include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_DEEP_SLEEP
  13
  14 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  15 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  16
  17 #define DDR_SDRAM_CFG                   0x470c0008
  18 #define DDR_CS0_BNDS                    0x008000bf
  19 #define DDR_CS0_CONFIG                  0x80014302
  20 #define DDR_TIMING_CFG_0                0x50550004
  21 #define DDR_TIMING_CFG_1                0xbcb38c56
  22 #define DDR_TIMING_CFG_2                0x0040d120
  23 #define DDR_TIMING_CFG_3                0x010e1000
  24 #define DDR_TIMING_CFG_4                0x00000001
  25 #define DDR_TIMING_CFG_5                0x03401400
  26 #define DDR_SDRAM_CFG_2                 0x00401010
  27 #define DDR_SDRAM_MODE                  0x00061c60
  28 #define DDR_SDRAM_MODE_2                0x00180000
  29 #define DDR_SDRAM_INTERVAL              0x18600618
  30 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  31 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  32 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  33 #define DDR_DDR_CDR1                    0x80040000
  34 #define DDR_DDR_CDR2                    0x00000001
  35 #define DDR_SDRAM_CLK_CNTL              0x02000000
  36 #define DDR_DDR_ZQ_CNTL                 0x89080600
  37 #define DDR_CS0_CONFIG_2                0
  38 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  39 #define SDRAM_CFG2_D_INIT               0x00000010
  40 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  41 #define SDRAM_CFG2_FRC_SR               0x80000000
  42 #define SDRAM_CFG_BI                    0x00000001
  43
  44 #ifdef CONFIG_SD_BOOT
  45 #ifdef CONFIG_NXP_ESBC
  46 /*
  47  * HDR would be appended at end of image and copied to DDR along
  48  * with U-Boot image.
  49  */
  50 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  51 #endif /* ifdef CONFIG_NXP_ESBC */
  52
  53 #define CONFIG_SPL_MAX_SIZE             0x1a000
  54 #define CONFIG_SPL_STACK                0x1001d000
  55 #define CONFIG_SPL_PAD_TO               0x1c000
  56
  57 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  58                 CONFIG_SYS_MONITOR_LEN)
  59 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  60 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  61 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  62
  63 #ifdef CONFIG_U_BOOT_HDR_SIZE
  64 /*
  65  * HDR would be appended at end of image and copied to DDR along
  66  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  67  * size increases then increase this size in case of secure boot as
  68  * it uses raw u-boot image instead of fit image.
  69  */
  70 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  71 #else
  72 #define CONFIG_SYS_MONITOR_LEN          0x100000
  73 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  74 #endif
  75
  76 #define PHYS_SDRAM                      0x80000000
  77 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  78
  79 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
  80 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
  81
  82 /*
  83  * IFC Definitions
  84  */
  85 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  86 #define CONFIG_SYS_FLASH_BASE           0x60000000
  87 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
  88
  89 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  90 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
  91                                 CSPR_PORT_SIZE_16 | \
  92                                 CSPR_MSEL_NOR | \
  93                                 CSPR_V)
  94 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
  95
  96 /* NOR Flash Timing Params */
  97 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
  98                                         CSOR_NOR_TRHZ_80)
  99 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 100                                         FTIM0_NOR_TEADC(0x5) | \
 101                                         FTIM0_NOR_TAVDS(0x0) | \
 102                                         FTIM0_NOR_TEAHC(0x5))
 103 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 104                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 105                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 106 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 107                                         FTIM2_NOR_TCH(0x4) | \
 108                                         FTIM2_NOR_TWP(0x1c) | \
 109                                         FTIM2_NOR_TWPH(0x0e))
 110 #define CONFIG_SYS_NOR_FTIM3            0
 111
 112 #define CONFIG_SYS_FLASH_QUIET_TEST
 113 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 114
 115 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 116 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 117 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 118
 119 #define CONFIG_SYS_FLASH_EMPTY_INFO
 120 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 121
 122 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 123 #endif
 124
 125 /* CPLD */
 126
 127 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 128 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 129
 130 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 131 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 132                                         CSPR_PORT_SIZE_8 | \
 133                                         CSPR_MSEL_GPCM | \
 134                                         CSPR_V)
 135 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 136 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 137                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 138                                         CSOR_NOR_TRHZ_80)
 139
 140 /* CPLD Timing parameters for IFC GPCM */
