include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI_1_0
  13
  14 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  15
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19 #define CONFIG_DEEP_SLEEP
  20
  21 /*
  22  * Size of malloc() pool
  23  */
  24 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  25
  26 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  27 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  28
  29 /*
  30  * USB
  31  */
  32
  33 /*
  34  * EHCI Support - disbaled by default as
  35  * there is no signal coming out of soc on
  36  * this board for this controller. However,
  37  * the silicon still has this controller,
  38  * and anyone can use this controller by
  39  * taking signals out on their board.
  40  */
  41
  42 /*#define CONFIG_HAS_FSL_DR_USB*/
  43
  44 #ifdef CONFIG_HAS_FSL_DR_USB
  45 #define CONFIG_USB_EHCI
  46 #define CONFIG_USB_EHCI_FSL
  47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  48 #endif
  49
  50 /* XHCI Support - enabled by default */
  51 #define CONFIG_HAS_FSL_XHCI_USB
  52
  53 #ifdef CONFIG_HAS_FSL_XHCI_USB
  54 #define CONFIG_USB_XHCI_FSL
  55 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  56 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  57 #endif
  58
  59 #define CONFIG_SYS_CLK_FREQ             100000000
  60 #define CONFIG_DDR_CLK_FREQ             100000000
  61
  62 #define DDR_SDRAM_CFG                   0x470c0008
  63 #define DDR_CS0_BNDS                    0x008000bf
  64 #define DDR_CS0_CONFIG                  0x80014302
  65 #define DDR_TIMING_CFG_0                0x50550004
  66 #define DDR_TIMING_CFG_1                0xbcb38c56
  67 #define DDR_TIMING_CFG_2                0x0040d120
  68 #define DDR_TIMING_CFG_3                0x010e1000
  69 #define DDR_TIMING_CFG_4                0x00000001
  70 #define DDR_TIMING_CFG_5                0x03401400
  71 #define DDR_SDRAM_CFG_2                 0x00401010
  72 #define DDR_SDRAM_MODE                  0x00061c60
  73 #define DDR_SDRAM_MODE_2                0x00180000
  74 #define DDR_SDRAM_INTERVAL              0x18600618
  75 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  76 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  77 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  78 #define DDR_DDR_CDR1                    0x80040000
  79 #define DDR_DDR_CDR2                    0x00000001
  80 #define DDR_SDRAM_CLK_CNTL              0x02000000
  81 #define DDR_DDR_ZQ_CNTL                 0x89080600
  82 #define DDR_CS0_CONFIG_2                0
  83 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  84 #define SDRAM_CFG2_D_INIT               0x00000010
  85 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  86 #define SDRAM_CFG2_FRC_SR               0x80000000
  87 #define SDRAM_CFG_BI                    0x00000001
  88
  89 #ifdef CONFIG_RAMBOOT_PBL
  90 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  91 #endif
  92
  93 #ifdef CONFIG_SD_BOOT
  94 #ifdef CONFIG_SD_BOOT_QSPI
  95 #define CONFIG_SYS_FSL_PBL_RCW  \
  96         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  97 #else
  98 #define CONFIG_SYS_FSL_PBL_RCW  \
  99         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 100 #endif
 101 #define CONFIG_SPL_FRAMEWORK
 102 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 103
 104 #ifdef CONFIG_SECURE_BOOT
 105 /*
 106  * HDR would be appended at end of image and copied to DDR along
 107  * with U-Boot image.
 108  */
 109 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 110 #endif /* ifdef CONFIG_SECURE_BOOT */
 111
 112 #define CONFIG_SPL_TEXT_BASE            0x10000000
 113 #define CONFIG_SPL_MAX_SIZE             0x1a000
 114 #define CONFIG_SPL_STACK                0x1001d000
 115 #define CONFIG_SPL_PAD_TO               0x1c000
 116 #define CONFIG_SYS_TEXT_BASE            0x82000000
 117
 118 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 119                 CONFIG_SYS_MONITOR_LEN)
 120 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 121 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 122 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 123
 124 #ifdef CONFIG_U_BOOT_HDR_SIZE
 125 /*
 126  * HDR would be appended at end of image and copied to DDR along
 127  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 128  * size increases then increase this size in case of secure boot as
 129  * it uses raw u-boot image instead of fit image.
