include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI
  13 #define CONFIG_ARMV7_PSCI_1_0
  14 #define CONFIG_ARMV7_PSCI_NR_CPUS       CONFIG_MAX_CPUS
  15
  16 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  17
  18 #define CONFIG_SYS_FSL_CLK
  19
  20 #define CONFIG_DISPLAY_CPUINFO
  21 #define CONFIG_DISPLAY_BOARDINFO
  22
  23 #define CONFIG_SKIP_LOWLEVEL_INIT
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_DEEP_SLEEP
  26 #ifdef CONFIG_DEEP_SLEEP
  27 #define CONFIG_SILENT_CONSOLE
  28 #endif
  29
  30 /*
  31  * Size of malloc() pool
  32  */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  34
  35 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  36 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  37
  38 /*
  39  * USB
  40  */
  41
  42 /*
  43  * EHCI Support - disbaled by default as
  44  * there is no signal coming out of soc on
  45  * this board for this controller. However,
  46  * the silicon still has this controller,
  47  * and anyone can use this controller by
  48  * taking signals out on their board.
  49  */
  50
  51 /*#define CONFIG_HAS_FSL_DR_USB*/
  52
  53 #ifdef CONFIG_HAS_FSL_DR_USB
  54 #define CONFIG_USB_EHCI
  55 #define CONFIG_USB_EHCI_FSL
  56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  57 #endif
  58
  59 /* XHCI Support - enabled by default */
  60 #define CONFIG_HAS_FSL_XHCI_USB
  61
  62 #ifdef CONFIG_HAS_FSL_XHCI_USB
  63 #define CONFIG_USB_XHCI_FSL
  64 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  65 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  66 #endif
  67
  68 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  69 #define CONFIG_USB_STORAGE
  70 #endif
  71
  72 /*
  73  * Generic Timer Definitions
  74  */
  75 #define GENERIC_TIMER_CLK               12500000
  76
  77 #define CONFIG_SYS_CLK_FREQ             100000000
  78 #define CONFIG_DDR_CLK_FREQ             100000000
  79
  80 #define DDR_SDRAM_CFG                   0x470c0008
  81 #define DDR_CS0_BNDS                    0x008000bf
  82 #define DDR_CS0_CONFIG                  0x80014302
  83 #define DDR_TIMING_CFG_0                0x50550004
  84 #define DDR_TIMING_CFG_1                0xbcb38c56
  85 #define DDR_TIMING_CFG_2                0x0040d120
  86 #define DDR_TIMING_CFG_3                0x010e1000
  87 #define DDR_TIMING_CFG_4                0x00000001
  88 #define DDR_TIMING_CFG_5                0x03401400
  89 #define DDR_SDRAM_CFG_2                 0x00401010
  90 #define DDR_SDRAM_MODE                  0x00061c60
  91 #define DDR_SDRAM_MODE_2                0x00180000
  92 #define DDR_SDRAM_INTERVAL              0x18600618
  93 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  94 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  95 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  96 #define DDR_DDR_CDR1                    0x80040000
  97 #define DDR_DDR_CDR2                    0x00000001
  98 #define DDR_SDRAM_CLK_CNTL              0x02000000
  99 #define DDR_DDR_ZQ_CNTL                 0x89080600
 100 #define DDR_CS0_CONFIG_2                0
 101 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
 102 #define SDRAM_CFG2_D_INIT               0x00000010
 103 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
 104 #define SDRAM_CFG2_FRC_SR               0x80000000
 105 #define SDRAM_CFG_BI                    0x00000001
 106
 107 #ifdef CONFIG_RAMBOOT_PBL
 108 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
 109 #endif
 110
 111 #ifdef CONFIG_SD_BOOT
 112 #ifdef CONFIG_SD_BOOT_QSPI
 113 #define CONFIG_SYS_FSL_PBL_RCW  \
 114         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 115 #else
 116 #define CONFIG_SYS_FSL_PBL_RCW  \
 117         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 118 #endif
 119 #define CONFIG_SPL_FRAMEWORK
 120 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 121 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 122 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 123 #define CONFIG_SPL_ENV_SUPPORT
 124 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 125 #define CONFIG_SPL_I2C_SUPPORT
 126 #define CONFIG_SPL_WATCHDOG_SUPPORT
 127 #define CONFIG_SPL_SERIAL_SUPPORT
 128 #define CONFIG_SPL_MMC_SUPPORT
 129 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0xe8
 130
 131 #ifdef CONFIG_SECURE_BOOT
 132 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 133 /*
 134  * HDR would be appended at end of image and copied to DDR along
 135  * with U-Boot image.
