include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_DEEP_SLEEP
  22 #ifdef CONFIG_DEEP_SLEEP
  23 #define CONFIG_SILENT_CONSOLE
  24 #endif
  25
  26 /*
  27  * Size of malloc() pool
  28  */
  29 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  30
  31 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  32 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  33
  34 /*
  35  * USB
  36  */
  37
  38 /*
  39  * EHCI Support - disbaled by default as
  40  * there is no signal coming out of soc on
  41  * this board for this controller. However,
  42  * the silicon still has this controller,
  43  * and anyone can use this controller by
  44  * taking signals out on their board.
  45  */
  46
  47 /*#define CONFIG_HAS_FSL_DR_USB*/
  48
  49 #ifdef CONFIG_HAS_FSL_DR_USB
  50 #define CONFIG_USB_EHCI
  51 #define CONFIG_USB_EHCI_FSL
  52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  53 #endif
  54
  55 /* XHCI Support - enabled by default */
  56 #define CONFIG_HAS_FSL_XHCI_USB
  57
  58 #ifdef CONFIG_HAS_FSL_XHCI_USB
  59 #define CONFIG_USB_XHCI_FSL
  60 #define CONFIG_USB_XHCI_DWC3
  61 #define CONFIG_USB_XHCI
  62 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  63 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  64 #endif
  65
  66 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
  67 #define CONFIG_CMD_USB
  68 #define CONFIG_USB_STORAGE
  69 #define CONFIG_CMD_EXT2
  70 #endif
  71
  72 /*
  73  * Generic Timer Definitions
  74  */
  75 #define GENERIC_TIMER_CLK               12500000
  76
  77 #define CONFIG_SYS_CLK_FREQ             100000000
  78 #define CONFIG_DDR_CLK_FREQ             100000000
  79
  80 #define DDR_SDRAM_CFG                   0x470c0008
  81 #define DDR_CS0_BNDS                    0x008000bf
  82 #define DDR_CS0_CONFIG                  0x80014302
  83 #define DDR_TIMING_CFG_0                0x50550004
  84 #define DDR_TIMING_CFG_1                0xbcb38c56
  85 #define DDR_TIMING_CFG_2                0x0040d120
  86 #define DDR_TIMING_CFG_3                0x010e1000
  87 #define DDR_TIMING_CFG_4                0x00000001
  88 #define DDR_TIMING_CFG_5                0x03401400
  89 #define DDR_SDRAM_CFG_2                 0x00401010
  90 #define DDR_SDRAM_MODE                  0x00061c60
  91 #define DDR_SDRAM_MODE_2                0x00180000
  92 #define DDR_SDRAM_INTERVAL              0x18600618
  93 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  94 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  95 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  96 #define DDR_DDR_CDR1                    0x80040000
  97 #define DDR_DDR_CDR2                    0x00000001
  98 #define DDR_SDRAM_CLK_CNTL              0x02000000
  99 #define DDR_DDR_ZQ_CNTL                 0x89080600
 100 #define DDR_CS0_CONFIG_2                0
 101 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
 102 #define SDRAM_CFG2_D_INIT               0x00000010
 103 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
 104 #define SDRAM_CFG2_FRC_SR               0x80000000
 105 #define SDRAM_CFG_BI                    0x00000001
 106
 107 #ifdef CONFIG_RAMBOOT_PBL
 108 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
 109 #endif
 110
 111 #ifdef CONFIG_SD_BOOT
 112 #ifdef CONFIG_SD_BOOT_QSPI
 113 #define CONFIG_SYS_FSL_PBL_RCW  \
 114         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 115 #else
 116 #define CONFIG_SYS_FSL_PBL_RCW  \
 117         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 118 #endif
 119 #define CONFIG_SPL_FRAMEWORK
 120 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 121 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 122 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 123 #define CONFIG_SPL_ENV_SUPPORT
 124 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 125 #define CONFIG_SPL_I2C_SUPPORT
 126 #define CONFIG_SPL_WATCHDOG_SUPPORT
 127 #define CONFIG_SPL_SERIAL_SUPPORT
 128 #define CONFIG_SPL_MMC_SUPPORT
 129 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR         0xe8
 130 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS              0x400
 131
 132 #define CONFIG_SPL_TEXT_BASE            0x10000000
 133 #define CONFIG_SPL_MAX_SIZE             0x1a000
 134 #define CONFIG_SPL_STACK                0x1001d000
 135 #define CONFIG_SPL_PAD_TO               0x1c000
 136 #define CONFIG_SYS_TEXT_BASE            0x82000000
 137
 138 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 139                 CONFIG_SYS_MONITOR_LEN)
 140 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 141 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 142 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 143 #define CONFIG_SYS_MONITOR_LEN          0x80000
 144 #endif
 145
 146 #ifdef CONFIG_QSPI_BOOT
 147 #define CONFIG_SYS_TEXT_BASE            0x40010000
 148 #endif
 149
 150 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 151 #define CONFIG_SYS_NO_FLASH
 152 #endif
 153
 154 #ifndef CONFIG_SYS_TEXT_BASE
 155 #define CONFIG_SYS_TEXT_BASE            0x60100000
 156 #endif
 157
 158 #define CONFIG_NR_DRAM_BANKS            1
 159 #define PHYS_SDRAM                      0x80000000
 160 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 161
 162 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 163 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 164
 165 #define CONFIG_SYS_HAS_SERDES
 166
 167 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 168
 169 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 170         !defined(CONFIG_QSPI_BOOT)
 171 #define CONFIG_U_QE
 172 #endif
 173
 174 /*
 175  * IFC Definitions
 176  */
 177 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 178 #define CONFIG_FSL_IFC
 179 #define CONFIG_SYS_FLASH_BASE           0x60000000
 180 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 181
 182 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 183 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 184                                 CSPR_PORT_SIZE_16 | \
 185                                 CSPR_MSEL_NOR | \
 186                                 CSPR_V)
 187 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 188
 189 /* NOR Flash Timing Params */
 190 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 191                                         CSOR_NOR_TRHZ_80)
 192 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 193                                         FTIM0_NOR_TEADC(0x5) | \
 194                                         FTIM0_NOR_TAVDS(0x0) | \
 195                                         FTIM0_NOR_TEAHC(0x5))
 196 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 197                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 198                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 199 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 200                                         FTIM2_NOR_TCH(0x4) | \
 201                                         FTIM2_NOR_TWP(0x1c) | \
 202                                         FTIM2_NOR_TWPH(0x0e))
 203 #define CONFIG_SYS_NOR_FTIM3            0
 204
 205 #define CONFIG_FLASH_CFI_DRIVER
 206 #define CONFIG_SYS_FLASH_CFI
 207 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 208 #define CONFIG_SYS_FLASH_QUIET_TEST
 209 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 210
 211 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 212 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 213 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 214 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 215
 216 #define CONFIG_SYS_FLASH_EMPTY_INFO
 217 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 218
 219 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 220 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 221 #endif
 222
 223 /* CPLD */
 224
 225 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 226 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 227
 228 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 229 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 230                                         CSPR_PORT_SIZE_8 | \
 231                                         CSPR_MSEL_GPCM | \
 232                                         CSPR_V)
 233 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 234 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 235                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 236                                         CSOR_NOR_TRHZ_80)
 237
 238 /* CPLD Timing parameters for IFC GPCM */
 239 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 240                                         FTIM0_GPCM_TEADC(0xf) | \
 241                                         FTIM0_GPCM_TEAHC(0xf))
 242 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 243                                         FTIM1_GPCM_TRAD(0x3f))
 244 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 245                                         FTIM2_GPCM_TCH(0xf) | \
 246                                         FTIM2_GPCM_TWP(0xff))
 247 #define CONFIG_SYS_FPGA_FTIM3           0x0
 248 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 249 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 250 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 251 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 252 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 253 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 254 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 255 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 256 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 257 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 258 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 259 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 260 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 261 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 262 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 263 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 264
 265 /*
 266  * Serial Port
 267  */
 268 #ifdef CONFIG_LPUART
 269 #define CONFIG_LPUART_32B_REG
 270 #else
 271 #define CONFIG_CONS_INDEX               1
 272 #define CONFIG_SYS_NS16550_SERIAL
 273 #ifndef CONFIG_DM_SERIAL
 274 #define CONFIG_SYS_NS16550_REG_SIZE     1
 275 #endif
 276 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 277 #endif
 278
 279 #define CONFIG_BAUDRATE                 115200
 280
 281 /*
 282  * I2C
 283  */
 284 #define CONFIG_CMD_I2C
 285 #define CONFIG_SYS_I2C
 286 #define CONFIG_SYS_I2C_MXC
 287 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 288 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 289 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 290
 291 /* EEPROM */
 292 #define CONFIG_ID_EEPROM
 293 #define CONFIG_SYS_I2C_EEPROM_NXID
 294 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 295 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 296 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 297 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 298 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 299
 300 /*
 301  * MMC
 302  */
 303 #define CONFIG_MMC
 304 #define CONFIG_CMD_MMC
 305 #define CONFIG_FSL_ESDHC
 306 #define CONFIG_GENERIC_MMC
 307
 308 #define CONFIG_CMD_FAT
 309 #define CONFIG_DOS_PARTITION
 310
 311 /* SPI */
 312 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 313 /* QSPI */
 314 #define QSPI0_AMBA_BASE                 0x40000000
 315 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 316 #define FSL_QSPI_FLASH_NUM              2
 317
 318 /* DSPI */
 319 #endif
 320
 321 /* DM SPI */
 322 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 323 #define CONFIG_CMD_SF
 324 #define CONFIG_DM_SPI_FLASH
 325 #endif
 326
 327 /*
 328  * Video
 329  */
 330 #define CONFIG_FSL_DCU_FB
 331
 332 #ifdef CONFIG_FSL_DCU_FB
 333 #define CONFIG_VIDEO
 334 #define CONFIG_CMD_BMP
 335 #define CONFIG_CFB_CONSOLE
 336 #define CONFIG_VGA_AS_SINGLE_DEVICE
 337 #define CONFIG_VIDEO_LOGO
 338 #define CONFIG_VIDEO_BMP_LOGO
 339 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 340
 341 #define CONFIG_FSL_DCU_SII9022A
 342 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 343 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 344 #endif
 345
 346 /*
 347  * eTSEC
 348  */
 349 #define CONFIG_TSEC_ENET
 350
 351 #ifdef CONFIG_TSEC_ENET
 352 #define CONFIG_MII
 353 #define CONFIG_MII_DEFAULT_TSEC         1
 354 #define CONFIG_TSEC1                    1
 355 #define CONFIG_TSEC1_NAME               "eTSEC1"
 356 #define CONFIG_TSEC2                    1
 357 #define CONFIG_TSEC2_NAME               "eTSEC2"
 358 #define CONFIG_TSEC3                    1
 359 #define CONFIG_TSEC3_NAME               "eTSEC3"
 360
 361 #define TSEC1_PHY_ADDR                  2
 362 #define TSEC2_PHY_ADDR                  0
 363 #define TSEC3_PHY_ADDR                  1
 364
 365 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 366 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 367 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 368
 369 #define TSEC1_PHYIDX                    0
 370 #define TSEC2_PHYIDX                    0
 371 #define TSEC3_PHYIDX                    0
 372
 373 #define CONFIG_ETHPRIME                 "eTSEC1"
 374
 375 #define CONFIG_PHY_GIGE
 376 #define CONFIG_PHYLIB
 377 #define CONFIG_PHY_ATHEROS
 378
 379 #define CONFIG_HAS_ETH0
 380 #define CONFIG_HAS_ETH1
 381 #define CONFIG_HAS_ETH2
 382 #endif
 383
 384 /* PCIe */
 385 #define CONFIG_PCI              /* Enable PCI/PCIE */
 386 #define CONFIG_PCIE1            /* PCIE controler 1 */
 387 #define CONFIG_PCIE2            /* PCIE controler 2 */
 388 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 389 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 390
 391 #define CONFIG_SYS_PCI_64BIT
 392
 393 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 394 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 395 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 396 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 397
 398 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 399 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 400 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 401
 402 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 403 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 404 #define CONFIG_SYS_PCIE_MEM_SIZE        0x08000000      /* 128M */
 405
 406 #ifdef CONFIG_PCI
 407 #define CONFIG_PCI_PNP
 408 #define CONFIG_PCI_SCAN_SHOW
 409 #define CONFIG_CMD_PCI
 410 #endif
 411
 412 #define CONFIG_CMD_PING
 413 #define CONFIG_CMD_DHCP
 414 #define CONFIG_CMD_MII
 415
 416 #define CONFIG_CMDLINE_TAG
 417 #define CONFIG_CMDLINE_EDITING
 418
 419 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 420 #undef CONFIG_CMD_IMLS
 421 #endif
 422
 423 #define CONFIG_ARMV7_NONSEC
 424 #define CONFIG_ARMV7_VIRT
 425 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 426 #define CONFIG_LAYERSCAPE_NS_ACCESS
 427 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 428 #define CONFIG_TIMER_CLK_FREQ           12500000
 429
 430 #define CONFIG_HWCONFIG
 431 #define HWCONFIG_BUFFER_SIZE            256
 432
 433 #define CONFIG_FSL_DEVICE_DISABLE
 434
 435 #define CONFIG_BOOTDELAY                3
 436
 437 #ifdef CONFIG_LPUART
 438 #define CONFIG_EXTRA_ENV_SETTINGS       \
 439         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 440         "initrd_high=0xffffffff\0"      \
 441         "fdt_high=0xffffffff\0"
 442 #else
 443 #define CONFIG_EXTRA_ENV_SETTINGS       \
 444         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 445         "initrd_high=0xffffffff\0"      \
 446         "fdt_high=0xffffffff\0"
 447 #endif
 448
 449 /*
 450  * Miscellaneous configurable options
 451  */
 452 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 453 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 454 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 455 #define CONFIG_AUTO_COMPLETE
 456 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 457 #define CONFIG_SYS_PBSIZE               \
 458                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 459 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 460 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 461
 462 #define CONFIG_CMD_GREPENV
 463 #define CONFIG_CMD_MEMINFO
 464 #define CONFIG_CMD_MEMTEST
 465 #define CONFIG_SYS_MEMTEST_START        0x80000000
 466 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 467
 468 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 469
 470 #define CONFIG_LS102XA_STREAM_ID
 471
 472 /*
 473  * Stack sizes
 474  * The stack sizes are set up in start.S using the settings below
 475  */
 476 #define CONFIG_STACKSIZE                (30 * 1024)
 477
 478 #define CONFIG_SYS_INIT_SP_OFFSET \
 479         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 480 #define CONFIG_SYS_INIT_SP_ADDR \
 481         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 482
 483 #ifdef CONFIG_SPL_BUILD
 484 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 485 #else
 486 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 487 #endif
 488
 489 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 490
 491 /*
 492  * Environment
 493  */
 494 #define CONFIG_ENV_OVERWRITE
 495
 496 #if defined(CONFIG_SD_BOOT)
 497 #define CONFIG_ENV_OFFSET               0x100000
 498 #define CONFIG_ENV_IS_IN_MMC
 499 #define CONFIG_SYS_MMC_ENV_DEV          0
 500 #define CONFIG_ENV_SIZE                 0x20000
 501 #elif defined(CONFIG_QSPI_BOOT)
 502 #define CONFIG_ENV_IS_IN_SPI_FLASH
 503 #define CONFIG_ENV_SIZE                 0x2000
 504 #define CONFIG_ENV_OFFSET               0x100000
 505 #define CONFIG_ENV_SECT_SIZE            0x10000
 506 #else
 507 #define CONFIG_ENV_IS_IN_FLASH
 508 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 509 #define CONFIG_ENV_SIZE                 0x20000
 510 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 511 #endif
 512
 513 #define CONFIG_CMD_BOOTZ
 514
 515 #define CONFIG_MISC_INIT_R
 516
 517 /* Hash command with SHA acceleration supported in hardware */
 518 #ifdef CONFIG_FSL_CAAM
 519 #define CONFIG_CMD_HASH
 520 #define CONFIG_SHA_HW_ACCEL
 521 #endif
 522
 523 #include <asm/fsl_secure_boot.h>
 524 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 525
 526 #endif