2 * Copyright 2014 Freescale Semiconductor, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
10 #include <config_cmd_default.h>
12 #define CONFIG_LS102XA
14 #define CONFIG_SYS_GENERIC_BOARD
16 #define CONFIG_DISPLAY_CPUINFO
17 #define CONFIG_DISPLAY_BOARDINFO
19 #define CONFIG_SKIP_LOWLEVEL_INIT
20 #define CONFIG_BOARD_EARLY_INIT_F
23 * Size of malloc() pool
25 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
27 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
28 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
31 * Generic Timer Definitions
33 #define GENERIC_TIMER_CLK 12500000
35 #define CONFIG_SYS_CLK_FREQ 100000000
36 #define CONFIG_DDR_CLK_FREQ 100000000
38 #ifdef CONFIG_RAMBOOT_PBL
39 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
43 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
44 #define CONFIG_SPL_FRAMEWORK
45 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
46 #define CONFIG_SPL_LIBCOMMON_SUPPORT
47 #define CONFIG_SPL_LIBGENERIC_SUPPORT
48 #define CONFIG_SPL_ENV_SUPPORT
49 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
50 #define CONFIG_SPL_I2C_SUPPORT
51 #define CONFIG_SPL_WATCHDOG_SUPPORT
52 #define CONFIG_SPL_SERIAL_SUPPORT
53 #define CONFIG_SPL_MMC_SUPPORT
54 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
55 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
57 #define CONFIG_SPL_TEXT_BASE 0x10000000
58 #define CONFIG_SPL_MAX_SIZE 0x1a000
59 #define CONFIG_SPL_STACK 0x1001d000
60 #define CONFIG_SPL_PAD_TO 0x1c000
61 #define CONFIG_SYS_TEXT_BASE 0x82000000
63 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000
64 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
65 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
66 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
67 #define CONFIG_SYS_MONITOR_LEN 0x80000
70 #ifdef CONFIG_QSPI_BOOT
71 #define CONFIG_SYS_TEXT_BASE 0x40010000
72 #define CONFIG_SYS_NO_FLASH
75 #ifndef CONFIG_SYS_TEXT_BASE
76 #define CONFIG_SYS_TEXT_BASE 0x67f80000
79 #define CONFIG_NR_DRAM_BANKS 1
80 #define PHYS_SDRAM 0x80000000
81 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
83 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
84 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
86 #define CONFIG_SYS_HAS_SERDES
88 #define CONFIG_FSL_CAAM /* Enable CAAM */
90 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
91 !defined(CONFIG_QSPI_BOOT)
98 #ifndef CONFIG_QSPI_BOOT
99 #define CONFIG_FSL_IFC
100 #define CONFIG_SYS_FLASH_BASE 0x60000000
101 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
103 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
104 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
105 CSPR_PORT_SIZE_16 | \
108 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
110 /* NOR Flash Timing Params */
111 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
113 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
114 FTIM0_NOR_TEADC(0x5) | \
115 FTIM0_NOR_TAVDS(0x0) | \
116 FTIM0_NOR_TEAHC(0x5))
117 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
118 FTIM1_NOR_TRAD_NOR(0x1A) | \
119 FTIM1_NOR_TSEQRAD_NOR(0x13))
120 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
121 FTIM2_NOR_TCH(0x4) | \
122 FTIM2_NOR_TWP(0x1c) | \
123 FTIM2_NOR_TWPH(0x0e))
124 #define CONFIG_SYS_NOR_FTIM3 0
126 #define CONFIG_FLASH_CFI_DRIVER
127 #define CONFIG_SYS_FLASH_CFI
128 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
129 #define CONFIG_SYS_FLASH_QUIET_TEST
130 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
132 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
133 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
134 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
135 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
137 #define CONFIG_SYS_FLASH_EMPTY_INFO
138 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
140 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
141 #define CONFIG_SYS_WRITE_SWAPPED_DATA
146 #define CONFIG_SYS_CPLD_BASE 0x7fb00000
147 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
149 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
150 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
154 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
155 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
156 CSOR_NOR_NOR_MODE_AVD_NOR | \
159 /* CPLD Timing parameters for IFC GPCM */
160 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
161 FTIM0_GPCM_TEADC(0xf) | \
162 FTIM0_GPCM_TEAHC(0xf))
163 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
164 FTIM1_GPCM_TRAD(0x3f))
165 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
166 FTIM2_GPCM_TCH(0xf) | \
167 FTIM2_GPCM_TWP(0xff))
168 #define CONFIG_SYS_FPGA_FTIM3 0x0
169 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
170 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
171 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
172 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
173 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
174 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
175 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
176 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
177 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
178 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
179 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
180 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
181 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
182 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
183 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
184 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
190 #define CONFIG_FSL_LPUART
191 #define CONFIG_LPUART_32B_REG
193 #define CONFIG_CONS_INDEX 1
194 #define CONFIG_SYS_NS16550
195 #define CONFIG_SYS_NS16550_SERIAL
196 #define CONFIG_SYS_NS16550_REG_SIZE 1
197 #define CONFIG_SYS_NS16550_CLK get_serial_clock()
200 #define CONFIG_BAUDRATE 115200
205 #define CONFIG_CMD_I2C
206 #define CONFIG_SYS_I2C
207 #define CONFIG_SYS_I2C_MXC
210 #ifndef CONFIG_SD_BOOT
211 #define CONFIG_ID_EEPROM
212 #define CONFIG_SYS_I2C_EEPROM_NXID
213 #define CONFIG_SYS_EEPROM_BUS_NUM 1
214 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
215 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
216 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
217 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
224 #define CONFIG_CMD_MMC
225 #define CONFIG_FSL_ESDHC
226 #define CONFIG_GENERIC_MMC
228 #define CONFIG_CMD_FAT
229 #define CONFIG_DOS_PARTITION
232 #ifdef CONFIG_QSPI_BOOT
233 #define CONFIG_FSL_QSPI
234 #define QSPI0_AMBA_BASE 0x40000000
235 #define FSL_QSPI_FLASH_SIZE (1 << 24)
236 #define FSL_QSPI_FLASH_NUM 2
238 #define CONFIG_CMD_SF
239 #define CONFIG_SPI_FLASH
240 #define CONFIG_SPI_FLASH_STMICRO
246 #define CONFIG_FSL_DCU_FB
248 #ifdef CONFIG_FSL_DCU_FB
250 #define CONFIG_CMD_BMP
251 #define CONFIG_CFB_CONSOLE
252 #define CONFIG_VGA_AS_SINGLE_DEVICE
253 #define CONFIG_VIDEO_LOGO
254 #define CONFIG_VIDEO_BMP_LOGO
256 #define CONFIG_FSL_DCU_SII9022A
257 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1
258 #define CONFIG_SYS_I2C_DVI_ADDR 0x39
264 #define CONFIG_TSEC_ENET
266 #ifdef CONFIG_TSEC_ENET
268 #define CONFIG_MII_DEFAULT_TSEC 1
269 #define CONFIG_TSEC1 1
270 #define CONFIG_TSEC1_NAME "eTSEC1"
271 #define CONFIG_TSEC2 1
272 #define CONFIG_TSEC2_NAME "eTSEC2"
273 #define CONFIG_TSEC3 1
274 #define CONFIG_TSEC3_NAME "eTSEC3"
276 #define TSEC1_PHY_ADDR 2
277 #define TSEC2_PHY_ADDR 0
278 #define TSEC3_PHY_ADDR 1
280 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
281 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
282 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
284 #define TSEC1_PHYIDX 0
285 #define TSEC2_PHYIDX 0
286 #define TSEC3_PHYIDX 0
288 #define CONFIG_ETHPRIME "eTSEC1"
290 #define CONFIG_PHY_GIGE
291 #define CONFIG_PHYLIB
292 #define CONFIG_PHY_ATHEROS
294 #define CONFIG_HAS_ETH0
295 #define CONFIG_HAS_ETH1
296 #define CONFIG_HAS_ETH2
300 #define CONFIG_PCI /* Enable PCI/PCIE */
301 #define CONFIG_PCIE1 /* PCIE controler 1 */
302 #define CONFIG_PCIE2 /* PCIE controler 2 */
303 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
304 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
306 #define CONFIG_SYS_PCI_64BIT
308 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
309 #define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
310 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
311 #define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
313 #define CONFIG_SYS_PCIE_IO_BUS 0x00000000
314 #define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
315 #define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
317 #define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
318 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
319 #define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
322 #define CONFIG_NET_MULTI
323 #define CONFIG_PCI_PNP
325 #define CONFIG_PCI_SCAN_SHOW
326 #define CONFIG_CMD_PCI
327 #define CONFIG_CMD_NET
330 #define CONFIG_CMD_PING
331 #define CONFIG_CMD_DHCP
332 #define CONFIG_CMD_MII
333 #define CONFIG_CMD_NET
335 #define CONFIG_CMDLINE_TAG
336 #define CONFIG_CMDLINE_EDITING
338 #ifdef CONFIG_QSPI_BOOT
339 #undef CONFIG_CMD_IMLS
341 #define CONFIG_CMD_IMLS
344 #define CONFIG_ARMV7_NONSEC
345 #define CONFIG_ARMV7_VIRT
346 #define CONFIG_PEN_ADDR_BIG_ENDIAN
347 #define CONFIG_LS102XA_NS_ACCESS
348 #define CONFIG_SMP_PEN_ADDR 0x01ee0200
349 #define CONFIG_TIMER_CLK_FREQ 12500000
350 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
352 #define CONFIG_HWCONFIG
353 #define HWCONFIG_BUFFER_SIZE 128
355 #define CONFIG_BOOTDELAY 3
358 #define CONFIG_EXTRA_ENV_SETTINGS \
359 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
360 "initrd_high=0xcfffffff\0" \
361 "fdt_high=0xcfffffff\0"
363 #define CONFIG_EXTRA_ENV_SETTINGS \
364 "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
365 "initrd_high=0xcfffffff\0" \
366 "fdt_high=0xcfffffff\0"
370 * Miscellaneous configurable options
372 #define CONFIG_SYS_LONGHELP /* undef to save memory */
373 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
374 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
375 #define CONFIG_AUTO_COMPLETE
376 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
377 #define CONFIG_SYS_PBSIZE \
378 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
379 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
380 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
382 #define CONFIG_CMD_ENV_EXISTS
383 #define CONFIG_CMD_GREPENV
384 #define CONFIG_CMD_MEMINFO
385 #define CONFIG_CMD_MEMTEST
386 #define CONFIG_SYS_MEMTEST_START 0x80000000
387 #define CONFIG_SYS_MEMTEST_END 0x9fffffff
389 #define CONFIG_SYS_LOAD_ADDR 0x82000000
391 #define CONFIG_LS102XA_STREAM_ID
395 * The stack sizes are set up in start.S using the settings below
397 #define CONFIG_STACKSIZE (30 * 1024)
399 #define CONFIG_SYS_INIT_SP_OFFSET \
400 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
401 #define CONFIG_SYS_INIT_SP_ADDR \
402 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
404 #ifdef CONFIG_SPL_BUILD
405 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
407 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
410 #define CONFIG_SYS_QE_FW_ADDR 0x67f40000
415 #define CONFIG_ENV_OVERWRITE
417 #if defined(CONFIG_SD_BOOT)
418 #define CONFIG_ENV_OFFSET 0x100000
419 #define CONFIG_ENV_IS_IN_MMC
420 #define CONFIG_SYS_MMC_ENV_DEV 0
421 #define CONFIG_ENV_SIZE 0x20000
422 #elif defined(CONFIG_QSPI_BOOT)
423 #define CONFIG_ENV_IS_IN_SPI_FLASH
424 #define CONFIG_ENV_SIZE 0x2000
425 #define CONFIG_ENV_OFFSET 0x100000
426 #define CONFIG_ENV_SECT_SIZE 0x10000
428 #define CONFIG_ENV_IS_IN_FLASH
429 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
430 #define CONFIG_ENV_SIZE 0x20000
431 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
434 #define CONFIG_OF_LIBFDT
435 #define CONFIG_OF_BOARD_SETUP
436 #define CONFIG_CMD_BOOTZ
438 #define CONFIG_MISC_INIT_R
440 /* Hash command with SHA acceleration supported in hardware */
441 #define CONFIG_CMD_HASH
442 #define CONFIG_SHA_HW_ACCEL
444 #ifdef CONFIG_SECURE_BOOT
445 #define CONFIG_CMD_BLOB