 136  */
 137 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              (0x400 + \
 138                 (CONFIG_U_BOOT_HDR_SIZE / 512)
 139 #else
 140 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              0x400
 141 #endif /* ifdef CONFIG_SECURE_BOOT */
 142
 143 #define CONFIG_SPL_TEXT_BASE            0x10000000
 144 #define CONFIG_SPL_MAX_SIZE             0x1a000
 145 #define CONFIG_SPL_STACK                0x1001d000
 146 #define CONFIG_SPL_PAD_TO               0x1c000
 147 #define CONFIG_SYS_TEXT_BASE            0x82000000
 148
 149 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 150                 CONFIG_SYS_MONITOR_LEN)
 151 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 152 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 153 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 154
 155 #ifdef CONFIG_U_BOOT_HDR_SIZE
 156 /*
 157  * HDR would be appended at end of image and copied to DDR along
 158  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 159  * size increases then increase this size in case of secure boot as
 160  * it uses raw u-boot image instead of fit image.
 161  */
 162 #define CONFIG_SYS_MONITOR_LEN          (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
 163 #else
 164 #define CONFIG_SYS_MONITOR_LEN          0x80000
 165 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 166 #endif
 167
 168 #ifdef CONFIG_QSPI_BOOT
 169 #define CONFIG_SYS_TEXT_BASE            0x40010000
 170 #endif
 171
 172 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 173 #define CONFIG_SYS_NO_FLASH
 174 #endif
 175
 176 #ifndef CONFIG_SYS_TEXT_BASE
 177 #define CONFIG_SYS_TEXT_BASE            0x60100000
 178 #endif
 179
 180 #define CONFIG_NR_DRAM_BANKS            1
 181 #define PHYS_SDRAM                      0x80000000
 182 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 183
 184 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 185 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 186
 187 #define CONFIG_SYS_HAS_SERDES
 188
 189 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 190
 191 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 192         !defined(CONFIG_QSPI_BOOT)
 193 #define CONFIG_U_QE
 194 #endif
 195
 196 /*
 197  * IFC Definitions
 198  */
 199 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 200 #define CONFIG_FSL_IFC
 201 #define CONFIG_SYS_FLASH_BASE           0x60000000
 202 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 203
 204 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 205 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 206                                 CSPR_PORT_SIZE_16 | \
 207                                 CSPR_MSEL_NOR | \
 208                                 CSPR_V)
 209 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 210
 211 /* NOR Flash Timing Params */
 212 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 213                                         CSOR_NOR_TRHZ_80)
 214 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 215                                         FTIM0_NOR_TEADC(0x5) | \
 216                                         FTIM0_NOR_TAVDS(0x0) | \
 217                                         FTIM0_NOR_TEAHC(0x5))
 218 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 219                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 220                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 221 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 222                                         FTIM2_NOR_TCH(0x4) | \
 223                                         FTIM2_NOR_TWP(0x1c) | \
 224                                         FTIM2_NOR_TWPH(0x0e))
 225 #define CONFIG_SYS_NOR_FTIM3            0
 226
 227 #define CONFIG_FLASH_CFI_DRIVER
 228 #define CONFIG_SYS_FLASH_CFI
 229 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 230 #define CONFIG_SYS_FLASH_QUIET_TEST
 231 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 232
 233 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 234 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 235 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 236 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 237
 238 #define CONFIG_SYS_FLASH_EMPTY_INFO
 239 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 240
 241 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 242 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 243 #endif
 244
 245 /* CPLD */
 246
 247 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 248 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 249
 250 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 251 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 252                                         CSPR_PORT_SIZE_8 | \
 253                                         CSPR_MSEL_GPCM | \
