include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_SYS_FSL_CLK
  13
  14 #define CONFIG_SKIP_LOWLEVEL_INIT
  15 #define CONFIG_DEEP_SLEEP
  16
  17 /*
  18  * Size of malloc() pool
  19  */
  20 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  21
  22 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  23 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  24
  25 #define CONFIG_SYS_CLK_FREQ             100000000
  26
  27 #define DDR_SDRAM_CFG                   0x470c0008
  28 #define DDR_CS0_BNDS                    0x008000bf
  29 #define DDR_CS0_CONFIG                  0x80014302
  30 #define DDR_TIMING_CFG_0                0x50550004
  31 #define DDR_TIMING_CFG_1                0xbcb38c56
  32 #define DDR_TIMING_CFG_2                0x0040d120
  33 #define DDR_TIMING_CFG_3                0x010e1000
  34 #define DDR_TIMING_CFG_4                0x00000001
  35 #define DDR_TIMING_CFG_5                0x03401400
  36 #define DDR_SDRAM_CFG_2                 0x00401010
  37 #define DDR_SDRAM_MODE                  0x00061c60
  38 #define DDR_SDRAM_MODE_2                0x00180000
  39 #define DDR_SDRAM_INTERVAL              0x18600618
  40 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  41 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  42 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  43 #define DDR_DDR_CDR1                    0x80040000
  44 #define DDR_DDR_CDR2                    0x00000001
  45 #define DDR_SDRAM_CLK_CNTL              0x02000000
  46 #define DDR_DDR_ZQ_CNTL                 0x89080600
  47 #define DDR_CS0_CONFIG_2                0
  48 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  49 #define SDRAM_CFG2_D_INIT               0x00000010
  50 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  51 #define SDRAM_CFG2_FRC_SR               0x80000000
  52 #define SDRAM_CFG_BI                    0x00000001
  53
  54 #ifdef CONFIG_SD_BOOT
  55 #ifdef CONFIG_NXP_ESBC
  56 /*
  57  * HDR would be appended at end of image and copied to DDR along
  58  * with U-Boot image.
  59  */
  60 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  61 #endif /* ifdef CONFIG_NXP_ESBC */
  62
  63 #define CONFIG_SPL_MAX_SIZE             0x1a000
  64 #define CONFIG_SPL_STACK                0x1001d000
  65 #define CONFIG_SPL_PAD_TO               0x1c000
  66
  67 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  68                 CONFIG_SYS_MONITOR_LEN)
  69 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  70 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  71 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  72
  73 #ifdef CONFIG_U_BOOT_HDR_SIZE
  74 /*
  75  * HDR would be appended at end of image and copied to DDR along
  76  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  77  * size increases then increase this size in case of secure boot as
  78  * it uses raw u-boot image instead of fit image.
  79  */
  80 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  81 #else
  82 #define CONFIG_SYS_MONITOR_LEN          0x100000
  83 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  84 #endif
  85
  86 #define PHYS_SDRAM                      0x80000000
  87 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  88
  89 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
  90 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
  91
  92 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  93
  94 /*
  95  * IFC Definitions
  96  */
  97 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  98 #define CONFIG_FSL_IFC
  99 #define CONFIG_SYS_FLASH_BASE           0x60000000
 100 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 101
 102 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 103 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 104                                 CSPR_PORT_SIZE_16 | \
 105                                 CSPR_MSEL_NOR | \
 106                                 CSPR_V)
 107 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 108
 109 /* NOR Flash Timing Params */
 110 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 111                                         CSOR_NOR_TRHZ_80)
 112 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 113                                         FTIM0_NOR_TEADC(0x5) | \
 114                                         FTIM0_NOR_TAVDS(0x0) | \
 115                                         FTIM0_NOR_TEAHC(0x5))
 116 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 117                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 118                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 119 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 120                                         FTIM2_NOR_TCH(0x4) | \
 121                                         FTIM2_NOR_TWP(0x1c) | \
 122                                         FTIM2_NOR_TWPH(0x0e))
 123 #define CONFIG_SYS_NOR_FTIM3            0
 124
 125 #define CONFIG_SYS_FLASH_QUIET_TEST
 126 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 127
 128 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 129 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 130 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 131 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 132
 133 #define CONFIG_SYS_FLASH_EMPTY_INFO
 134 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 135
 136 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 137 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 138 #endif
 139
 140 /* CPLD */
 141
 142 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 143 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 144
 145 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 146 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 147                                         CSPR_PORT_SIZE_8 | \
 148                                         CSPR_MSEL_GPCM | \
 149                                         CSPR_V)
 150 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 151 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 152                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 153                                         CSOR_NOR_TRHZ_80)
 154
 155 /* CPLD Timing parameters for IFC GPCM */
 156 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 157                                         FTIM0_GPCM_TEADC(0xf) | \
 158                                         FTIM0_GPCM_TEAHC(0xf))
 159 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 160                                         FTIM1_GPCM_TRAD(0x3f))
 161 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 162                                         FTIM2_GPCM_TCH(0xf) | \
 163                                         FTIM2_GPCM_TWP(0xff))
 164 #define CONFIG_SYS_FPGA_FTIM3           0x0
 165 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 166 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 167 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 168 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 169 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 170 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 171 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 172 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 173 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 174 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 175 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 176 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 177 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 178 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 179 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 180 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 181
 182 /*
 183  * Serial Port
 184  */
 185 #ifdef CONFIG_LPUART
 186 #define CONFIG_LPUART_32B_REG
 187 #else
 188 #define CONFIG_SYS_NS16550_SERIAL
 189 #ifndef CONFIG_DM_SERIAL
 190 #define CONFIG_SYS_NS16550_REG_SIZE     1
 191 #endif
 192 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 193 #endif
 194
 195 /*
 196  * I2C
 197  */
 198
 199 /* GPIO */
 200 #ifdef CONFIG_DM_GPIO
 201 #ifndef CONFIG_MPC8XXX_GPIO
 202 #define CONFIG_MPC8XXX_GPIO
 203 #endif
 204 #endif
 205
 206 /* EEPROM */
 207 #define CONFIG_SYS_I2C_EEPROM_NXID
 208 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 209
 210 /*
 211  * MMC
 212  */
 213
 214 /*
 215  * Video
 216  */
 217 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 218 #define CONFIG_VIDEO_LOGO
 219 #define CONFIG_VIDEO_BMP_LOGO
 220
 221 #define CONFIG_FSL_DCU_SII9022A
 222 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 223 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 224 #endif
 225
 226 /*
 227  * eTSEC
 228  */
 229
 230 #ifdef CONFIG_TSEC_ENET
 231 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 232 #endif
 233
 234 /* PCIe */
 235 #define CONFIG_PCIE1            /* PCIE controller 1 */
 236 #define CONFIG_PCIE2            /* PCIE controller 2 */
 237
 238 #ifdef CONFIG_PCI
 239 #define CONFIG_PCI_SCAN_SHOW
 240 #endif
 241
 242 #define CONFIG_CMDLINE_TAG
 243
 244 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 245 #define CONFIG_LAYERSCAPE_NS_ACCESS
 246 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 247 #define COUNTER_FREQUENCY               12500000
 248
 249 #define CONFIG_HWCONFIG
 250 #define HWCONFIG_BUFFER_SIZE            256
 251
 252 #define CONFIG_FSL_DEVICE_DISABLE
 253
 254 #define BOOT_TARGET_DEVICES(func) \
 255         func(MMC, mmc, 0) \
 256         func(USB, usb, 0) \
 257         func(DHCP, dhcp, na)
 258 #include <config_distro_bootcmd.h>
 259
 260 #ifdef CONFIG_LPUART
 261 #define CONFIG_EXTRA_ENV_SETTINGS       \
 262         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 263                 "cma=64M@0x0-0xb0000000\0" \
 264         "initrd_high=0xffffffff\0"      \
 265         "fdt_addr=0x64f00000\0"         \
 266         "kernel_addr=0x65000000\0"      \
 267         "scriptaddr=0x80000000\0"       \
 268         "scripthdraddr=0x80080000\0"    \
 269         "fdtheader_addr_r=0x80100000\0" \
 270         "kernelheader_addr_r=0x80200000\0"      \
 271         "kernel_addr_r=0x81000000\0"    \
 272         "fdt_addr_r=0x90000000\0"       \
 273         "ramdisk_addr_r=0xa0000000\0"   \
 274         "load_addr=0xa0000000\0"        \
 275         "kernel_size=0x2800000\0"       \
 276         "kernel_addr_sd=0x8000\0"       \
 277         "kernel_size_sd=0x14000\0"      \
 278         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 279         BOOTENV                         \
 280         "boot_scripts=ls1021atwr_boot.scr\0"    \
 281         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 282                 "scan_dev_for_boot_part="       \
 283                         "part list ${devtype} ${devnum} devplist; "     \
 284                         "env exists devplist || setenv devplist 1; "    \
 285                         "for distro_bootpart in ${devplist}; do "       \
 286                         "if fstype ${devtype} "                         \
 287                                 "${devnum}:${distro_bootpart} "         \
 288                                 "bootfstype; then "                     \
 289                                 "run scan_dev_for_boot; "               \
 290                         "fi; "                  \
 291                 "done\0"                        \
 292         "scan_dev_for_boot="                              \
 293                 "echo Scanning ${devtype} "               \
 294                                 "${devnum}:${distro_bootpart}...; "  \
 295                 "for prefix in ${boot_prefixes}; do "     \
 296                         "run scan_dev_for_scripts; "      \
 297                 "done;"                                   \
 298                 "\0"                                      \
 299         "boot_a_script="                                  \
 300                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 301                         "${scriptaddr} ${prefix}${script}; "    \
 302                 "env exists secureboot && load ${devtype} "     \
 303                         "${devnum}:${distro_bootpart} "         \
 304                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 305                         "env exists secureboot "        \
 306                         "&& esbc_validate ${scripthdraddr};"    \