 141 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 142                                         FTIM0_GPCM_TEADC(0xf) | \
 143                                         FTIM0_GPCM_TEAHC(0xf))
 144 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 145                                         FTIM1_GPCM_TRAD(0x3f))
 146 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 147                                         FTIM2_GPCM_TCH(0xf) | \
 148                                         FTIM2_GPCM_TWP(0xff))
 149 #define CONFIG_SYS_FPGA_FTIM3           0x0
 150 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 151 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 152 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 153 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 154 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 155 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 156 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 157 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 158 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 159 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 160 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 161 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 162 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 163 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 164 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 165 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 166
 167 /*
 168  * Serial Port
 169  */
 170 #ifdef CONFIG_LPUART
 171 #define CONFIG_LPUART_32B_REG
 172 #else
 173 #define CONFIG_SYS_NS16550_SERIAL
 174 #ifndef CONFIG_DM_SERIAL
 175 #define CONFIG_SYS_NS16550_REG_SIZE     1
 176 #endif
 177 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 178 #endif
 179
 180 /*
 181  * I2C
 182  */
 183
 184 /* GPIO */
 185
 186 /* EEPROM */
 187 #define CONFIG_SYS_I2C_EEPROM_NXID
 188 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 189
 190 /*
 191  * MMC
 192  */
 193
 194 /*
 195  * Video
 196  */
 197 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 198 #define CONFIG_VIDEO_BMP_LOGO
 199
 200 #define CONFIG_FSL_DCU_SII9022A
 201 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 202 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 203 #endif
 204
 205 /*
 206  * eTSEC
 207  */
 208
 209 #ifdef CONFIG_TSEC_ENET
 210 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 211 #endif
 212
 213 /* PCIe */
 214 #define CONFIG_PCIE1            /* PCIE controller 1 */
 215 #define CONFIG_PCIE2            /* PCIE controller 2 */
 216
 217 #ifdef CONFIG_PCI
 218 #define CONFIG_PCI_SCAN_SHOW
 219 #endif
 220
 221 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 222 #define CONFIG_LAYERSCAPE_NS_ACCESS
 223 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 224 #define COUNTER_FREQUENCY               12500000
 225
 226 #define CONFIG_HWCONFIG
 227 #define HWCONFIG_BUFFER_SIZE            256
 228
 229 #define CONFIG_FSL_DEVICE_DISABLE
 230
 231 #define BOOT_TARGET_DEVICES(func) \
 232         func(MMC, mmc, 0) \
 233         func(USB, usb, 0) \
 234         func(DHCP, dhcp, na)
 235 #include <config_distro_bootcmd.h>
 236
 237 #ifdef CONFIG_LPUART
 238 #define CONFIG_EXTRA_ENV_SETTINGS       \
 239         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 240                 "cma=64M@0x0-0xb0000000\0" \
 241         "initrd_high=0xffffffff\0"      \
 242         "fdt_addr=0x64f00000\0"         \
 243         "kernel_addr=0x65000000\0"      \
 244         "scriptaddr=0x80000000\0"       \
 245         "scripthdraddr=0x80080000\0"    \
 246         "fdtheader_addr_r=0x80100000\0" \
 247         "kernelheader_addr_r=0x80200000\0"      \
 248         "kernel_addr_r=0x81000000\0"    \
 249         "fdt_addr_r=0x90000000\0"       \
 250         "ramdisk_addr_r=0xa0000000\0"   \
 251         "load_addr=0xa0000000\0"        \
 252         "kernel_size=0x2800000\0"       \
 253         "kernel_addr_sd=0x8000\0"       \
 254         "kernel_size_sd=0x14000\0"      \
 255         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 256         BOOTENV                         \
 257         "boot_scripts=ls1021atwr_boot.scr\0"    \
 258         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 259                 "scan_dev_for_boot_part="       \
 260                         "part list ${devtype} ${devnum} devplist; "     \
 261                         "env exists devplist || setenv devplist 1; "    \
 262                         "for distro_bootpart in ${devplist}; do "       \
 263                         "if fstype ${devtype} "                         \
 264                                 "${devnum}:${distro_bootpart} "         \
 265                                 "bootfstype; then "                     \
 266                                 "run scan_dev_for_boot; "               \
 267                         "fi; "                  \
 268                 "done\0"                        \
 269         "scan_dev_for_boot="                              \
 270                 "echo Scanning ${devtype} "               \
 271                                 "${devnum}:${distro_bootpart}...; "  \
 272                 "for prefix in ${boot_prefixes}; do "     \
 273                         "run scan_dev_for_scripts; "      \
 274                 "done;"                                   \
 275                 "\0"                                      \
 276         "boot_a_script="                                  \
 277                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 278                         "${scriptaddr} ${prefix}${script}; "    \
 279                 "env exists secureboot && load ${devtype} "     \
 280                         "${devnum}:${distro_bootpart} "         \