 254                                         CSPR_V)
 255 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 256 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 257                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 258                                         CSOR_NOR_TRHZ_80)
 259
 260 /* CPLD Timing parameters for IFC GPCM */
 261 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 262                                         FTIM0_GPCM_TEADC(0xf) | \
 263                                         FTIM0_GPCM_TEAHC(0xf))
 264 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 265                                         FTIM1_GPCM_TRAD(0x3f))
 266 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 267                                         FTIM2_GPCM_TCH(0xf) | \
 268                                         FTIM2_GPCM_TWP(0xff))
 269 #define CONFIG_SYS_FPGA_FTIM3           0x0
 270 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 271 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 272 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 273 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 274 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 275 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 276 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 277 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 278 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 279 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 280 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 281 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 282 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 283 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 284 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 285 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 286
 287 /*
 288  * Serial Port
 289  */
 290 #ifdef CONFIG_LPUART
 291 #define CONFIG_LPUART_32B_REG
 292 #else
 293 #define CONFIG_CONS_INDEX               1
 294 #define CONFIG_SYS_NS16550_SERIAL
 295 #ifndef CONFIG_DM_SERIAL
 296 #define CONFIG_SYS_NS16550_REG_SIZE     1
 297 #endif
 298 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 299 #endif
 300
 301 #define CONFIG_BAUDRATE                 115200
 302
 303 /*
 304  * I2C
 305  */
 306 #define CONFIG_SYS_I2C
 307 #define CONFIG_SYS_I2C_MXC
 308 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 309 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 310 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 311
 312 /* EEPROM */
 313 #define CONFIG_ID_EEPROM
 314 #define CONFIG_SYS_I2C_EEPROM_NXID
 315 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 316 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 317 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 318 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 319 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 320
 321 /*
 322  * MMC
 323  */
 324 #define CONFIG_MMC
 325 #define CONFIG_FSL_ESDHC
 326 #define CONFIG_GENERIC_MMC
 327
 328 #define CONFIG_DOS_PARTITION
 329
 330 /* SPI */
 331 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 332 /* QSPI */
 333 #define QSPI0_AMBA_BASE                 0x40000000
 334 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 335 #define FSL_QSPI_FLASH_NUM              2
 336
 337 /* DSPI */
 338 #endif
 339
 340 /* DM SPI */
 341 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 342 #define CONFIG_DM_SPI_FLASH
 343 #endif
 344
 345 /*
 346  * Video
 347  */
 348 #define CONFIG_FSL_DCU_FB
 349
 350 #ifdef CONFIG_FSL_DCU_FB
 351 #define CONFIG_VIDEO
 352 #define CONFIG_CMD_BMP
 353 #define CONFIG_CFB_CONSOLE
 354 #define CONFIG_VGA_AS_SINGLE_DEVICE
 355 #define CONFIG_VIDEO_LOGO
 356 #define CONFIG_VIDEO_BMP_LOGO
 357 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 358
 359 #define CONFIG_FSL_DCU_SII9022A
 360 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 361 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 362 #endif
 363
 364 /*
 365  * eTSEC
 366  */
 367 #define CONFIG_TSEC_ENET
 368
 369 #ifdef CONFIG_TSEC_ENET
 370 #define CONFIG_MII
 371 #define CONFIG_MII_DEFAULT_TSEC         1
 372 #define CONFIG_TSEC1                    1
 373 #define CONFIG_TSEC1_NAME               "eTSEC1"
 374 #define CONFIG_TSEC2                    1
 375 #define CONFIG_TSEC2_NAME               "eTSEC2"
 376 #define CONFIG_TSEC3                    1
 377 #define CONFIG_TSEC3_NAME               "eTSEC3"
 378
 379 #define TSEC1_PHY_ADDR                  2
 380 #define TSEC2_PHY_ADDR                  0
 381 #define TSEC3_PHY_ADDR                  1
 382
 383 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 384 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 385 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 386
