include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_SYS_FSL_CLK
  13
  14 #define CONFIG_SKIP_LOWLEVEL_INIT
  15 #define CONFIG_DEEP_SLEEP
  16
  17 /*
  18  * Size of malloc() pool
  19  */
  20 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  21
  22 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  23 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  24
  25 #define CONFIG_SYS_CLK_FREQ             100000000
  26 #define CONFIG_DDR_CLK_FREQ             100000000
  27
  28 #define DDR_SDRAM_CFG                   0x470c0008
  29 #define DDR_CS0_BNDS                    0x008000bf
  30 #define DDR_CS0_CONFIG                  0x80014302
  31 #define DDR_TIMING_CFG_0                0x50550004
  32 #define DDR_TIMING_CFG_1                0xbcb38c56
  33 #define DDR_TIMING_CFG_2                0x0040d120
  34 #define DDR_TIMING_CFG_3                0x010e1000
  35 #define DDR_TIMING_CFG_4                0x00000001
  36 #define DDR_TIMING_CFG_5                0x03401400
  37 #define DDR_SDRAM_CFG_2                 0x00401010
  38 #define DDR_SDRAM_MODE                  0x00061c60
  39 #define DDR_SDRAM_MODE_2                0x00180000
  40 #define DDR_SDRAM_INTERVAL              0x18600618
  41 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  42 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  43 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  44 #define DDR_DDR_CDR1                    0x80040000
  45 #define DDR_DDR_CDR2                    0x00000001
  46 #define DDR_SDRAM_CLK_CNTL              0x02000000
  47 #define DDR_DDR_ZQ_CNTL                 0x89080600
  48 #define DDR_CS0_CONFIG_2                0
  49 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  50 #define SDRAM_CFG2_D_INIT               0x00000010
  51 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  52 #define SDRAM_CFG2_FRC_SR               0x80000000
  53 #define SDRAM_CFG_BI                    0x00000001
  54
  55 #ifdef CONFIG_RAMBOOT_PBL
  56 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  57 #endif
  58
  59 #ifdef CONFIG_SD_BOOT
  60 #ifdef CONFIG_SD_BOOT_QSPI
  61 #define CONFIG_SYS_FSL_PBL_RCW  \
  62         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  63 #else
  64 #define CONFIG_SYS_FSL_PBL_RCW  \
  65         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
  66 #endif
  67
  68 #ifdef CONFIG_NXP_ESBC
  69 /*
  70  * HDR would be appended at end of image and copied to DDR along
  71  * with U-Boot image.
  72  */
  73 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  74 #endif /* ifdef CONFIG_NXP_ESBC */
  75
  76 #define CONFIG_SPL_MAX_SIZE             0x1a000
  77 #define CONFIG_SPL_STACK                0x1001d000
  78 #define CONFIG_SPL_PAD_TO               0x1c000
  79
  80 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  81                 CONFIG_SYS_MONITOR_LEN)
  82 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  83 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  84 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  85
  86 #ifdef CONFIG_U_BOOT_HDR_SIZE
  87 /*
  88  * HDR would be appended at end of image and copied to DDR along
  89  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  90  * size increases then increase this size in case of secure boot as
  91  * it uses raw u-boot image instead of fit image.