 130  */
 131 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 132 #else
 133 #define CONFIG_SYS_MONITOR_LEN          0x100000
 134 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 135 #endif
 136
 137 #ifdef CONFIG_QSPI_BOOT
 138 #define CONFIG_SYS_TEXT_BASE            0x40010000
 139 #endif
 140
 141 #ifndef CONFIG_SYS_TEXT_BASE
 142 #define CONFIG_SYS_TEXT_BASE            0x60100000
 143 #endif
 144
 145 #define CONFIG_NR_DRAM_BANKS            1
 146 #define PHYS_SDRAM                      0x80000000
 147 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 148
 149 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 150 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 151
 152 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 153         !defined(CONFIG_QSPI_BOOT)
 154 #define CONFIG_U_QE
 155 #endif
 156
 157 /*
 158  * IFC Definitions
 159  */
 160 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 161 #define CONFIG_FSL_IFC
 162 #define CONFIG_SYS_FLASH_BASE           0x60000000
 163 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 164
 165 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 166 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 167                                 CSPR_PORT_SIZE_16 | \
 168                                 CSPR_MSEL_NOR | \
 169                                 CSPR_V)
 170 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 171
 172 /* NOR Flash Timing Params */
 173 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 174                                         CSOR_NOR_TRHZ_80)
 175 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 176                                         FTIM0_NOR_TEADC(0x5) | \
 177                                         FTIM0_NOR_TAVDS(0x0) | \
 178                                         FTIM0_NOR_TEAHC(0x5))
 179 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 180                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 181                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 182 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 183                                         FTIM2_NOR_TCH(0x4) | \
 184                                         FTIM2_NOR_TWP(0x1c) | \
 185                                         FTIM2_NOR_TWPH(0x0e))
 186 #define CONFIG_SYS_NOR_FTIM3            0
 187
 188 #define CONFIG_FLASH_CFI_DRIVER
 189 #define CONFIG_SYS_FLASH_CFI
 190 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 191 #define CONFIG_SYS_FLASH_QUIET_TEST
 192 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 193
 194 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 195 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 196 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 197 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 198
 199 #define CONFIG_SYS_FLASH_EMPTY_INFO
 200 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 201
 202 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 203 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 204 #endif
 205
 206 /* CPLD */
 207
 208 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 209 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 210
 211 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 212 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 213                                         CSPR_PORT_SIZE_8 | \
 214                                         CSPR_MSEL_GPCM | \
 215                                         CSPR_V)
 216 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 217 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 218                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 219                                         CSOR_NOR_TRHZ_80)
 220
 221 /* CPLD Timing parameters for IFC GPCM */
 222 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 223                                         FTIM0_GPCM_TEADC(0xf) | \
 224                                         FTIM0_GPCM_TEAHC(0xf))
 225 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 226                                         FTIM1_GPCM_TRAD(0x3f))
 227 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 228                                         FTIM2_GPCM_TCH(0xf) | \
 229                                         FTIM2_GPCM_TWP(0xff))
 230 #define CONFIG_SYS_FPGA_FTIM3           0x0
 231 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 232 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 233 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 234 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 235 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 236 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 237 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 238 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 239 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 240 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 241 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 242 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 243 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 244 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 245 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 246 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 247
 248 /*
 249  * Serial Port
 250  */
 251 #ifdef CONFIG_LPUART
 252 #define CONFIG_LPUART_32B_REG
 253 #else
 254 #define CONFIG_CONS_INDEX               1
 255 #define CONFIG_SYS_NS16550_SERIAL
 256 #ifndef CONFIG_DM_SERIAL
 257 #define CONFIG_SYS_NS16550_REG_SIZE     1
 258 #endif
 259 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 260 #endif
 261
 262 /*
 263  * I2C
 264  */
 265 #define CONFIG_SYS_I2C
 266 #define CONFIG_SYS_I2C_MXC
 267 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 268 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 269 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 270
 271 /* EEPROM */
 272 #define CONFIG_ID_EEPROM
 273 #define CONFIG_SYS_I2C_EEPROM_NXID
 274 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 275 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 276 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 277 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 278 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 279
 280 /*
 281  * MMC
 282  */
 283 #define CONFIG_FSL_ESDHC
 284
 285 /* SPI */
 286 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 287 /* QSPI */
 288 #define QSPI0_AMBA_BASE                 0x40000000
 289 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 290 #define FSL_QSPI_FLASH_NUM              2
 291
 292 /* DSPI */
 293 #endif
 294
 295 /* DM SPI */
 296 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 297 #define CONFIG_DM_SPI_FLASH
 298 #endif
 299
 300 /*
 301  * Video
 302  */
 303 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 304 #define CONFIG_CMD_BMP
 305 #define CONFIG_VIDEO_LOGO
 306 #define CONFIG_VIDEO_BMP_LOGO
 307
 308 #define CONFIG_FSL_DCU_SII9022A
 309 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 310 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 311 #endif
 312
 313 /*
 314  * eTSEC
 315  */
 316 #define CONFIG_TSEC_ENET
 317
 318 #ifdef CONFIG_TSEC_ENET
 319 #define CONFIG_MII
 320 #define CONFIG_MII_DEFAULT_TSEC         1
 321 #define CONFIG_TSEC1                    1
 322 #define CONFIG_TSEC1_NAME               "eTSEC1"
 323 #define CONFIG_TSEC2                    1
 324 #define CONFIG_TSEC2_NAME               "eTSEC2"
 325 #define CONFIG_TSEC3                    1
 326 #define CONFIG_TSEC3_NAME               "eTSEC3"
 327
 328 #define TSEC1_PHY_ADDR                  2
 329 #define TSEC2_PHY_ADDR                  0
 330 #define TSEC3_PHY_ADDR                  1
 331
 332 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 333 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 334 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 335
 336 #define TSEC1_PHYIDX                    0
 337 #define TSEC2_PHYIDX                    0
 338 #define TSEC3_PHYIDX                    0
 339
 340 #define CONFIG_ETHPRIME                 "eTSEC1"
 341
 342 #define CONFIG_PHY_GIGE
 343 #define CONFIG_PHYLIB
 344 #define CONFIG_PHY_ATHEROS
 345
 346 #define CONFIG_HAS_ETH0
 347 #define CONFIG_HAS_ETH1
 348 #define CONFIG_HAS_ETH2
 349 #endif
 350
 351 /* PCIe */
 352 #define CONFIG_PCIE1            /* PCIE controller 1 */
 353 #define CONFIG_PCIE2            /* PCIE controller 2 */
 354
 355 #ifdef CONFIG_PCI
 356 #define CONFIG_PCI_SCAN_SHOW
 357 #define CONFIG_CMD_PCI
 358 #endif
 359
 360 #define CONFIG_CMDLINE_TAG
 361 #define CONFIG_CMDLINE_EDITING
 362
 363 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 364 #define CONFIG_LAYERSCAPE_NS_ACCESS
 365 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 366 #define COUNTER_FREQUENCY               12500000
 367
 368 #define CONFIG_HWCONFIG
 369 #define HWCONFIG_BUFFER_SIZE            256
 370
 371 #define CONFIG_FSL_DEVICE_DISABLE
 372
 373
 374 #ifdef CONFIG_LPUART
 375 #define CONFIG_EXTRA_ENV_SETTINGS       \
 376         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 377         "initrd_high=0xffffffff\0"      \
 378         "fdt_high=0xffffffff\0"
 379 #else
 380 #define CONFIG_EXTRA_ENV_SETTINGS       \
 381         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 382         "initrd_high=0xffffffff\0"      \
 383         "fdt_high=0xffffffff\0"
 384 #endif
 385
 386 /*
 387  * Miscellaneous configurable options
 388  */
 389 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 390 #define CONFIG_AUTO_COMPLETE
 391 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 392 #define CONFIG_SYS_PBSIZE               \
 393                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 394 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 395 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 396
 397 #define CONFIG_SYS_MEMTEST_START        0x80000000
 398 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 399
 400 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 401
 402 #define CONFIG_LS102XA_STREAM_ID
 403
 404 #define CONFIG_SYS_INIT_SP_OFFSET \
 405         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 406 #define CONFIG_SYS_INIT_SP_ADDR \
 407         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 408
 409 #ifdef CONFIG_SPL_BUILD
 410 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 411 #else
 412 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 413 #endif
 414
 415 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 416
 417 /*
 418  * Environment
 419  */
 420 #define CONFIG_ENV_OVERWRITE
 421
 422 #if defined(CONFIG_SD_BOOT)
 423 #define CONFIG_ENV_OFFSET               0x100000
 424 #define CONFIG_ENV_IS_IN_MMC
 425 #define CONFIG_SYS_MMC_ENV_DEV          0
 426 #define CONFIG_ENV_SIZE                 0x20000
 427 #elif defined(CONFIG_QSPI_BOOT)
 428 #define CONFIG_ENV_IS_IN_SPI_FLASH
 429 #define CONFIG_ENV_SIZE                 0x2000
 430 #define CONFIG_ENV_OFFSET               0x100000
 431 #define CONFIG_ENV_SECT_SIZE            0x10000
 432 #else
 433 #define CONFIG_ENV_IS_IN_FLASH
 434 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 435 #define CONFIG_ENV_SIZE                 0x20000
 436 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 437 #endif
 438
 439 #define CONFIG_MISC_INIT_R
 440
 441 /* Hash command with SHA acceleration supported in hardware */
 442 #ifdef CONFIG_FSL_CAAM
 443 #define CONFIG_CMD_HASH
 444 #define CONFIG_SHA_HW_ACCEL
 445 #endif
 446
 447 #include <asm/fsl_secure_boot.h>
 448 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 449
 450 #endif