include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI_1_0
  13 #define CONFIG_ARMV7_PSCI_NR_CPUS       CONFIG_MAX_CPUS
  14
  15 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  16
  17 #define CONFIG_SYS_FSL_CLK
  18
  19 #define CONFIG_DISPLAY_CPUINFO
  20 #define CONFIG_DISPLAY_BOARDINFO
  21
  22 #define CONFIG_SKIP_LOWLEVEL_INIT
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_DEEP_SLEEP
  25 #ifdef CONFIG_DEEP_SLEEP
  26 #define CONFIG_SILENT_CONSOLE
  27 #endif
  28
  29 /*
  30  * Size of malloc() pool
  31  */
  32 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  33
  34 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  35 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  36
  37 /*
  38  * USB
  39  */
  40
  41 /*
  42  * EHCI Support - disbaled by default as
  43  * there is no signal coming out of soc on
  44  * this board for this controller. However,
  45  * the silicon still has this controller,
  46  * and anyone can use this controller by
  47  * taking signals out on their board.
  48  */
  49
  50 /*#define CONFIG_HAS_FSL_DR_USB*/
  51
  52 #ifdef CONFIG_HAS_FSL_DR_USB
  53 #define CONFIG_USB_EHCI
  54 #define CONFIG_USB_EHCI_FSL
  55 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  56 #endif
  57
  58 /* XHCI Support - enabled by default */
  59 #define CONFIG_HAS_FSL_XHCI_USB
  60
  61 #ifdef CONFIG_HAS_FSL_XHCI_USB
  62 #define CONFIG_USB_XHCI_FSL
  63 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  64 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  65 #endif
  66
  67 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  68 #define CONFIG_USB_STORAGE
  69 #endif
  70
  71 /*
  72  * Generic Timer Definitions
  73  */
  74 #define GENERIC_TIMER_CLK               12500000
  75
  76 #define CONFIG_SYS_CLK_FREQ             100000000
  77 #define CONFIG_DDR_CLK_FREQ             100000000
  78
  79 #define DDR_SDRAM_CFG                   0x470c0008
  80 #define DDR_CS0_BNDS                    0x008000bf
  81 #define DDR_CS0_CONFIG                  0x80014302
  82 #define DDR_TIMING_CFG_0                0x50550004
  83 #define DDR_TIMING_CFG_1                0xbcb38c56
  84 #define DDR_TIMING_CFG_2                0x0040d120
  85 #define DDR_TIMING_CFG_3                0x010e1000
  86 #define DDR_TIMING_CFG_4                0x00000001
  87 #define DDR_TIMING_CFG_5                0x03401400
  88 #define DDR_SDRAM_CFG_2                 0x00401010
  89 #define DDR_SDRAM_MODE                  0x00061c60
  90 #define DDR_SDRAM_MODE_2                0x00180000
  91 #define DDR_SDRAM_INTERVAL              0x18600618
  92 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  93 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  94 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  95 #define DDR_DDR_CDR1                    0x80040000
  96 #define DDR_DDR_CDR2                    0x00000001
  97 #define DDR_SDRAM_CLK_CNTL              0x02000000
  98 #define DDR_DDR_ZQ_CNTL                 0x89080600
  99 #define DDR_CS0_CONFIG_2                0
 100 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
 101 #define SDRAM_CFG2_D_INIT               0x00000010
 102 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
 103 #define SDRAM_CFG2_FRC_SR               0x80000000
 104 #define SDRAM_CFG_BI                    0x00000001
 105
 106 #ifdef CONFIG_RAMBOOT_PBL
 107 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
 108 #endif
 109
 110 #ifdef CONFIG_SD_BOOT
 111 #ifdef CONFIG_SD_BOOT_QSPI
 112 #define CONFIG_SYS_FSL_PBL_RCW  \
 113         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 114 #else
 115 #define CONFIG_SYS_FSL_PBL_RCW  \
 116         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 117 #endif
 118 #define CONFIG_SPL_FRAMEWORK
 119 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 120 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 121 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 122 #define CONFIG_SPL_ENV_SUPPORT
 123 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 124 #define CONFIG_SPL_I2C_SUPPORT
 125 #define CONFIG_SPL_WATCHDOG_SUPPORT
 126 #define CONFIG_SPL_SERIAL_SUPPORT
 127 #define CONFIG_SPL_MMC_SUPPORT
 128 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0xe8
 129
 130 #ifdef CONFIG_SECURE_BOOT
 131 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 132 /*
 133  * HDR would be appended at end of image and copied to DDR along
 134  * with U-Boot image.