  92  */
  93 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  94 #else
  95 #define CONFIG_SYS_MONITOR_LEN          0x100000
  96 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  97 #endif
  98
  99 #define PHYS_SDRAM                      0x80000000
 100 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 101
 102 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 103 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 104
 105 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 106
 107 /*
 108  * IFC Definitions
 109  */
 110 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 111 #define CONFIG_FSL_IFC
 112 #define CONFIG_SYS_FLASH_BASE           0x60000000
 113 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 114
 115 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 116 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 117                                 CSPR_PORT_SIZE_16 | \
 118                                 CSPR_MSEL_NOR | \
 119                                 CSPR_V)
 120 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 121
 122 /* NOR Flash Timing Params */
 123 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 124                                         CSOR_NOR_TRHZ_80)
 125 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 126                                         FTIM0_NOR_TEADC(0x5) | \
 127                                         FTIM0_NOR_TAVDS(0x0) | \
 128                                         FTIM0_NOR_TEAHC(0x5))
 129 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 130                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 131                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 132 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 133                                         FTIM2_NOR_TCH(0x4) | \
 134                                         FTIM2_NOR_TWP(0x1c) | \
 135                                         FTIM2_NOR_TWPH(0x0e))
 136 #define CONFIG_SYS_NOR_FTIM3            0
 137
 138 #define CONFIG_SYS_FLASH_QUIET_TEST
 139 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 140
 141 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 142 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 143 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 144 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 145
 146 #define CONFIG_SYS_FLASH_EMPTY_INFO
 147 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 148
 149 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 150 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 151 #endif
 152
 153 /* CPLD */
 154
 155 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 156 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 157
 158 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 159 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 160                                         CSPR_PORT_SIZE_8 | \
 161                                         CSPR_MSEL_GPCM | \
 162                                         CSPR_V)
 163 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 164 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 165                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 166                                         CSOR_NOR_TRHZ_80)
 167
 168 /* CPLD Timing parameters for IFC GPCM */
 169 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 170                                         FTIM0_GPCM_TEADC(0xf) | \
 171                                         FTIM0_GPCM_TEAHC(0xf))
 172 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 173                                         FTIM1_GPCM_TRAD(0x3f))
 174 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 175                                         FTIM2_GPCM_TCH(0xf) | \
 176                                         FTIM2_GPCM_TWP(0xff))
 177 #define CONFIG_SYS_FPGA_FTIM3           0x0
 178 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 179 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 180 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 181 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 182 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 183 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 184 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 185 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 186 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 187 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 188 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 189 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 190 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 191 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 192 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 193 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 194
 195 /*
 196  * Serial Port
 197  */
 198 #ifdef CONFIG_LPUART
 199 #define CONFIG_LPUART_32B_REG
 200 #else
 201 #define CONFIG_SYS_NS16550_SERIAL
 202 #ifndef CONFIG_DM_SERIAL
 203 #define CONFIG_SYS_NS16550_REG_SIZE     1
 204 #endif
 205 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 206 #endif
 207
 208 /*
 209  * I2C
 210  */
 211 #ifndef CONFIG_DM_I2C
 212 #define CONFIG_SYS_I2C
 213 #else
 214 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 215 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
 216 #endif
 217 #define CONFIG_SYS_I2C_MXC