 307                 "source ${scriptaddr}\0"          \
 308         "installer=load mmc 0:2 $load_addr "    \
 309                 "/flex_installer_arm32.itb; "           \
 310                 "bootm $load_addr#ls1021atwr\0" \
 311         "qspi_bootcmd=echo Trying load from qspi..;"    \
 312                 "sf probe && sf read $load_addr "       \
 313                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 314         "nor_bootcmd=echo Trying load from nor..;"      \
 315                 "cp.b $kernel_addr $load_addr "         \
 316                 "$kernel_size && bootm $load_addr#$board\0"
 317 #else
 318 #define CONFIG_EXTRA_ENV_SETTINGS       \
 319         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 320                 "cma=64M@0x0-0xb0000000\0" \
 321         "initrd_high=0xffffffff\0"      \
 322         "fdt_addr=0x64f00000\0"         \
 323         "kernel_addr=0x61000000\0"      \
 324         "kernelheader_addr=0x60800000\0"        \
 325         "scriptaddr=0x80000000\0"       \
 326         "scripthdraddr=0x80080000\0"    \
 327         "fdtheader_addr_r=0x80100000\0" \
 328         "kernelheader_addr_r=0x80200000\0"      \
 329         "kernel_addr_r=0x81000000\0"    \
 330         "kernelheader_size=0x40000\0"   \
 331         "fdt_addr_r=0x90000000\0"       \
 332         "ramdisk_addr_r=0xa0000000\0"   \
 333         "load_addr=0xa0000000\0"        \
 334         "kernel_size=0x2800000\0"       \
 335         "kernel_addr_sd=0x8000\0"       \
 336         "kernel_size_sd=0x14000\0"      \
 337         "kernelhdr_addr_sd=0x4000\0"            \
 338         "kernelhdr_size_sd=0x10\0"              \
 339         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 340         BOOTENV                         \
 341         "boot_scripts=ls1021atwr_boot.scr\0"    \
 342         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 343                 "scan_dev_for_boot_part="       \
 344                         "part list ${devtype} ${devnum} devplist; "     \
 345                         "env exists devplist || setenv devplist 1; "    \
 346                         "for distro_bootpart in ${devplist}; do "       \
 347                         "if fstype ${devtype} "                         \
 348                                 "${devnum}:${distro_bootpart} "         \
 349                                 "bootfstype; then "                     \
 350                                 "run scan_dev_for_boot; "               \
 351                         "fi; "                  \
 352                 "done\0"                        \
 353         "scan_dev_for_boot="                              \
 354                 "echo Scanning ${devtype} "               \
 355                                 "${devnum}:${distro_bootpart}...; "  \
 356                 "for prefix in ${boot_prefixes}; do "     \
 357                         "run scan_dev_for_scripts; "      \
 358                 "done;"                                   \
 359                 "\0"                                      \
 360         "boot_a_script="                                  \
 361                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 362                         "${scriptaddr} ${prefix}${script}; "    \
 363                 "env exists secureboot && load ${devtype} "     \
 364                         "${devnum}:${distro_bootpart} "         \
 365                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 366                         "&& esbc_validate ${scripthdraddr};"    \
 367                 "source ${scriptaddr}\0"          \
 368         "qspi_bootcmd=echo Trying load from qspi..;"    \
 369                 "sf probe && sf read $load_addr "       \
 370                 "$kernel_addr $kernel_size; env exists secureboot "     \
 371                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 372                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 373                 "bootm $load_addr#$board\0" \
 374         "nor_bootcmd=echo Trying load from nor..;"      \
 375                 "cp.b $kernel_addr $load_addr "         \
 376                 "$kernel_size; env exists secureboot "  \
 377                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 378                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 379                 "bootm $load_addr#$board\0"     \
 380         "sd_bootcmd=echo Trying load from SD ..;"       \
 381                 "mmcinfo && mmc read $load_addr "       \
 382                 "$kernel_addr_sd $kernel_size_sd && "   \
 383                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 384                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 385                 " && esbc_validate ${kernelheader_addr_r};"     \
 386                 "bootm $load_addr#$board\0"
 387 #endif
 388
 389 #undef CONFIG_BOOTCOMMAND
 390 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 391 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 392                            "env exists secureboot && esbc_halt"
 393 #elif defined(CONFIG_SD_BOOT)
 394 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 395                            "env exists secureboot && esbc_halt;"
 396 #else
 397 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 398                            "env exists secureboot && esbc_halt;"
 399 #endif
 400
 401 /*
 402  * Miscellaneous configurable options
 403  */
 404 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 405
 406 #define CONFIG_LS102XA_STREAM_ID
 407
 408 #define CONFIG_SYS_INIT_SP_OFFSET \
 409         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 410 #define CONFIG_SYS_INIT_SP_ADDR \
 411         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 412
 413 #ifdef CONFIG_SPL_BUILD
 414 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 415 #else
 416 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 417 #endif
 418
 419 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 420
 421 /*
 422  * Environment
 423  */
 424
 425 #include <asm/fsl_secure_boot.h>
 426 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 427
 428 #endif