 135  */
 136 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              (0x400 + \
 137                 (CONFIG_U_BOOT_HDR_SIZE / 512)
 138 #else
 139 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              0x400
 140 #endif /* ifdef CONFIG_SECURE_BOOT */
 141
 142 #define CONFIG_SPL_TEXT_BASE            0x10000000
 143 #define CONFIG_SPL_MAX_SIZE             0x1a000
 144 #define CONFIG_SPL_STACK                0x1001d000
 145 #define CONFIG_SPL_PAD_TO               0x1c000
 146 #define CONFIG_SYS_TEXT_BASE            0x82000000
 147
 148 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 149                 CONFIG_SYS_MONITOR_LEN)
 150 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 151 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 152 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 153
 154 #ifdef CONFIG_U_BOOT_HDR_SIZE
 155 /*
 156  * HDR would be appended at end of image and copied to DDR along
 157  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 158  * size increases then increase this size in case of secure boot as
 159  * it uses raw u-boot image instead of fit image.
 160  */
 161 #define CONFIG_SYS_MONITOR_LEN          (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
 162 #else
 163 #define CONFIG_SYS_MONITOR_LEN          0x80000
 164 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 165 #endif
 166
 167 #ifdef CONFIG_QSPI_BOOT
 168 #define CONFIG_SYS_TEXT_BASE            0x40010000
 169 #endif
 170
 171 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 172 #define CONFIG_SYS_NO_FLASH
 173 #endif
 174
 175 #ifndef CONFIG_SYS_TEXT_BASE
 176 #define CONFIG_SYS_TEXT_BASE            0x60100000
 177 #endif
 178
 179 #define CONFIG_NR_DRAM_BANKS            1
 180 #define PHYS_SDRAM                      0x80000000
 181 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 182
 183 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 184 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 185
 186 #define CONFIG_SYS_HAS_SERDES
 187
 188 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 189
 190 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 191         !defined(CONFIG_QSPI_BOOT)
 192 #define CONFIG_U_QE
 193 #endif
 194
 195 /*
 196  * IFC Definitions
 197  */
 198 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 199 #define CONFIG_FSL_IFC
 200 #define CONFIG_SYS_FLASH_BASE           0x60000000
 201 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 202
 203 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 204 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 205                                 CSPR_PORT_SIZE_16 | \
 206                                 CSPR_MSEL_NOR | \
 207                                 CSPR_V)
 208 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 209
 210 /* NOR Flash Timing Params */
 211 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 212                                         CSOR_NOR_TRHZ_80)
 213 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 214                                         FTIM0_NOR_TEADC(0x5) | \
 215                                         FTIM0_NOR_TAVDS(0x0) | \
 216                                         FTIM0_NOR_TEAHC(0x5))
 217 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 218                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 219                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 220 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 221                                         FTIM2_NOR_TCH(0x4) | \
 222                                         FTIM2_NOR_TWP(0x1c) | \
 223                                         FTIM2_NOR_TWPH(0x0e))
 224 #define CONFIG_SYS_NOR_FTIM3            0
 225
 226 #define CONFIG_FLASH_CFI_DRIVER
 227 #define CONFIG_SYS_FLASH_CFI
 228 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 229 #define CONFIG_SYS_FLASH_QUIET_TEST
 230 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 231
 232 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 233 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 234 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 235 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 236
 237 #define CONFIG_SYS_FLASH_EMPTY_INFO
 238 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 239
 240 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 241 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 242 #endif
 243
 244 /* CPLD */
 245
 246 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 247 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 248
 249 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 250 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 251                                         CSPR_PORT_SIZE_8 | \
 252                                         CSPR_MSEL_GPCM | \