 218 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 219 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 220 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 221
 222 /* EEPROM */
 223 #define CONFIG_ID_EEPROM
 224 #define CONFIG_SYS_I2C_EEPROM_NXID
 225 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 226 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 227 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 228 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 230
 231 /*
 232  * MMC
 233  */
 234
 235 /*
 236  * Video
 237  */
 238 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 239 #define CONFIG_VIDEO_LOGO
 240 #define CONFIG_VIDEO_BMP_LOGO
 241
 242 #define CONFIG_FSL_DCU_SII9022A
 243 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 244 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 245 #endif
 246
 247 /*
 248  * eTSEC
 249  */
 250
 251 #ifdef CONFIG_TSEC_ENET
 252 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 253 #endif
 254
 255 /* PCIe */
 256 #define CONFIG_PCIE1            /* PCIE controller 1 */
 257 #define CONFIG_PCIE2            /* PCIE controller 2 */
 258
 259 #ifdef CONFIG_PCI
 260 #define CONFIG_PCI_SCAN_SHOW
 261 #endif
 262
 263 #define CONFIG_CMDLINE_TAG
 264
 265 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 266 #define CONFIG_LAYERSCAPE_NS_ACCESS
 267 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 268 #define COUNTER_FREQUENCY               12500000
 269
 270 #define CONFIG_HWCONFIG
 271 #define HWCONFIG_BUFFER_SIZE            256
 272
 273 #define CONFIG_FSL_DEVICE_DISABLE
 274
 275 #define BOOT_TARGET_DEVICES(func) \
 276         func(MMC, mmc, 0) \
 277         func(USB, usb, 0) \
 278         func(DHCP, dhcp, na)
 279 #include <config_distro_bootcmd.h>
 280
 281 #ifdef CONFIG_LPUART
 282 #define CONFIG_EXTRA_ENV_SETTINGS       \
 283         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 284                 "cma=64M@0x0-0xb0000000\0" \
 285         "initrd_high=0xffffffff\0"      \
 286         "fdt_addr=0x64f00000\0"         \
 287         "kernel_addr=0x65000000\0"      \
 288         "scriptaddr=0x80000000\0"       \
 289         "scripthdraddr=0x80080000\0"    \
 290         "fdtheader_addr_r=0x80100000\0" \
 291         "kernelheader_addr_r=0x80200000\0"      \
 292         "kernel_addr_r=0x81000000\0"    \
 293         "fdt_addr_r=0x90000000\0"       \
 294         "ramdisk_addr_r=0xa0000000\0"   \
 295         "load_addr=0xa0000000\0"        \
 296         "kernel_size=0x2800000\0"       \
 297         "kernel_addr_sd=0x8000\0"       \
 298         "kernel_size_sd=0x14000\0"      \
 299         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 300         BOOTENV                         \
 301         "boot_scripts=ls1021atwr_boot.scr\0"    \
 302         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 303                 "scan_dev_for_boot_part="       \
 304                         "part list ${devtype} ${devnum} devplist; "     \
 305                         "env exists devplist || setenv devplist 1; "    \
 306                         "for distro_bootpart in ${devplist}; do "       \
 307                         "if fstype ${devtype} "                         \
 308                                 "${devnum}:${distro_bootpart} "         \
 309                                 "bootfstype; then "                     \
 310                                 "run scan_dev_for_boot; "               \
 311                         "fi; "                  \
 312                 "done\0"                        \
 313         "scan_dev_for_boot="                              \
 314                 "echo Scanning ${devtype} "               \
 315                                 "${devnum}:${distro_bootpart}...; "  \
 316                 "for prefix in ${boot_prefixes}; do "     \
 317                         "run scan_dev_for_scripts; "      \
 318                 "done;"                                   \
 319                 "\0"                                      \
 320         "boot_a_script="                                  \
 321                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 322                         "${scriptaddr} ${prefix}${script}; "    \
 323                 "env exists secureboot && load ${devtype} "     \
 324                         "${devnum}:${distro_bootpart} "         \
 325                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 326                         "env exists secureboot "        \
 327                         "&& esbc_validate ${scripthdraddr};"    \
 328                 "source ${scriptaddr}\0"          \
 329         "installer=load mmc 0:2 $load_addr "    \
 330                 "/flex_installer_arm32.itb; "           \
 331                 "bootm $load_addr#ls1021atwr\0" \
 332         "qspi_bootcmd=echo Trying load from qspi..;"    \
 333                 "sf probe && sf read $load_addr "       \
 334                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 335         "nor_bootcmd=echo Trying load from nor..;"      \
 336                 "cp.b $kernel_addr $load_addr "         \
 337                 "$kernel_size && bootm $load_addr#$board\0"
 338 #else
 339 #define CONFIG_EXTRA_ENV_SETTINGS       \
 340         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 341                 "cma=64M@0x0-0xb0000000\0" \
 342         "initrd_high=0xffffffff\0"      \
