include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #define CONFIG_ARMV7_PSCI_1_0
  10
  11 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  12
  13 #define CONFIG_SYS_FSL_CLK
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT
  16 #define CONFIG_DEEP_SLEEP
  17
  18 /*
  19  * Size of malloc() pool
  20  */
  21 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  22
  23 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  24 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  25
  26 #define CONFIG_SYS_CLK_FREQ             100000000
  27 #define CONFIG_DDR_CLK_FREQ             100000000
  28
  29 #define DDR_SDRAM_CFG                   0x470c0008
  30 #define DDR_CS0_BNDS                    0x008000bf
  31 #define DDR_CS0_CONFIG                  0x80014302
  32 #define DDR_TIMING_CFG_0                0x50550004
  33 #define DDR_TIMING_CFG_1                0xbcb38c56
  34 #define DDR_TIMING_CFG_2                0x0040d120
  35 #define DDR_TIMING_CFG_3                0x010e1000
  36 #define DDR_TIMING_CFG_4                0x00000001
  37 #define DDR_TIMING_CFG_5                0x03401400
  38 #define DDR_SDRAM_CFG_2                 0x00401010
  39 #define DDR_SDRAM_MODE                  0x00061c60
  40 #define DDR_SDRAM_MODE_2                0x00180000
  41 #define DDR_SDRAM_INTERVAL              0x18600618
  42 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  43 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  44 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  45 #define DDR_DDR_CDR1                    0x80040000
  46 #define DDR_DDR_CDR2                    0x00000001
  47 #define DDR_SDRAM_CLK_CNTL              0x02000000
  48 #define DDR_DDR_ZQ_CNTL                 0x89080600
  49 #define DDR_CS0_CONFIG_2                0
  50 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  51 #define SDRAM_CFG2_D_INIT               0x00000010
  52 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  53 #define SDRAM_CFG2_FRC_SR               0x80000000
  54 #define SDRAM_CFG_BI                    0x00000001
  55
  56 #ifdef CONFIG_RAMBOOT_PBL
  57 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  58 #endif
  59
  60 #ifdef CONFIG_SD_BOOT
  61 #ifdef CONFIG_SD_BOOT_QSPI
  62 #define CONFIG_SYS_FSL_PBL_RCW  \
  63         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  64 #else
  65 #define CONFIG_SYS_FSL_PBL_RCW  \
  66         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
  67 #endif
  68
  69 #ifdef CONFIG_SECURE_BOOT
  70 /*
  71  * HDR would be appended at end of image and copied to DDR along
  72  * with U-Boot image.
  73  */
  74 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  75 #endif /* ifdef CONFIG_SECURE_BOOT */
  76
  77 #define CONFIG_SPL_TEXT_BASE            0x10000000
  78 #define CONFIG_SPL_MAX_SIZE             0x1a000
  79 #define CONFIG_SPL_STACK                0x1001d000
  80 #define CONFIG_SPL_PAD_TO               0x1c000
  81
  82 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  83                 CONFIG_SYS_MONITOR_LEN)
  84 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  85 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  86 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  87
  88 #ifdef CONFIG_U_BOOT_HDR_SIZE
  89 /*
  90  * HDR would be appended at end of image and copied to DDR along
  91  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  92  * size increases then increase this size in case of secure boot as
  93  * it uses raw u-boot image instead of fit image.