 387 #define TSEC1_PHYIDX                    0
 388 #define TSEC2_PHYIDX                    0
 389 #define TSEC3_PHYIDX                    0
 390
 391 #define CONFIG_ETHPRIME                 "eTSEC1"
 392
 393 #define CONFIG_PHY_GIGE
 394 #define CONFIG_PHYLIB
 395 #define CONFIG_PHY_ATHEROS
 396
 397 #define CONFIG_HAS_ETH0
 398 #define CONFIG_HAS_ETH1
 399 #define CONFIG_HAS_ETH2
 400 #endif
 401
 402 /* PCIe */
 403 #define CONFIG_PCI              /* Enable PCI/PCIE */
 404 #define CONFIG_PCIE1            /* PCIE controller 1 */
 405 #define CONFIG_PCIE2            /* PCIE controller 2 */
 406 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 407 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 408
 409 #define CONFIG_SYS_PCI_64BIT
 410
 411 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 412 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 413 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 414 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 415
 416 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 417 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 418 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 419
 420 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 421 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 422 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 423
 424 #ifdef CONFIG_PCI
 425 #define CONFIG_PCI_PNP
 426 #define CONFIG_PCI_SCAN_SHOW
 427 #define CONFIG_CMD_PCI
 428 #endif
 429
 430 #define CONFIG_CMDLINE_TAG
 431 #define CONFIG_CMDLINE_EDITING
 432
 433 #define CONFIG_ARMV7_NONSEC
 434 #define CONFIG_ARMV7_VIRT
 435 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 436 #define CONFIG_LAYERSCAPE_NS_ACCESS
 437 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 438 #define CONFIG_TIMER_CLK_FREQ           12500000
 439
 440 #define CONFIG_HWCONFIG
 441 #define HWCONFIG_BUFFER_SIZE            256
 442
 443 #define CONFIG_FSL_DEVICE_DISABLE
 444
 445
 446 #ifdef CONFIG_LPUART
 447 #define CONFIG_EXTRA_ENV_SETTINGS       \
 448         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 449         "initrd_high=0xffffffff\0"      \
 450         "fdt_high=0xffffffff\0"
 451 #else
 452 #define CONFIG_EXTRA_ENV_SETTINGS       \
 453         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 454         "initrd_high=0xffffffff\0"      \
 455         "fdt_high=0xffffffff\0"
 456 #endif
 457
 458 /*
 459  * Miscellaneous configurable options
 460  */
 461 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 462 #define CONFIG_AUTO_COMPLETE
 463 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 464 #define CONFIG_SYS_PBSIZE               \
 465                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 466 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 467 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 468
 469 #define CONFIG_SYS_MEMTEST_START        0x80000000
 470 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 471
 472 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 473
 474 #define CONFIG_LS102XA_STREAM_ID
 475
 476 /*
 477  * Stack sizes
 478  * The stack sizes are set up in start.S using the settings below
 479  */
 480 #define CONFIG_STACKSIZE                (30 * 1024)
 481
 482 #define CONFIG_SYS_INIT_SP_OFFSET \
 483         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 484 #define CONFIG_SYS_INIT_SP_ADDR \
 485         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 486
 487 #ifdef CONFIG_SPL_BUILD
 488 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 489 #else
 490 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 491 #endif
 492
 493 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 494
 495 /*
 496  * Environment
 497  */
 498 #define CONFIG_ENV_OVERWRITE
 499
 500 #if defined(CONFIG_SD_BOOT)
 501 #define CONFIG_ENV_OFFSET               0x100000
 502 #define CONFIG_ENV_IS_IN_MMC
 503 #define CONFIG_SYS_MMC_ENV_DEV          0
 504 #define CONFIG_ENV_SIZE                 0x20000
 505 #elif defined(CONFIG_QSPI_BOOT)
 506 #define CONFIG_ENV_IS_IN_SPI_FLASH
 507 #define CONFIG_ENV_SIZE                 0x2000
 508 #define CONFIG_ENV_OFFSET               0x100000
 509 #define CONFIG_ENV_SECT_SIZE            0x10000
 510 #else
 511 #define CONFIG_ENV_IS_IN_FLASH
 512 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 513 #define CONFIG_ENV_SIZE                 0x20000
 514 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 515 #endif
 516
 517 #define CONFIG_MISC_INIT_R
 518
 519 /* Hash command with SHA acceleration supported in hardware */
 520 #ifdef CONFIG_FSL_CAAM
 521 #define CONFIG_CMD_HASH
 522 #define CONFIG_SHA_HW_ACCEL
 523 #endif
 524
 525 #include <asm/fsl_secure_boot.h>
 526 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 527
 528 #endif