 343         "fdt_addr=0x64f00000\0"         \
 344         "kernel_addr=0x61000000\0"      \
 345         "kernelheader_addr=0x60800000\0"        \
 346         "scriptaddr=0x80000000\0"       \
 347         "scripthdraddr=0x80080000\0"    \
 348         "fdtheader_addr_r=0x80100000\0" \
 349         "kernelheader_addr_r=0x80200000\0"      \
 350         "kernel_addr_r=0x81000000\0"    \
 351         "kernelheader_size=0x40000\0"   \
 352         "fdt_addr_r=0x90000000\0"       \
 353         "ramdisk_addr_r=0xa0000000\0"   \
 354         "load_addr=0xa0000000\0"        \
 355         "kernel_size=0x2800000\0"       \
 356         "kernel_addr_sd=0x8000\0"       \
 357         "kernel_size_sd=0x14000\0"      \
 358         "kernelhdr_addr_sd=0x4000\0"            \
 359         "kernelhdr_size_sd=0x10\0"              \
 360         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 361         BOOTENV                         \
 362         "boot_scripts=ls1021atwr_boot.scr\0"    \
 363         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 364                 "scan_dev_for_boot_part="       \
 365                         "part list ${devtype} ${devnum} devplist; "     \
 366                         "env exists devplist || setenv devplist 1; "    \
 367                         "for distro_bootpart in ${devplist}; do "       \
 368                         "if fstype ${devtype} "                         \
 369                                 "${devnum}:${distro_bootpart} "         \
 370                                 "bootfstype; then "                     \
 371                                 "run scan_dev_for_boot; "               \
 372                         "fi; "                  \
 373                 "done\0"                        \
 374         "scan_dev_for_boot="                              \
 375                 "echo Scanning ${devtype} "               \
 376                                 "${devnum}:${distro_bootpart}...; "  \
 377                 "for prefix in ${boot_prefixes}; do "     \
 378                         "run scan_dev_for_scripts; "      \
 379                 "done;"                                   \
 380                 "\0"                                      \
 381         "boot_a_script="                                  \
 382                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 383                         "${scriptaddr} ${prefix}${script}; "    \
 384                 "env exists secureboot && load ${devtype} "     \
 385                         "${devnum}:${distro_bootpart} "         \
 386                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 387                         "&& esbc_validate ${scripthdraddr};"    \
 388                 "source ${scriptaddr}\0"          \
 389         "qspi_bootcmd=echo Trying load from qspi..;"    \
 390                 "sf probe && sf read $load_addr "       \
 391                 "$kernel_addr $kernel_size; env exists secureboot "     \
 392                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 393                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 394                 "bootm $load_addr#$board\0" \
 395         "nor_bootcmd=echo Trying load from nor..;"      \
 396                 "cp.b $kernel_addr $load_addr "         \
 397                 "$kernel_size; env exists secureboot "  \
 398                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 399                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 400                 "bootm $load_addr#$board\0"     \
 401         "sd_bootcmd=echo Trying load from SD ..;"       \
 402                 "mmcinfo && mmc read $load_addr "       \
 403                 "$kernel_addr_sd $kernel_size_sd && "   \
 404                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 405                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 406                 " && esbc_validate ${kernelheader_addr_r};"     \
 407                 "bootm $load_addr#$board\0"
 408 #endif
 409
 410 #undef CONFIG_BOOTCOMMAND
 411 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 412 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 413                            "env exists secureboot && esbc_halt"
 414 #elif defined(CONFIG_SD_BOOT)
 415 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 416                            "env exists secureboot && esbc_halt;"
 417 #else
 418 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 419                            "env exists secureboot && esbc_halt;"
 420 #endif
 421
 422 /*
 423  * Miscellaneous configurable options
 424  */
 425 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 426
 427 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 428
 429 #define CONFIG_LS102XA_STREAM_ID
 430
 431 #define CONFIG_SYS_INIT_SP_OFFSET \
 432         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 433 #define CONFIG_SYS_INIT_SP_ADDR \
 434         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 435
 436 #ifdef CONFIG_SPL_BUILD
 437 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 438 #undef CONFIG_DM_I2C
 439 #else
 440 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 441 #endif
 442
 443 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 444
 445 /*
 446  * Environment
 447  */
 448
 449 #include <asm/fsl_secure_boot.h>
 450 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 451
 452 #endif