1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2014 Freescale Semiconductor, Inc.
4 * Copyright 2019, 2021 NXP
10 #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
11 #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
13 #define DDR_SDRAM_CFG 0x470c0008
14 #define DDR_CS0_BNDS 0x008000bf
15 #define DDR_CS0_CONFIG 0x80014302
16 #define DDR_TIMING_CFG_0 0x50550004
17 #define DDR_TIMING_CFG_1 0xbcb38c56
18 #define DDR_TIMING_CFG_2 0x0040d120
19 #define DDR_TIMING_CFG_3 0x010e1000
20 #define DDR_TIMING_CFG_4 0x00000001
21 #define DDR_TIMING_CFG_5 0x03401400
22 #define DDR_SDRAM_CFG_2 0x00401010
23 #define DDR_SDRAM_MODE 0x00061c60
24 #define DDR_SDRAM_MODE_2 0x00180000
25 #define DDR_SDRAM_INTERVAL 0x18600618
26 #define DDR_DDR_WRLVL_CNTL 0x8655f605
27 #define DDR_DDR_WRLVL_CNTL_2 0x05060607
28 #define DDR_DDR_WRLVL_CNTL_3 0x05050505
29 #define DDR_DDR_CDR1 0x80040000
30 #define DDR_DDR_CDR2 0x00000001
31 #define DDR_SDRAM_CLK_CNTL 0x02000000
32 #define DDR_DDR_ZQ_CNTL 0x89080600
33 #define DDR_CS0_CONFIG_2 0
34 #define DDR_SDRAM_CFG_MEM_EN 0x80000000
35 #define SDRAM_CFG2_D_INIT 0x00000010
36 #define DDR_CDR2_VREF_TRAIN_EN 0x00000080
37 #define SDRAM_CFG2_FRC_SR 0x80000000
38 #define SDRAM_CFG_BI 0x00000001
41 #ifdef CONFIG_NXP_ESBC
43 * HDR would be appended at end of image and copied to DDR along
46 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
47 #endif /* ifdef CONFIG_NXP_ESBC */
49 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
50 CONFIG_SYS_MONITOR_LEN)
51 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
52 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
54 #ifdef CONFIG_U_BOOT_HDR_SIZE
56 * HDR would be appended at end of image and copied to DDR along
57 * with U-Boot image. Here u-boot max. size is 512K. So if binary
58 * size increases then increase this size in case of secure boot as
59 * it uses raw u-boot image instead of fit image.
61 #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
63 #define CONFIG_SYS_MONITOR_LEN 0x100000
64 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
67 #define PHYS_SDRAM 0x80000000
68 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
70 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
71 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
76 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
77 #define CONFIG_SYS_FLASH_BASE 0x60000000
78 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
80 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
81 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
85 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
87 /* NOR Flash Timing Params */
88 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
90 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
91 FTIM0_NOR_TEADC(0x5) | \
92 FTIM0_NOR_TAVDS(0x0) | \
94 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
95 FTIM1_NOR_TRAD_NOR(0x1A) | \
96 FTIM1_NOR_TSEQRAD_NOR(0x13))
97 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
98 FTIM2_NOR_TCH(0x4) | \
99 FTIM2_NOR_TWP(0x1c) | \
100 FTIM2_NOR_TWPH(0x0e))
101 #define CONFIG_SYS_NOR_FTIM3 0
103 #define CONFIG_SYS_FLASH_QUIET_TEST
104 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
106 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
107 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
108 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
110 #define CONFIG_SYS_FLASH_EMPTY_INFO
111 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
113 #define CONFIG_SYS_WRITE_SWAPPED_DATA
118 #define CONFIG_SYS_CPLD_BASE 0x7fb00000
