 188 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 189 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 190 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 191 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 192
 193 #ifdef CONFIG_SECURE_BOOT
 194 #include <asm/fsl_secure_boot.h>
 195 #endif
 196
 197 /* Ethernet */
 198 /* smallest ENETC BD ring has 8 entries */
 199 #define CONFIG_SYS_RX_ETH_BUFFER                8
 200
 201 #endif /* __L1028A_COMMON_H */