 281                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 282                         "env exists secureboot "        \
 283                         "&& esbc_validate ${scripthdraddr};"    \
 284                 "source ${scriptaddr}\0"          \
 285         "installer=load mmc 0:2 $load_addr "    \
 286                 "/flex_installer_arm32.itb; "           \
 287                 "bootm $load_addr#ls1021atwr\0" \
 288         "qspi_bootcmd=echo Trying load from qspi..;"    \
 289                 "sf probe && sf read $load_addr "       \
 290                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 291         "nor_bootcmd=echo Trying load from nor..;"      \
 292                 "cp.b $kernel_addr $load_addr "         \
 293                 "$kernel_size && bootm $load_addr#$board\0"
 294 #else
 295 #define CONFIG_EXTRA_ENV_SETTINGS       \
 296         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 297                 "cma=64M@0x0-0xb0000000\0" \
 298         "initrd_high=0xffffffff\0"      \
 299         "fdt_addr=0x64f00000\0"         \
 300         "kernel_addr=0x61000000\0"      \
 301         "kernelheader_addr=0x60800000\0"        \
 302         "scriptaddr=0x80000000\0"       \
 303         "scripthdraddr=0x80080000\0"    \
 304         "fdtheader_addr_r=0x80100000\0" \
 305         "kernelheader_addr_r=0x80200000\0"      \
 306         "kernel_addr_r=0x81000000\0"    \
 307         "kernelheader_size=0x40000\0"   \
 308         "fdt_addr_r=0x90000000\0"       \
 309         "ramdisk_addr_r=0xa0000000\0"   \
 310         "load_addr=0xa0000000\0"        \
 311         "kernel_size=0x2800000\0"       \
 312         "kernel_addr_sd=0x8000\0"       \
 313         "kernel_size_sd=0x14000\0"      \
 314         "kernelhdr_addr_sd=0x4000\0"            \
 315         "kernelhdr_size_sd=0x10\0"              \
 316         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 317         BOOTENV                         \
 318         "boot_scripts=ls1021atwr_boot.scr\0"    \
 319         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 320                 "scan_dev_for_boot_part="       \
 321                         "part list ${devtype} ${devnum} devplist; "     \
 322                         "env exists devplist || setenv devplist 1; "    \
 323                         "for distro_bootpart in ${devplist}; do "       \
 324                         "if fstype ${devtype} "                         \
 325                                 "${devnum}:${distro_bootpart} "         \
 326                                 "bootfstype; then "                     \
 327                                 "run scan_dev_for_boot; "               \
 328                         "fi; "                  \
 329                 "done\0"                        \
 330         "scan_dev_for_boot="                              \
 331                 "echo Scanning ${devtype} "               \
 332                                 "${devnum}:${distro_bootpart}...; "  \
 333                 "for prefix in ${boot_prefixes}; do "     \
 334                         "run scan_dev_for_scripts; "      \
 335                 "done;"                                   \
 336                 "\0"                                      \
 337         "boot_a_script="                                  \
 338                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 339                         "${scriptaddr} ${prefix}${script}; "    \
 340                 "env exists secureboot && load ${devtype} "     \
 341                         "${devnum}:${distro_bootpart} "         \
 342                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 343                         "&& esbc_validate ${scripthdraddr};"    \
 344                 "source ${scriptaddr}\0"          \
 345         "qspi_bootcmd=echo Trying load from qspi..;"    \
 346                 "sf probe && sf read $load_addr "       \
 347                 "$kernel_addr $kernel_size; env exists secureboot "     \
 348                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 349                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 350                 "bootm $load_addr#$board\0" \
 351         "nor_bootcmd=echo Trying load from nor..;"      \
 352                 "cp.b $kernel_addr $load_addr "         \
 353                 "$kernel_size; env exists secureboot "  \
 354                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 355                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 356                 "bootm $load_addr#$board\0"     \
 357         "sd_bootcmd=echo Trying load from SD ..;"       \
 358                 "mmcinfo && mmc read $load_addr "       \
 359                 "$kernel_addr_sd $kernel_size_sd && "   \
 360                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 361                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 362                 " && esbc_validate ${kernelheader_addr_r};"     \
 363                 "bootm $load_addr#$board\0"
 364 #endif
 365
 366 /*
 367  * Miscellaneous configurable options
 368  */
 369 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 370
 371 #define CONFIG_LS102XA_STREAM_ID
 372
 373 #define CONFIG_SYS_INIT_SP_OFFSET \
 374         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 375 #define CONFIG_SYS_INIT_SP_ADDR \
 376         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 377
 378 #ifdef CONFIG_SPL_BUILD
 379 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 380 #else
 381 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 382 #endif
 383
 384 /*
 385  * Environment
 386  */
 387
 388 #include <asm/fsl_secure_boot.h>
 389 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 390
 391 #endif