119 #define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
121 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
122 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
126 #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
127 #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
128 CSOR_NOR_NOR_MODE_AVD_NOR | \
131 /* CPLD Timing parameters for IFC GPCM */
132 #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
133 FTIM0_GPCM_TEADC(0xf) | \
134 FTIM0_GPCM_TEAHC(0xf))
135 #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
136 FTIM1_GPCM_TRAD(0x3f))
137 #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
138 FTIM2_GPCM_TCH(0xf) | \
139 FTIM2_GPCM_TWP(0xff))
140 #define CONFIG_SYS_FPGA_FTIM3 0x0
141 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
142 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
143 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
144 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
145 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
146 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
147 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
148 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
149 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
150 #define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
151 #define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
152 #define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
153 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
154 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
155 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
156 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
161 #ifndef CONFIG_LPUART
162 #define CONFIG_SYS_NS16550_SERIAL
163 #ifndef CONFIG_DM_SERIAL
164 #define CONFIG_SYS_NS16550_REG_SIZE 1
166 #define CONFIG_SYS_NS16550_CLK get_serial_clock()
176 #define CONFIG_SYS_I2C_EEPROM_NXID
177 #define CONFIG_SYS_EEPROM_BUS_NUM 1
180 #define CONFIG_PCIE1 /* PCIE controller 1 */
181 #define CONFIG_PCIE2 /* PCIE controller 2 */
184 #define CONFIG_PCI_SCAN_SHOW
187 #define CONFIG_PEN_ADDR_BIG_ENDIAN
188 #define CONFIG_LAYERSCAPE_NS_ACCESS
189 #define CONFIG_SMP_PEN_ADDR 0x01ee0200
191 #define CONFIG_HWCONFIG
192 #define HWCONFIG_BUFFER_SIZE 256
194 #define CONFIG_FSL_DEVICE_DISABLE
196 #define BOOT_TARGET_DEVICES(func) \
200 #include <config_distro_bootcmd.h>
203 #define CONFIG_EXTRA_ENV_SETTINGS \
204 "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
205 "cma=64M@0x0-0xb0000000\0" \
206 "initrd_high=0xffffffff\0" \
207 "kernel_addr=0x65000000\0" \
208 "scriptaddr=0x80000000\0" \
209 "scripthdraddr=0x80080000\0" \
210 "fdtheader_addr_r=0x80100000\0" \
211 "kernelheader_addr_r=0x80200000\0" \
212 "kernel_addr_r=0x81000000\0" \
213 "fdt_addr_r=0x90000000\0" \
214 "ramdisk_addr_r=0xa0000000\0" \
215 "load_addr=0xa0000000\0" \
216 "kernel_size=0x2800000\0" \
217 "kernel_addr_sd=0x8000\0" \
218 "kernel_size_sd=0x14000\0" \
219 "othbootargs=cma=64M@0x0-0xb0000000\0" \
221 "boot_scripts=ls1021atwr_boot.scr\0" \
222 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
223 "scan_dev_for_boot_part=" \
224 "part list ${devtype} ${devnum} devplist; " \
225 "env exists devplist || setenv devplist 1; " \
226 "for distro_bootpart in ${devplist}; do " \
227 "if fstype ${devtype} " \
228 "${devnum}:${distro_bootpart} " \
229 "bootfstype; then " \
230 "run scan_dev_for_boot; " \
233 "scan_dev_for_boot=" \
234 "echo Scanning ${devtype} " \
235 "${devnum}:${distro_bootpart}...; " \
236 "for prefix in ${boot_prefixes}; do " \
237 "run scan_dev_for_scripts; " \
