include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_SYS_FSL_CLK
  13
  14 #define CONFIG_DEEP_SLEEP
  15
  16 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  17 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  18
  19 #define CONFIG_SYS_CLK_FREQ             100000000
  20
  21 #define DDR_SDRAM_CFG                   0x470c0008
  22 #define DDR_CS0_BNDS                    0x008000bf
  23 #define DDR_CS0_CONFIG                  0x80014302
  24 #define DDR_TIMING_CFG_0                0x50550004
  25 #define DDR_TIMING_CFG_1                0xbcb38c56
  26 #define DDR_TIMING_CFG_2                0x0040d120
  27 #define DDR_TIMING_CFG_3                0x010e1000
  28 #define DDR_TIMING_CFG_4                0x00000001
  29 #define DDR_TIMING_CFG_5                0x03401400
  30 #define DDR_SDRAM_CFG_2                 0x00401010
  31 #define DDR_SDRAM_MODE                  0x00061c60
  32 #define DDR_SDRAM_MODE_2                0x00180000
  33 #define DDR_SDRAM_INTERVAL              0x18600618
  34 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  35 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  36 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  37 #define DDR_DDR_CDR1                    0x80040000
  38 #define DDR_DDR_CDR2                    0x00000001
  39 #define DDR_SDRAM_CLK_CNTL              0x02000000
  40 #define DDR_DDR_ZQ_CNTL                 0x89080600
  41 #define DDR_CS0_CONFIG_2                0
  42 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  43 #define SDRAM_CFG2_D_INIT               0x00000010
  44 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  45 #define SDRAM_CFG2_FRC_SR               0x80000000
  46 #define SDRAM_CFG_BI                    0x00000001
  47
  48 #ifdef CONFIG_SD_BOOT
  49 #ifdef CONFIG_NXP_ESBC
  50 /*
  51  * HDR would be appended at end of image and copied to DDR along
  52  * with U-Boot image.
  53  */
  54 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  55 #endif /* ifdef CONFIG_NXP_ESBC */
  56
  57 #define CONFIG_SPL_MAX_SIZE             0x1a000
  58 #define CONFIG_SPL_STACK                0x1001d000
  59 #define CONFIG_SPL_PAD_TO               0x1c000
  60
  61 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  62                 CONFIG_SYS_MONITOR_LEN)
  63 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  64 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  65 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  66
  67 #ifdef CONFIG_U_BOOT_HDR_SIZE
  68 /*
  69  * HDR would be appended at end of image and copied to DDR along
  70  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  71  * size increases then increase this size in case of secure boot as
  72  * it uses raw u-boot image instead of fit image.
  73  */
  74 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  75 #else
  76 #define CONFIG_SYS_MONITOR_LEN          0x100000
  77 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  78 #endif
  79
  80 #define PHYS_SDRAM                      0x80000000
  81 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  82
  83 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
  84 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
  85
  86 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  87
  88 /*
  89  * IFC Definitions
  90  */
  91 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  92 #define CONFIG_FSL_IFC
  93 #define CONFIG_SYS_FLASH_BASE           0x60000000
  94 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
  95
  96 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  97 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
  98                                 CSPR_PORT_SIZE_16 | \
  99                                 CSPR_MSEL_NOR | \
 100                                 CSPR_V)
 101 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 102
 103 /* NOR Flash Timing Params */
 104 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 105                                         CSOR_NOR_TRHZ_80)
 106 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 107                                         FTIM0_NOR_TEADC(0x5) | \
 108                                         FTIM0_NOR_TAVDS(0x0) | \
 109                                         FTIM0_NOR_TEAHC(0x5))
 110 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 111                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 112                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 113 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 114                                         FTIM2_NOR_TCH(0x4) | \
 115                                         FTIM2_NOR_TWP(0x1c) | \
 116                                         FTIM2_NOR_TWPH(0x0e))
 117 #define CONFIG_SYS_NOR_FTIM3            0
 118
 119 #define CONFIG_SYS_FLASH_QUIET_TEST
 120 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 121
 122 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 123 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 124 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 125 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 126
 127 #define CONFIG_SYS_FLASH_EMPTY_INFO
 128 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 129
 130 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 131 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 132 #endif
 133
 134 /* CPLD */
 135
 136 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 137 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 138
 139 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 140 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 141                                         CSPR_PORT_SIZE_8 | \
 142                                         CSPR_MSEL_GPCM | \
 143                                         CSPR_V)
 144 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 145 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 146                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 147                                         CSOR_NOR_TRHZ_80)
 148
 149 /* CPLD Timing parameters for IFC GPCM */
 150 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 151                                         FTIM0_GPCM_TEADC(0xf) | \
 152                                         FTIM0_GPCM_TEAHC(0xf))
 153 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 154                                         FTIM1_GPCM_TRAD(0x3f))
 155 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 156                                         FTIM2_GPCM_TCH(0xf) | \
 157                                         FTIM2_GPCM_TWP(0xff))
 158 #define CONFIG_SYS_FPGA_FTIM3           0x0
 159 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 160 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 161 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 162 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 163 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 164 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 165 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 166 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 167 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 168 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 169 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 170 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 171 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 172 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 173 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 174 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 175
 176 /*
 177  * Serial Port
 178  */
 179 #ifdef CONFIG_LPUART
 180 #define CONFIG_LPUART_32B_REG
 181 #else
 182 #define CONFIG_SYS_NS16550_SERIAL
 183 #ifndef CONFIG_DM_SERIAL
 184 #define CONFIG_SYS_NS16550_REG_SIZE     1
 185 #endif
 186 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 187 #endif
 188
 189 /*
 190  * I2C
 191  */
 192
 193 /* GPIO */
 194 #ifdef CONFIG_DM_GPIO
 195 #ifndef CONFIG_MPC8XXX_GPIO
 196 #define CONFIG_MPC8XXX_GPIO
 197 #endif
 198 #endif
 199
 200 /* EEPROM */
 201 #define CONFIG_SYS_I2C_EEPROM_NXID
 202 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 203
 204 /*
 205  * MMC
 206  */
 207
 208 /*
 209  * Video
 210  */
 211 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 212 #define CONFIG_VIDEO_LOGO
 213 #define CONFIG_VIDEO_BMP_LOGO
 214
 215 #define CONFIG_FSL_DCU_SII9022A
 216 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 217 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 218 #endif
 219
 220 /*
 221  * eTSEC
 222  */
 223
 224 #ifdef CONFIG_TSEC_ENET
 225 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 226 #endif
 227
 228 /* PCIe */
 229 #define CONFIG_PCIE1            /* PCIE controller 1 */
 230 #define CONFIG_PCIE2            /* PCIE controller 2 */
 231
 232 #ifdef CONFIG_PCI
 233 #define CONFIG_PCI_SCAN_SHOW
 234 #endif
 235
 236 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 237 #define CONFIG_LAYERSCAPE_NS_ACCESS
 238 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 239 #define COUNTER_FREQUENCY               12500000
 240
 241 #define CONFIG_HWCONFIG
 242 #define HWCONFIG_BUFFER_SIZE            256
 243
 244 #define CONFIG_FSL_DEVICE_DISABLE
 245
 246 #define BOOT_TARGET_DEVICES(func) \
 247         func(MMC, mmc, 0) \
 248         func(USB, usb, 0) \
 249         func(DHCP, dhcp, na)
 250 #include <config_distro_bootcmd.h>
 251
 252 #ifdef CONFIG_LPUART
 253 #define CONFIG_EXTRA_ENV_SETTINGS       \
 254         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 255                 "cma=64M@0x0-0xb0000000\0" \
 256         "initrd_high=0xffffffff\0"      \
 257         "fdt_addr=0x64f00000\0"         \
 258         "kernel_addr=0x65000000\0"      \
 259         "scriptaddr=0x80000000\0"       \
 260         "scripthdraddr=0x80080000\0"    \
 261         "fdtheader_addr_r=0x80100000\0" \
 262         "kernelheader_addr_r=0x80200000\0"      \
 263         "kernel_addr_r=0x81000000\0"    \
 264         "fdt_addr_r=0x90000000\0"       \
 265         "ramdisk_addr_r=0xa0000000\0"   \
 266         "load_addr=0xa0000000\0"        \
 267         "kernel_size=0x2800000\0"       \
 268         "kernel_addr_sd=0x8000\0"       \
 269         "kernel_size_sd=0x14000\0"      \
 270         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 271         BOOTENV                         \
 272         "boot_scripts=ls1021atwr_boot.scr\0"    \
 273         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 274                 "scan_dev_for_boot_part="       \
 275                         "part list ${devtype} ${devnum} devplist; "     \
 276                         "env exists devplist || setenv devplist 1; "    \
 277                         "for distro_bootpart in ${devplist}; do "       \
 278                         "if fstype ${devtype} "                         \
 279                                 "${devnum}:${distro_bootpart} "         \
 280                                 "bootfstype; then "                     \
 281                                 "run scan_dev_for_boot; "               \
 282                         "fi; "                  \
 283                 "done\0"                        \
 284         "scan_dev_for_boot="                              \
 285                 "echo Scanning ${devtype} "               \
 286                                 "${devnum}:${distro_bootpart}...; "  \
 287                 "for prefix in ${boot_prefixes}; do "     \
 288                         "run scan_dev_for_scripts; "      \
 289                 "done;"                                   \
 290                 "\0"                                      \
 291         "boot_a_script="                                  \
 292                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 293                         "${scriptaddr} ${prefix}${script}; "    \
 294                 "env exists secureboot && load ${devtype} "     \
 295                         "${devnum}:${distro_bootpart} "         \
 296                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 297                         "env exists secureboot "        \
 298                         "&& esbc_validate ${scripthdraddr};"    \
 299                 "source ${scriptaddr}\0"          \
 300         "installer=load mmc 0:2 $load_addr "    \
 301                 "/flex_installer_arm32.itb; "           \
 302                 "bootm $load_addr#ls1021atwr\0" \
 303         "qspi_bootcmd=echo Trying load from qspi..;"    \
 304                 "sf probe && sf read $load_addr "       \
 305                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 306         "nor_bootcmd=echo Trying load from nor..;"      \
 307                 "cp.b $kernel_addr $load_addr "         \
 308                 "$kernel_size && bootm $load_addr#$board\0"
 309 #else
 310 #define CONFIG_EXTRA_ENV_SETTINGS       \
 311         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 312                 "cma=64M@0x0-0xb0000000\0" \
 313         "initrd_high=0xffffffff\0"      \
 314         "fdt_addr=0x64f00000\0"         \
 315         "kernel_addr=0x61000000\0"      \
 316         "kernelheader_addr=0x60800000\0"        \
 317         "scriptaddr=0x80000000\0"       \
 318         "scripthdraddr=0x80080000\0"    \
 319         "fdtheader_addr_r=0x80100000\0" \
 320         "kernelheader_addr_r=0x80200000\0"      \
 321         "kernel_addr_r=0x81000000\0"    \
 322         "kernelheader_size=0x40000\0"   \
 323         "fdt_addr_r=0x90000000\0"       \
 324         "ramdisk_addr_r=0xa0000000\0"   \
 325         "load_addr=0xa0000000\0"        \
 326         "kernel_size=0x2800000\0"       \
 327         "kernel_addr_sd=0x8000\0"       \
 328         "kernel_size_sd=0x14000\0"      \
 329         "kernelhdr_addr_sd=0x4000\0"            \
 330         "kernelhdr_size_sd=0x10\0"              \
 331         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 332         BOOTENV                         \
 333         "boot_scripts=ls1021atwr_boot.scr\0"    \
 334         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 335                 "scan_dev_for_boot_part="       \
 336                         "part list ${devtype} ${devnum} devplist; "     \
 337                         "env exists devplist || setenv devplist 1; "    \
 338                         "for distro_bootpart in ${devplist}; do "       \
 339                         "if fstype ${devtype} "                         \
 340                                 "${devnum}:${distro_bootpart} "         \
 341                                 "bootfstype; then "                     \
 342                                 "run scan_dev_for_boot; "               \
 343                         "fi; "                  \
 344                 "done\0"                        \
 345         "scan_dev_for_boot="                              \
 346                 "echo Scanning ${devtype} "               \
 347                                 "${devnum}:${distro_bootpart}...; "  \
 348                 "for prefix in ${boot_prefixes}; do "     \
 349                         "run scan_dev_for_scripts; "      \
 350                 "done;"                                   \
 351                 "\0"                                      \
 352         "boot_a_script="                                  \
 353                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 354                         "${scriptaddr} ${prefix}${script}; "    \
 355                 "env exists secureboot && load ${devtype} "     \
 356                         "${devnum}:${distro_bootpart} "         \
 357                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 358                         "&& esbc_validate ${scripthdraddr};"    \
 359                 "source ${scriptaddr}\0"          \
 360         "qspi_bootcmd=echo Trying load from qspi..;"    \
 361                 "sf probe && sf read $load_addr "       \
 362                 "$kernel_addr $kernel_size; env exists secureboot "     \
 363                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 364                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 365                 "bootm $load_addr#$board\0" \
 366         "nor_bootcmd=echo Trying load from nor..;"      \
 367                 "cp.b $kernel_addr $load_addr "         \
 368                 "$kernel_size; env exists secureboot "  \
 369                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 370                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 371                 "bootm $load_addr#$board\0"     \
 372         "sd_bootcmd=echo Trying load from SD ..;"       \
 373                 "mmcinfo && mmc read $load_addr "       \
 374                 "$kernel_addr_sd $kernel_size_sd && "   \
 375                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 376                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 377                 " && esbc_validate ${kernelheader_addr_r};"     \
 378                 "bootm $load_addr#$board\0"
 379 #endif
 380
 381 #undef CONFIG_BOOTCOMMAND
 382 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 383 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 384                            "env exists secureboot && esbc_halt"
 385 #elif defined(CONFIG_SD_BOOT)
 386 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 387                            "env exists secureboot && esbc_halt;"
 388 #else
 389 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 390                            "env exists secureboot && esbc_halt;"
 391 #endif
 392
 393 /*
 394  * Miscellaneous configurable options
 395  */
 396 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 397
 398 #define CONFIG_LS102XA_STREAM_ID
 399
 400 #define CONFIG_SYS_INIT_SP_OFFSET \
 401         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 402 #define CONFIG_SYS_INIT_SP_ADDR \
 403         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 404
 405 #ifdef CONFIG_SPL_BUILD
 406 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 407 #else
 408 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 409 #endif
 410
 411 /*
 412  * Environment
 413  */
 414
 415 #include <asm/fsl_secure_boot.h>
 416 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 417
 418 #endif