 253                                         CSPR_V)
 254 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 255 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 256                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 257                                         CSOR_NOR_TRHZ_80)
 258
 259 /* CPLD Timing parameters for IFC GPCM */
 260 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 261                                         FTIM0_GPCM_TEADC(0xf) | \
 262                                         FTIM0_GPCM_TEAHC(0xf))
 263 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 264                                         FTIM1_GPCM_TRAD(0x3f))
 265 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 266                                         FTIM2_GPCM_TCH(0xf) | \
 267                                         FTIM2_GPCM_TWP(0xff))
 268 #define CONFIG_SYS_FPGA_FTIM3           0x0
 269 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 270 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 271 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 272 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 273 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 274 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 275 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 276 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 277 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 278 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 279 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 280 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 281 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 282 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 283 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 284 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 285
 286 /*
 287  * Serial Port
 288  */
 289 #ifdef CONFIG_LPUART
 290 #define CONFIG_LPUART_32B_REG
 291 #else
 292 #define CONFIG_CONS_INDEX               1
 293 #define CONFIG_SYS_NS16550_SERIAL
 294 #ifndef CONFIG_DM_SERIAL
 295 #define CONFIG_SYS_NS16550_REG_SIZE     1
 296 #endif
 297 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 298 #endif
 299
 300 #define CONFIG_BAUDRATE                 115200
 301
 302 /*
 303  * I2C
 304  */
 305 #define CONFIG_SYS_I2C
 306 #define CONFIG_SYS_I2C_MXC
 307 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 308 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 309 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 310
 311 /* EEPROM */
 312 #define CONFIG_ID_EEPROM
 313 #define CONFIG_SYS_I2C_EEPROM_NXID
 314 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 315 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 316 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 317 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 318 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 319
 320 /*
 321  * MMC
 322  */
 323 #define CONFIG_MMC
 324 #define CONFIG_FSL_ESDHC
 325 #define CONFIG_GENERIC_MMC
 326
 327 #define CONFIG_DOS_PARTITION
 328
 329 /* SPI */
 330 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 331 /* QSPI */
 332 #define QSPI0_AMBA_BASE                 0x40000000
 333 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 334 #define FSL_QSPI_FLASH_NUM              2
 335
 336 /* DSPI */
 337 #endif
 338
 339 /* DM SPI */
 340 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 341 #define CONFIG_DM_SPI_FLASH
 342 #endif
 343
 344 /*
 345  * Video
 346  */
 347 #define CONFIG_FSL_DCU_FB
 348
 349 #ifdef CONFIG_FSL_DCU_FB
 350 #define CONFIG_VIDEO
 351 #define CONFIG_CMD_BMP
 352 #define CONFIG_CFB_CONSOLE
 353 #define CONFIG_VGA_AS_SINGLE_DEVICE
 354 #define CONFIG_VIDEO_LOGO
 355 #define CONFIG_VIDEO_BMP_LOGO
 356 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 357
 358 #define CONFIG_FSL_DCU_SII9022A
 359 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 360 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 361 #endif
 362
 363 /*
 364  * eTSEC
 365  */
 366 #define CONFIG_TSEC_ENET
 367
 368 #ifdef CONFIG_TSEC_ENET
 369 #define CONFIG_MII
 370 #define CONFIG_MII_DEFAULT_TSEC         1
 371 #define CONFIG_TSEC1                    1
 372 #define CONFIG_TSEC1_NAME               "eTSEC1"
 373 #define CONFIG_TSEC2                    1
 374 #define CONFIG_TSEC2_NAME               "eTSEC2"
 375 #define CONFIG_TSEC3                    1
 376 #define CONFIG_TSEC3_NAME               "eTSEC3"
 377
 378 #define TSEC1_PHY_ADDR                  2
 379 #define TSEC2_PHY_ADDR                  0
 380 #define TSEC3_PHY_ADDR                  1
 381
 382 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 383 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 384 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 385