241 "load ${devtype} ${devnum}:${distro_bootpart} " \
242 "${scriptaddr} ${prefix}${script}; " \
243 "env exists secureboot && load ${devtype} " \
244 "${devnum}:${distro_bootpart} " \
245 "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
246 "env exists secureboot " \
247 "&& esbc_validate ${scripthdraddr};" \
248 "source ${scriptaddr}\0" \
249 "installer=load mmc 0:2 $load_addr " \
250 "/flex_installer_arm32.itb; " \
251 "bootm $load_addr#ls1021atwr\0" \
252 "qspi_bootcmd=echo Trying load from qspi..;" \
253 "sf probe && sf read $load_addr " \
254 "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
255 "nor_bootcmd=echo Trying load from nor..;" \
256 "cp.b $kernel_addr $load_addr " \
257 "$kernel_size && bootm $load_addr#$board\0"
259 #define CONFIG_EXTRA_ENV_SETTINGS \
260 "bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
261 "cma=64M@0x0-0xb0000000\0" \
262 "initrd_high=0xffffffff\0" \
263 "kernel_addr=0x61000000\0" \
264 "kernelheader_addr=0x60800000\0" \
265 "scriptaddr=0x80000000\0" \
266 "scripthdraddr=0x80080000\0" \
267 "fdtheader_addr_r=0x80100000\0" \
268 "kernelheader_addr_r=0x80200000\0" \
269 "kernel_addr_r=0x81000000\0" \
270 "kernelheader_size=0x40000\0" \
271 "fdt_addr_r=0x90000000\0" \
272 "ramdisk_addr_r=0xa0000000\0" \
273 "load_addr=0xa0000000\0" \
274 "kernel_size=0x2800000\0" \
275 "kernel_addr_sd=0x8000\0" \
276 "kernel_size_sd=0x14000\0" \
277 "kernelhdr_addr_sd=0x4000\0" \
278 "kernelhdr_size_sd=0x10\0" \
279 "othbootargs=cma=64M@0x0-0xb0000000\0" \
281 "boot_scripts=ls1021atwr_boot.scr\0" \
282 "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
283 "scan_dev_for_boot_part=" \
284 "part list ${devtype} ${devnum} devplist; " \
285 "env exists devplist || setenv devplist 1; " \
286 "for distro_bootpart in ${devplist}; do " \
287 "if fstype ${devtype} " \
288 "${devnum}:${distro_bootpart} " \
289 "bootfstype; then " \
290 "run scan_dev_for_boot; " \
293 "scan_dev_for_boot=" \
294 "echo Scanning ${devtype} " \
295 "${devnum}:${distro_bootpart}...; " \
296 "for prefix in ${boot_prefixes}; do " \
297 "run scan_dev_for_scripts; " \
301 "load ${devtype} ${devnum}:${distro_bootpart} " \
302 "${scriptaddr} ${prefix}${script}; " \
303 "env exists secureboot && load ${devtype} " \
304 "${devnum}:${distro_bootpart} " \
305 "${scripthdraddr} ${prefix}${boot_script_hdr} " \
306 "&& esbc_validate ${scripthdraddr};" \
307 "source ${scriptaddr}\0" \
308 "qspi_bootcmd=echo Trying load from qspi..;" \
309 "sf probe && sf read $load_addr " \
310 "$kernel_addr $kernel_size; env exists secureboot " \
311 "&& sf read $kernelheader_addr_r $kernelheader_addr " \
312 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
313 "bootm $load_addr#$board\0" \
314 "nor_bootcmd=echo Trying load from nor..;" \
315 "cp.b $kernel_addr $load_addr " \
316 "$kernel_size; env exists secureboot " \
317 "&& cp.b $kernelheader_addr $kernelheader_addr_r " \
318 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
319 "bootm $load_addr#$board\0" \
320 "sd_bootcmd=echo Trying load from SD ..;" \
321 "mmcinfo && mmc read $load_addr " \
322 "$kernel_addr_sd $kernel_size_sd && " \
323 "env exists secureboot && mmc read $kernelheader_addr_r " \
324 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
325 " && esbc_validate ${kernelheader_addr_r};" \
326 "bootm $load_addr#$board\0"
330 * Miscellaneous configurable options
332 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)
334 #define CONFIG_LS102XA_STREAM_ID
340 #include <asm/fsl_secure_boot.h>
341 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */