1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2014 Freescale Semiconductor, Inc.
10 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
12 #define CONFIG_DEEP_SLEEP
14 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
15 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
17 #define DDR_SDRAM_CFG 0x470c0008
18 #define DDR_CS0_BNDS 0x008000bf
19 #define DDR_CS0_CONFIG 0x80014302
20 #define DDR_TIMING_CFG_0 0x50550004
21 #define DDR_TIMING_CFG_1 0xbcb38c56
22 #define DDR_TIMING_CFG_2 0x0040d120
23 #define DDR_TIMING_CFG_3 0x010e1000
24 #define DDR_TIMING_CFG_4 0x00000001
25 #define DDR_TIMING_CFG_5 0x03401400
26 #define DDR_SDRAM_CFG_2 0x00401010
27 #define DDR_SDRAM_MODE 0x00061c60
28 #define DDR_SDRAM_MODE_2 0x00180000
29 #define DDR_SDRAM_INTERVAL 0x18600618
30 #define DDR_DDR_WRLVL_CNTL 0x8655f605
31 #define DDR_DDR_WRLVL_CNTL_2 0x05060607
32 #define DDR_DDR_WRLVL_CNTL_3 0x05050505
33 #define DDR_DDR_CDR1 0x80040000
34 #define DDR_DDR_CDR2 0x00000001
35 #define DDR_SDRAM_CLK_CNTL 0x02000000
36 #define DDR_DDR_ZQ_CNTL 0x89080600
37 #define DDR_CS0_CONFIG_2 0
38 #define DDR_SDRAM_CFG_MEM_EN 0x80000000
39 #define SDRAM_CFG2_D_INIT 0x00000010
40 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080
41 #define SDRAM_CFG2_FRC_SR 0x80000000
42 #define SDRAM_CFG_BI 0x00000001
45 #ifdef CONFIG_NXP_ESBC
47 * HDR would be appended at end of image and copied to DDR along
50 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
51 #endif /* ifdef CONFIG_NXP_ESBC */
53 #define CONFIG_SPL_MAX_SIZE 0x1a000
54 #define CONFIG_SPL_STACK 0x1001d000
55 #define CONFIG_SPL_PAD_TO 0x1c000
57 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
58 CONFIG_SYS_MONITOR_LEN)
59 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
60 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
61 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
63 #ifdef CONFIG_U_BOOT_HDR_SIZE
65 * HDR would be appended at end of image and copied to DDR along
66 * with U-Boot image. Here u-boot max. size is 512K. So if binary
67 * size increases then increase this size in case of secure boot as
68 * it uses raw u-boot image instead of fit image.
70 #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
72 #define CONFIG_SYS_MONITOR_LEN 0x100000
73 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
76 #define PHYS_SDRAM 0x80000000
77 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
79 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
80 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
82 #define CONFIG_CHIP_SELECTS_PER_CTRL 4
87 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
88 #define CONFIG_SYS_FLASH_BASE 0x60000000
89 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
91 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
92 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
96 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
98 /* NOR Flash Timing Params */
99 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
101 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
102 FTIM0_NOR_TEADC(0x5) | \
103 FTIM0_NOR_TAVDS(0x0) | \
104 FTIM0_NOR_TEAHC(0x5))
105 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
106 FTIM1_NOR_TRAD_NOR(0x1A) | \
107 FTIM1_NOR_TSEQRAD_NOR(0x13))
108 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
109 FTIM2_NOR_TCH(0x4) | \
110 FTIM2_NOR_TWP(0x1c) | \
111 FTIM2_NOR_TWPH(0x0e))
112 #define CONFIG_SYS_NOR_FTIM3 0
114 #define CONFIG_SYS_FLASH_QUIET_TEST
115 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
117 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
118 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
119 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
120 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
122 #define CONFIG_SYS_FLASH_EMPTY_INFO
123 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
125 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
126 #define CONFIG_SYS_WRITE_SWAPPED_DATA