 386 #define TSEC1_PHYIDX                    0
 387 #define TSEC2_PHYIDX                    0
 388 #define TSEC3_PHYIDX                    0
 389
 390 #define CONFIG_ETHPRIME                 "eTSEC1"
 391
 392 #define CONFIG_PHY_GIGE
 393 #define CONFIG_PHYLIB
 394 #define CONFIG_PHY_ATHEROS
 395
 396 #define CONFIG_HAS_ETH0
 397 #define CONFIG_HAS_ETH1
 398 #define CONFIG_HAS_ETH2
 399 #endif
 400
 401 /* PCIe */
 402 #define CONFIG_PCI              /* Enable PCI/PCIE */
 403 #define CONFIG_PCIE1            /* PCIE controller 1 */
 404 #define CONFIG_PCIE2            /* PCIE controller 2 */
 405 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 406 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 407
 408 #define CONFIG_SYS_PCI_64BIT
 409
 410 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 411 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 412 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 413 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 414
 415 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 416 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 417 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 418
 419 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 420 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 421 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 422
 423 #ifdef CONFIG_PCI
 424 #define CONFIG_PCI_PNP
 425 #define CONFIG_PCI_SCAN_SHOW
 426 #define CONFIG_CMD_PCI
 427 #endif
 428
 429 #define CONFIG_CMDLINE_TAG
 430 #define CONFIG_CMDLINE_EDITING
 431
 432 #define CONFIG_ARMV7_NONSEC
 433 #define CONFIG_ARMV7_VIRT
 434 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 435 #define CONFIG_LAYERSCAPE_NS_ACCESS
 436 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 437 #define CONFIG_TIMER_CLK_FREQ           12500000
 438
 439 #define CONFIG_HWCONFIG
 440 #define HWCONFIG_BUFFER_SIZE            256
 441
 442 #define CONFIG_FSL_DEVICE_DISABLE
 443
 444
 445 #ifdef CONFIG_LPUART
 446 #define CONFIG_EXTRA_ENV_SETTINGS       \
 447         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 448         "initrd_high=0xffffffff\0"      \
 449         "fdt_high=0xffffffff\0"
 450 #else
 451 #define CONFIG_EXTRA_ENV_SETTINGS       \
 452         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 453         "initrd_high=0xffffffff\0"      \
 454         "fdt_high=0xffffffff\0"
 455 #endif
 456
 457 /*
 458  * Miscellaneous configurable options
 459  */
 460 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 461 #define CONFIG_AUTO_COMPLETE
 462 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 463 #define CONFIG_SYS_PBSIZE               \
 464                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 465 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 466 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 467
 468 #define CONFIG_SYS_MEMTEST_START        0x80000000
 469 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 470
 471 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 472
 473 #define CONFIG_LS102XA_STREAM_ID
 474
 475 /*
 476  * Stack sizes
 477  * The stack sizes are set up in start.S using the settings below
 478  */
 479 #define CONFIG_STACKSIZE                (30 * 1024)
 480
 481 #define CONFIG_SYS_INIT_SP_OFFSET \
 482         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 483 #define CONFIG_SYS_INIT_SP_ADDR \
 484         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 485
 486 #ifdef CONFIG_SPL_BUILD
 487 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 488 #else
 489 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 490 #endif
 491
 492 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 493
 494 /*
 495  * Environment
 496  */
 497 #define CONFIG_ENV_OVERWRITE
 498
 499 #if defined(CONFIG_SD_BOOT)
 500 #define CONFIG_ENV_OFFSET               0x100000
 501 #define CONFIG_ENV_IS_IN_MMC
 502 #define CONFIG_SYS_MMC_ENV_DEV          0
 503 #define CONFIG_ENV_SIZE                 0x20000
 504 #elif defined(CONFIG_QSPI_BOOT)
 505 #define CONFIG_ENV_IS_IN_SPI_FLASH
 506 #define CONFIG_ENV_SIZE                 0x2000
 507 #define CONFIG_ENV_OFFSET               0x100000
 508 #define CONFIG_ENV_SECT_SIZE            0x10000
 509 #else
 510 #define CONFIG_ENV_IS_IN_FLASH
 511 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 512 #define CONFIG_ENV_SIZE                 0x20000
 513 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 514 #endif
 515
 516 #define CONFIG_MISC_INIT_R
 517
 518 /* Hash command with SHA acceleration supported in hardware */
 519 #ifdef CONFIG_FSL_CAAM
 520 #define CONFIG_CMD_HASH
 521 #define CONFIG_SHA_HW_ACCEL
 522 #endif
 523
 524 #include <asm/fsl_secure_boot.h>
 525 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 526
 527 #endif