  94  */
  95 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  96 #else
  97 #define CONFIG_SYS_MONITOR_LEN          0x100000
  98 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  99 #endif
 100
 101 #define CONFIG_NR_DRAM_BANKS            1
 102 #define PHYS_SDRAM                      0x80000000
 103 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 104
 105 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 106 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 107
 108 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 109         !defined(CONFIG_QSPI_BOOT)
 110 #define CONFIG_U_QE
 111 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 112 #endif
 113
 114 /*
 115  * IFC Definitions
 116  */
 117 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 118 #define CONFIG_FSL_IFC
 119 #define CONFIG_SYS_FLASH_BASE           0x60000000
 120 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 121
 122 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 123 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 124                                 CSPR_PORT_SIZE_16 | \
 125                                 CSPR_MSEL_NOR | \
 126                                 CSPR_V)
 127 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 128
 129 /* NOR Flash Timing Params */
 130 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 131                                         CSOR_NOR_TRHZ_80)
 132 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 133                                         FTIM0_NOR_TEADC(0x5) | \
 134                                         FTIM0_NOR_TAVDS(0x0) | \
 135                                         FTIM0_NOR_TEAHC(0x5))
 136 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 137                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 138                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 139 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 140                                         FTIM2_NOR_TCH(0x4) | \
 141                                         FTIM2_NOR_TWP(0x1c) | \
 142                                         FTIM2_NOR_TWPH(0x0e))
 143 #define CONFIG_SYS_NOR_FTIM3            0
 144
 145 #define CONFIG_FLASH_CFI_DRIVER
 146 #define CONFIG_SYS_FLASH_CFI
 147 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 148 #define CONFIG_SYS_FLASH_QUIET_TEST
 149 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 150
 151 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 152 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 153 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 154 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 155
 156 #define CONFIG_SYS_FLASH_EMPTY_INFO
 157 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 158
 159 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 160 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 161 #endif
 162
 163 /* CPLD */
 164
 165 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 166 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 167
 168 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 169 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 170                                         CSPR_PORT_SIZE_8 | \
 171                                         CSPR_MSEL_GPCM | \
 172                                         CSPR_V)
 173 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 174 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 175                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 176                                         CSOR_NOR_TRHZ_80)
 177
 178 /* CPLD Timing parameters for IFC GPCM */
 179 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 180                                         FTIM0_GPCM_TEADC(0xf) | \
 181                                         FTIM0_GPCM_TEAHC(0xf))
 182 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 183                                         FTIM1_GPCM_TRAD(0x3f))
 184 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 185                                         FTIM2_GPCM_TCH(0xf) | \
 186                                         FTIM2_GPCM_TWP(0xff))
 187 #define CONFIG_SYS_FPGA_FTIM3           0x0
 188 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 189 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 190 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 191 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 192 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 193 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 194 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 195 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 196 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 197 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 198 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 199 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 200 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 201 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 202 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 203 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 204
 205 /*
 206  * Serial Port
 207  */
 208 #ifdef CONFIG_LPUART
 209 #define CONFIG_LPUART_32B_REG
 210 #else
 211 #define CONFIG_SYS_NS16550_SERIAL
 212 #ifndef CONFIG_DM_SERIAL
 213 #define CONFIG_SYS_NS16550_REG_SIZE     1
 214 #endif
 215 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 216 #endif
 217
 218 /*
 219  * I2C
 220  */
 221 #define CONFIG_SYS_I2C
 222 #define CONFIG_SYS_I2C_MXC
 223 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 224 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 225 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 226
 227 /* EEPROM */
 228 #define CONFIG_ID_EEPROM
 229 #define CONFIG_SYS_I2C_EEPROM_NXID
 230 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 231 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 232 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 233 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 235
 236 /*
 237  * MMC
 238  */
 239
 240 /* SPI */
 241 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 242 /* QSPI */
 243 #define QSPI0_AMBA_BASE                 0x40000000
 244 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 245 #define FSL_QSPI_FLASH_NUM              2
 246
 247 /* DSPI */
 248 #endif
 249
 250 /* DM SPI */
 251 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 252 #define CONFIG_DM_SPI_FLASH
 253 #endif
 254
 255 /*
 256  * Video
 257  */
 258 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 259 #define CONFIG_VIDEO_LOGO
 260 #define CONFIG_VIDEO_BMP_LOGO
 261
 262 #define CONFIG_FSL_DCU_SII9022A
 263 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 264 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 265 #endif
 266
 267 /*
 268  * eTSEC
 269  */
 270
 271 #ifdef CONFIG_TSEC_ENET
 272 #define CONFIG_MII
 273 #define CONFIG_MII_DEFAULT_TSEC         1
 274 #define CONFIG_TSEC1                    1
 275 #define CONFIG_TSEC1_NAME               "eTSEC1"
 276 #define CONFIG_TSEC2                    1
 277 #define CONFIG_TSEC2_NAME               "eTSEC2"
 278 #define CONFIG_TSEC3                    1
 279 #define CONFIG_TSEC3_NAME               "eTSEC3"
 280
 281 #define TSEC1_PHY_ADDR                  2
 282 #define TSEC2_PHY_ADDR                  0
 283 #define TSEC3_PHY_ADDR                  1
 284
 285 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 286 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 287 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 288
 289 #define TSEC1_PHYIDX                    0
 290 #define TSEC2_PHYIDX                    0
 291 #define TSEC3_PHYIDX                    0
 292
 293 #define CONFIG_ETHPRIME                 "eTSEC1"
 294
 295 #define CONFIG_PHY_ATHEROS
 296
 297 #define CONFIG_HAS_ETH0
 298 #define CONFIG_HAS_ETH1
 299 #define CONFIG_HAS_ETH2
 300 #endif
 301
 302 /* PCIe */
 303 #define CONFIG_PCIE1            /* PCIE controller 1 */
 304 #define CONFIG_PCIE2            /* PCIE controller 2 */
 305
 306 #ifdef CONFIG_PCI
 307 #define CONFIG_PCI_SCAN_SHOW
 308 #endif
 309
 310 #define CONFIG_CMDLINE_TAG
 311
 312 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 313 #define CONFIG_LAYERSCAPE_NS_ACCESS
 314 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 315 #define COUNTER_FREQUENCY               12500000
 316
 317 #define CONFIG_HWCONFIG
 318 #define HWCONFIG_BUFFER_SIZE            256
 319
 320 #define CONFIG_FSL_DEVICE_DISABLE
 321
 322 #define BOOT_TARGET_DEVICES(func) \
 323         func(MMC, mmc, 0) \
 324         func(USB, usb, 0)
 325 #include <config_distro_bootcmd.h>
 326
 327 #ifdef CONFIG_LPUART
 328 #define CONFIG_EXTRA_ENV_SETTINGS       \
 329         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 330         "initrd_high=0xffffffff\0"      \
 331         "fdt_high=0xffffffff\0"         \
 332         "fdt_addr=0x64f00000\0"         \
 333         "kernel_addr=0x65000000\0"      \
 334         "scriptaddr=0x80000000\0"       \
 335         "scripthdraddr=0x80080000\0"    \
 336         "fdtheader_addr_r=0x80100000\0" \
 337         "kernelheader_addr_r=0x80200000\0"      \
 338         "kernel_addr_r=0x81000000\0"    \
 339         "fdt_addr_r=0x90000000\0"       \
 340         "ramdisk_addr_r=0xa0000000\0"   \
 341         "load_addr=0xa0000000\0"        \
 342         "kernel_size=0x2800000\0"       \
 343         "kernel_addr_sd=0x8000\0"       \
 344         "kernel_size_sd=0x14000\0"      \
 345         BOOTENV                         \
 346         "boot_scripts=ls1021atwr_boot.scr\0"    \
 347         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 348                 "scan_dev_for_boot_part="       \
 349                         "part list ${devtype} ${devnum} devplist; "     \
 350                         "env exists devplist || setenv devplist 1; "    \
 351                         "for distro_bootpart in ${devplist}; do "       \
 352                         "if fstype ${devtype} "                         \
 353                                 "${devnum}:${distro_bootpart} "         \
 354                                 "bootfstype; then "                     \
 355                                 "run scan_dev_for_boot; "               \
 356                         "fi; "                  \
 357                 "done\0"                        \
 358         "scan_dev_for_boot="                              \
 359                 "echo Scanning ${devtype} "               \
 360                                 "${devnum}:${distro_bootpart}...; "  \
 361                 "for prefix in ${boot_prefixes}; do "     \
 362                         "run scan_dev_for_scripts; "      \
 363                 "done;"                                   \
 364                 "\0"                                      \
 365         "boot_a_script="                                  \
 366                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 367                         "${scriptaddr} ${prefix}${script}; "    \
 368                 "env exists secureboot && load ${devtype} "     \
 369                         "${devnum}:${distro_bootpart} "         \
 370                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 371                         "&& esbc_validate ${scripthdraddr};"    \
 372                 "source ${scriptaddr}\0"          \
 373         "installer=load mmc 0:2 $load_addr "    \
 374                 "/flex_installer_arm32.itb; "           \
 375                 "bootm $load_addr#ls1021atwr\0" \
 376         "qspi_bootcmd=echo Trying load from qspi..;"    \
 377                 "sf probe && sf read $load_addr "       \
 378                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 379         "nor_bootcmd=echo Trying load from nor..;"      \
 380                 "cp.b $kernel_addr $load_addr "         \
 381                 "$kernel_size && bootm $load_addr#$board\0"
 382 #else
 383 #define CONFIG_EXTRA_ENV_SETTINGS       \
 384         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 385         "initrd_high=0xffffffff\0"      \
 386         "fdt_high=0xffffffff\0"         \
 387         "fdt_addr=0x64f00000\0"         \
 388         "kernel_addr=0x61000000\0"      \
 389         "kernelheader_addr=0x60800000\0"        \
 390         "scriptaddr=0x80000000\0"       \
 391         "scripthdraddr=0x80080000\0"    \
 392         "fdtheader_addr_r=0x80100000\0" \
 393         "kernelheader_addr_r=0x80200000\0"      \
 394         "kernel_addr_r=0x81000000\0"    \
 395         "kernelheader_size=0x40000\0"   \
 396         "fdt_addr_r=0x90000000\0"       \
 397         "ramdisk_addr_r=0xa0000000\0"   \
 398         "load_addr=0xa0000000\0"        \
 399         "kernel_size=0x2800000\0"       \
 400         "kernel_addr_sd=0x8000\0"       \
 401         "kernel_size_sd=0x14000\0"      \
 402         "kernelhdr_addr_sd=0x4000\0"            \
 403         "kernelhdr_size_sd=0x10\0"              \
 404         BOOTENV                         \
 405         "boot_scripts=ls1021atwr_boot.scr\0"    \
 406         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 407                 "scan_dev_for_boot_part="       \
 408                         "part list ${devtype} ${devnum} devplist; "     \
 409                         "env exists devplist || setenv devplist 1; "    \
 410                         "for distro_bootpart in ${devplist}; do "       \
 411                         "if fstype ${devtype} "                         \
 412                                 "${devnum}:${distro_bootpart} "         \
 413                                 "bootfstype; then "                     \
 414                                 "run scan_dev_for_boot; "               \
 415                         "fi; "                  \
 416                 "done\0"                        \
 417         "scan_dev_for_boot="                              \
 418                 "echo Scanning ${devtype} "               \
 419                                 "${devnum}:${distro_bootpart}...; "  \
 420                 "for prefix in ${boot_prefixes}; do "     \
 421                         "run scan_dev_for_scripts; "      \
 422                 "done;"                                   \
 423                 "\0"                                      \
 424         "boot_a_script="                                  \
 425                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 426                         "${scriptaddr} ${prefix}${script}; "    \
 427                 "env exists secureboot && load ${devtype} "     \
 428                         "${devnum}:${distro_bootpart} "         \
 429                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 430                         "&& esbc_validate ${scripthdraddr};"    \
 431                 "source ${scriptaddr}\0"          \
 432         "qspi_bootcmd=echo Trying load from qspi..;"    \
 433                 "sf probe && sf read $load_addr "       \
 434                 "$kernel_addr $kernel_size; env exists secureboot "     \
 435                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 436                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 437                 "bootm $load_addr#$board\0" \
 438         "nor_bootcmd=echo Trying load from nor..;"      \
 439                 "cp.b $kernel_addr $load_addr "         \
 440                 "$kernel_size; env exists secureboot "  \
 441                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 442                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 443                 "bootm $load_addr#$board\0"     \
 444         "sd_bootcmd=echo Trying load from SD ..;"       \
 445                 "mmcinfo && mmc read $load_addr "       \
 446                 "$kernel_addr_sd $kernel_size_sd && "   \
 447                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 448                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 449                 " && esbc_validate ${kernelheader_addr_r};"     \
 450                 "bootm $load_addr#$board\0"
 451 #endif
 452
 453 #undef CONFIG_BOOTCOMMAND
 454 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 455 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd"       \
 456                            "env exists secureboot && esbc_halt"
 457 #elif defined(CONFIG_SD_BOOT)
 458 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 459                            "env exists secureboot && esbc_halt;"
 460 #else
 461 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 462                            "env exists secureboot && esbc_halt;"
 463 #endif
 464
 465 /*
 466  * Miscellaneous configurable options
 467  */
 468
 469 #define CONFIG_SYS_MEMTEST_START        0x80000000
 470 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 471
 472 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 473
 474 #define CONFIG_LS102XA_STREAM_ID
 475
 476 #define CONFIG_SYS_INIT_SP_OFFSET \
 477         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 478 #define CONFIG_SYS_INIT_SP_ADDR \
 479         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 480
 481 #ifdef CONFIG_SPL_BUILD
 482 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 483 #else
 484 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 485 #endif
 486
 487 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 488
 489 /*
 490  * Environment
 491  */
 492 #define CONFIG_ENV_OVERWRITE
 493
 494 #if defined(CONFIG_SD_BOOT)
 495 #define CONFIG_ENV_OFFSET               0x300000
 496 #define CONFIG_SYS_MMC_ENV_DEV          0
 497 #define CONFIG_ENV_SIZE                 0x20000
 498 #elif defined(CONFIG_QSPI_BOOT)
 499 #define CONFIG_ENV_SIZE                 0x2000
 500 #define CONFIG_ENV_OFFSET               0x300000
 501 #define CONFIG_ENV_SECT_SIZE            0x10000
 502 #else
 503 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
 504 #define CONFIG_ENV_SIZE                 0x20000
 505 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 506 #endif
 507
 508 #define CONFIG_MISC_INIT_R
 509
 510 #include <asm/fsl_secure_boot.h>
 511 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 512
 513 #endif