131 #define CONFIG_SYS_CPLD_BASE 0x7fb00000
132 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
134 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
135 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
139 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
140 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
141 CSOR_NOR_NOR_MODE_AVD_NOR | \
144 /* CPLD Timing parameters for IFC GPCM */
145 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
146 FTIM0_GPCM_TEADC(0xf) | \
147 FTIM0_GPCM_TEAHC(0xf))
148 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
149 FTIM1_GPCM_TRAD(0x3f))
150 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
151 FTIM2_GPCM_TCH(0xf) | \
152 FTIM2_GPCM_TWP(0xff))
153 #define CONFIG_SYS_FPGA_FTIM3 0x0
154 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
155 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
156 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
157 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
158 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
159 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
160 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
161 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
162 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
163 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
164 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
165 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
166 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
167 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
168 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
169 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
175 #define CONFIG_LPUART_32B_REG
177 #define CONFIG_SYS_NS16550_SERIAL
178 #ifndef CONFIG_DM_SERIAL
179 #define CONFIG_SYS_NS16550_REG_SIZE 1
181 #define CONFIG_SYS_NS16550_CLK get_serial_clock()
191 #define CONFIG_SYS_I2C_EEPROM_NXID
192 #define CONFIG_SYS_EEPROM_BUS_NUM 1
201 #ifdef CONFIG_VIDEO_FSL_DCU_FB
202 #define CONFIG_VIDEO_LOGO
203 #define CONFIG_VIDEO_BMP_LOGO
205 #define CONFIG_FSL_DCU_SII9022A
206 #define CONFIG_SYS_I2C_DVI_BUS_NUM 1
207 #define CONFIG_SYS_I2C_DVI_ADDR 0x39
214 #ifdef CONFIG_TSEC_ENET
215 #define CONFIG_ETHPRIME "ethernet@2d10000"
219 #define CONFIG_PCIE1 /* PCIE controller 1 */
220 #define CONFIG_PCIE2 /* PCIE controller 2 */
223 #define CONFIG_PCI_SCAN_SHOW
226 #define CONFIG_PEN_ADDR_BIG_ENDIAN
227 #define CONFIG_LAYERSCAPE_NS_ACCESS
228 #define CONFIG_SMP_PEN_ADDR 0x01ee0200
229 #define COUNTER_FREQUENCY 12500000
231 #define CONFIG_HWCONFIG
232 #define HWCONFIG_BUFFER_SIZE 256
234 #define CONFIG_FSL_DEVICE_DISABLE
236 #define BOOT_TARGET_DEVICES(func) \
240 #include <config_distro_bootcmd.h>
243 #define CONFIG_EXTRA_ENV_SETTINGS \
244 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
245 "cma=64M@0x0-0xb0000000\0" \
246 "initrd_high=0xffffffff\0" \
247 "fdt_addr=0x64f00000\0" \
248 "kernel_addr=0x65000000\0" \
249 "scriptaddr=0x80000000\0" \
250 "scripthdraddr=0x80080000\0" \
251 "fdtheader_addr_r=0x80100000\0" \
252 "kernelheader_addr_r=0x80200000\0" \
253 "kernel_addr_r=0x81000000\0" \
254 "fdt_addr_r=0x90000000\0" \
255 "ramdisk_addr_r=0xa0000000\0" \
256 "load_addr=0xa0000000\0" \
257 "kernel_size=0x2800000\0" \
258 "kernel_addr_sd=0x8000\0" \
259 "kernel_size_sd=0x14000\0" \
260 "othbootargs=cma=64M@0x0-0xb0000000\0" \
262 "boot_scripts=ls1021atwr_boot.scr\0" \
263 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
264 "scan_dev_for_boot_part=" \
265 "part list ${devtype} ${devnum} devplist; " \
266 "env exists devplist || setenv devplist 1; " \
267 "for distro_bootpart in ${devplist}; do " \
268 "if fstype ${devtype} " \
269 "${devnum}:${distro_bootpart} " \
270 "bootfstype; then " \
271 "run scan_dev_for_boot; " \
274 "scan_dev_for_boot=" \
275 "echo Scanning ${devtype} " \
276 "${devnum}:${distro_bootpart}...; " \
277 "for prefix in ${boot_prefixes}; do " \
278 "run scan_dev_for_scripts; " \
282 "load ${devtype} ${devnum}:${distro_bootpart} " \
283 "${scriptaddr} ${prefix}${script}; " \
284 "env exists secureboot && load ${devtype} " \
285 "${devnum}:${distro_bootpart} " \
286 "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
287 "env exists secureboot " \
288 "&& esbc_validate ${scripthdraddr};" \
289 "source ${scriptaddr}\0" \
290 "installer=load mmc 0:2 $load_addr " \
291 "/flex_installer_arm32.itb; " \
292 "bootm $load_addr#ls1021atwr\0" \
293 "qspi_bootcmd=echo Trying load from qspi..;" \
294 "sf probe && sf read $load_addr " \
295 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
296 "nor_bootcmd=echo Trying load from nor..;" \
297 "cp.b $kernel_addr $load_addr " \
298 "$kernel_size && bootm $load_addr#$board\0"
300 #define CONFIG_EXTRA_ENV_SETTINGS \
301 "bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
302 "cma=64M@0x0-0xb0000000\0" \
303 "initrd_high=0xffffffff\0" \
304 "fdt_addr=0x64f00000\0" \
305 "kernel_addr=0x61000000\0" \
306 "kernelheader_addr=0x60800000\0" \
307 "scriptaddr=0x80000000\0" \
308 "scripthdraddr=0x80080000\0" \
309 "fdtheader_addr_r=0x80100000\0" \
310 "kernelheader_addr_r=0x80200000\0" \
311 "kernel_addr_r=0x81000000\0" \
312 "kernelheader_size=0x40000\0" \
313 "fdt_addr_r=0x90000000\0" \
314 "ramdisk_addr_r=0xa0000000\0" \
315 "load_addr=0xa0000000\0" \
316 "kernel_size=0x2800000\0" \
317 "kernel_addr_sd=0x8000\0" \
318 "kernel_size_sd=0x14000\0" \
319 "kernelhdr_addr_sd=0x4000\0" \
320 "kernelhdr_size_sd=0x10\0" \
321 "othbootargs=cma=64M@0x0-0xb0000000\0" \
323 "boot_scripts=ls1021atwr_boot.scr\0" \
324 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
325 "scan_dev_for_boot_part=" \
326 "part list ${devtype} ${devnum} devplist; " \
327 "env exists devplist || setenv devplist 1; " \
328 "for distro_bootpart in ${devplist}; do " \
329 "if fstype ${devtype} " \
330 "${devnum}:${distro_bootpart} " \
331 "bootfstype; then " \
332 "run scan_dev_for_boot; " \
335 "scan_dev_for_boot=" \
336 "echo Scanning ${devtype} " \
337 "${devnum}:${distro_bootpart}...; " \
338 "for prefix in ${boot_prefixes}; do " \
339 "run scan_dev_for_scripts; " \
343 "load ${devtype} ${devnum}:${distro_bootpart} " \
344 "${scriptaddr} ${prefix}${script}; " \
345 "env exists secureboot && load ${devtype} " \
346 "${devnum}:${distro_bootpart} " \
347 "${scripthdraddr} ${prefix}${boot_script_hdr} " \
348 "&& esbc_validate ${scripthdraddr};" \
349 "source ${scriptaddr}\0" \
350 "qspi_bootcmd=echo Trying load from qspi..;" \
351 "sf probe && sf read $load_addr " \
352 "$kernel_addr $kernel_size; env exists secureboot " \
353 "&& sf read $kernelheader_addr_r $kernelheader_addr " \
354 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
355 "bootm $load_addr#$board\0" \
356 "nor_bootcmd=echo Trying load from nor..;" \
357 "cp.b $kernel_addr $load_addr " \
358 "$kernel_size; env exists secureboot " \
359 "&& cp.b $kernelheader_addr $kernelheader_addr_r " \
360 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
361 "bootm $load_addr#$board\0" \
362 "sd_bootcmd=echo Trying load from SD ..;" \
363 "mmcinfo && mmc read $load_addr " \
364 "$kernel_addr_sd $kernel_size_sd && " \
365 "env exists secureboot && mmc read $kernelheader_addr_r " \
366 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
367 " && esbc_validate ${kernelheader_addr_r};" \
368 "bootm $load_addr#$board\0"
372 * Miscellaneous configurable options
374 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)
376 #define CONFIG_LS102XA_STREAM_ID
378 #define CONFIG_SYS_INIT_SP_OFFSET \
379 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
380 #define CONFIG_SYS_INIT_SP_ADDR \
381 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
383 #ifdef CONFIG_SPL_BUILD
384 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
386 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
393 #include <asm/fsl_secure_boot.h>
394 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */