include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #define CONFIG_ARMV7_PSCI_1_0
  10
  11 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  12
  13 #define CONFIG_SYS_FSL_CLK
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT
  16 #define CONFIG_DEEP_SLEEP
  17
  18 /*
  19  * Size of malloc() pool
  20  */
  21 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  22
  23 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  24 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  25
  26 #define CONFIG_SYS_CLK_FREQ             100000000
  27 #define CONFIG_DDR_CLK_FREQ             100000000
  28
  29 #define DDR_SDRAM_CFG                   0x470c0008
  30 #define DDR_CS0_BNDS                    0x008000bf
  31 #define DDR_CS0_CONFIG                  0x80014302
  32 #define DDR_TIMING_CFG_0                0x50550004
  33 #define DDR_TIMING_CFG_1                0xbcb38c56
  34 #define DDR_TIMING_CFG_2                0x0040d120
  35 #define DDR_TIMING_CFG_3                0x010e1000
  36 #define DDR_TIMING_CFG_4                0x00000001
  37 #define DDR_TIMING_CFG_5                0x03401400
  38 #define DDR_SDRAM_CFG_2                 0x00401010
  39 #define DDR_SDRAM_MODE                  0x00061c60
  40 #define DDR_SDRAM_MODE_2                0x00180000
  41 #define DDR_SDRAM_INTERVAL              0x18600618
  42 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  43 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  44 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  45 #define DDR_DDR_CDR1                    0x80040000
  46 #define DDR_DDR_CDR2                    0x00000001
  47 #define DDR_SDRAM_CLK_CNTL              0x02000000
  48 #define DDR_DDR_ZQ_CNTL                 0x89080600
  49 #define DDR_CS0_CONFIG_2                0
  50 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  51 #define SDRAM_CFG2_D_INIT               0x00000010
  52 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  53 #define SDRAM_CFG2_FRC_SR               0x80000000
  54 #define SDRAM_CFG_BI                    0x00000001
  55
  56 #ifdef CONFIG_RAMBOOT_PBL
  57 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  58 #endif
  59
  60 #ifdef CONFIG_SD_BOOT
  61 #ifdef CONFIG_SD_BOOT_QSPI
  62 #define CONFIG_SYS_FSL_PBL_RCW  \
  63         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  64 #else
  65 #define CONFIG_SYS_FSL_PBL_RCW  \
  66         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
  67 #endif
  68
  69 #ifdef CONFIG_SECURE_BOOT
  70 /*
  71  * HDR would be appended at end of image and copied to DDR along
  72  * with U-Boot image.
  73  */
  74 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  75 #endif /* ifdef CONFIG_SECURE_BOOT */
  76
  77 #define CONFIG_SPL_TEXT_BASE            0x10000000
  78 #define CONFIG_SPL_MAX_SIZE             0x1a000
  79 #define CONFIG_SPL_STACK                0x1001d000
  80 #define CONFIG_SPL_PAD_TO               0x1c000
  81
  82 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  83                 CONFIG_SYS_MONITOR_LEN)
  84 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  85 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  86 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  87
  88 #ifdef CONFIG_U_BOOT_HDR_SIZE
  89 /*
  90  * HDR would be appended at end of image and copied to DDR along
  91  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  92  * size increases then increase this size in case of secure boot as
  93  * it uses raw u-boot image instead of fit image.
  94  */
  95 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  96 #else
  97 #define CONFIG_SYS_MONITOR_LEN          0x100000
  98 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  99 #endif
 100
 101 #define PHYS_SDRAM                      0x80000000
 102 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 103
 104 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 105 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 106
 107 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 108         !defined(CONFIG_QSPI_BOOT)
 109 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 110 #endif
 111
 112 /*
 113  * IFC Definitions
 114  */
 115 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 116 #define CONFIG_FSL_IFC
 117 #define CONFIG_SYS_FLASH_BASE           0x60000000
 118 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 119
 120 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 121 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 122                                 CSPR_PORT_SIZE_16 | \
 123                                 CSPR_MSEL_NOR | \
 124                                 CSPR_V)
 125 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 126
 127 /* NOR Flash Timing Params */
 128 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 129                                         CSOR_NOR_TRHZ_80)
 130 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 131                                         FTIM0_NOR_TEADC(0x5) | \
 132                                         FTIM0_NOR_TAVDS(0x0) | \
 133                                         FTIM0_NOR_TEAHC(0x5))
 134 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 135                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 136                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 137 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 138                                         FTIM2_NOR_TCH(0x4) | \
 139                                         FTIM2_NOR_TWP(0x1c) | \
 140                                         FTIM2_NOR_TWPH(0x0e))
 141 #define CONFIG_SYS_NOR_FTIM3            0
 142
 143 #define CONFIG_SYS_FLASH_QUIET_TEST
 144 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 145
 146 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 147 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 148 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 149 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 150
 151 #define CONFIG_SYS_FLASH_EMPTY_INFO
 152 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 153
 154 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 155 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 156 #endif
 157
 158 /* CPLD */
 159
 160 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 161 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 162
 163 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 164 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 165                                         CSPR_PORT_SIZE_8 | \
 166                                         CSPR_MSEL_GPCM | \
 167                                         CSPR_V)
 168 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 169 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 170                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 171                                         CSOR_NOR_TRHZ_80)
 172
 173 /* CPLD Timing parameters for IFC GPCM */
 174 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 175                                         FTIM0_GPCM_TEADC(0xf) | \
 176                                         FTIM0_GPCM_TEAHC(0xf))
 177 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 178                                         FTIM1_GPCM_TRAD(0x3f))
 179 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 180                                         FTIM2_GPCM_TCH(0xf) | \
 181                                         FTIM2_GPCM_TWP(0xff))
 182 #define CONFIG_SYS_FPGA_FTIM3           0x0
 183 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 184 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 185 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 186 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 187 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 188 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 189 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 190 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 191 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 192 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 193 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 194 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 195 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 196 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 197 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 198 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 199
 200 /*
 201  * Serial Port
 202  */
 203 #ifdef CONFIG_LPUART
 204 #define CONFIG_LPUART_32B_REG
 205 #else
 206 #define CONFIG_SYS_NS16550_SERIAL
 207 #ifndef CONFIG_DM_SERIAL
 208 #define CONFIG_SYS_NS16550_REG_SIZE     1
 209 #endif
 210 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 211 #endif
 212
 213 /*
 214  * I2C
 215  */
 216 #define CONFIG_SYS_I2C
 217 #define CONFIG_SYS_I2C_MXC
 218 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 219 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 220 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 221
 222 /* EEPROM */
 223 #define CONFIG_ID_EEPROM
 224 #define CONFIG_SYS_I2C_EEPROM_NXID
 225 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 226 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 227 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 228 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 230
 231 /*
 232  * MMC
 233  */
 234
 235 /* SPI */
 236 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 237 /* QSPI */
 238 #define QSPI0_AMBA_BASE                 0x40000000
 239 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 240 #define FSL_QSPI_FLASH_NUM              2
 241
 242 /* DSPI */
 243 #endif
 244
 245 /* DM SPI */
 246 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 247 #define CONFIG_DM_SPI_FLASH
 248 #endif
 249
 250 /*
 251  * Video
 252  */
 253 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 254 #define CONFIG_VIDEO_LOGO
 255 #define CONFIG_VIDEO_BMP_LOGO
 256
 257 #define CONFIG_FSL_DCU_SII9022A
 258 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 259 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 260 #endif
 261
 262 /*
 263  * eTSEC
 264  */
 265
 266 #ifdef CONFIG_TSEC_ENET
 267 #define CONFIG_MII_DEFAULT_TSEC         1
 268 #define CONFIG_TSEC1                    1
 269 #define CONFIG_TSEC1_NAME               "eTSEC1"
 270 #define CONFIG_TSEC2                    1
 271 #define CONFIG_TSEC2_NAME               "eTSEC2"
 272 #define CONFIG_TSEC3                    1
 273 #define CONFIG_TSEC3_NAME               "eTSEC3"
 274
 275 #define TSEC1_PHY_ADDR                  2
 276 #define TSEC2_PHY_ADDR                  0
 277 #define TSEC3_PHY_ADDR                  1
 278
 279 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 280 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 281 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 282
 283 #define TSEC1_PHYIDX                    0
 284 #define TSEC2_PHYIDX                    0
 285 #define TSEC3_PHYIDX                    0
 286
 287 #define CONFIG_ETHPRIME                 "eTSEC1"
 288
 289 #define CONFIG_PHY_ATHEROS
 290
 291 #define CONFIG_HAS_ETH0
 292 #define CONFIG_HAS_ETH1
 293 #define CONFIG_HAS_ETH2
 294 #endif
 295
 296 /* PCIe */
 297 #define CONFIG_PCIE1            /* PCIE controller 1 */
 298 #define CONFIG_PCIE2            /* PCIE controller 2 */
 299
 300 #ifdef CONFIG_PCI
 301 #define CONFIG_PCI_SCAN_SHOW
 302 #endif
 303
 304 #define CONFIG_CMDLINE_TAG
 305
 306 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 307 #define CONFIG_LAYERSCAPE_NS_ACCESS
 308 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 309 #define COUNTER_FREQUENCY               12500000
 310
 311 #define CONFIG_HWCONFIG
 312 #define HWCONFIG_BUFFER_SIZE            256
 313
 314 #define CONFIG_FSL_DEVICE_DISABLE
 315
 316 #define BOOT_TARGET_DEVICES(func) \
 317         func(MMC, mmc, 0) \
 318         func(USB, usb, 0)
 319 #include <config_distro_bootcmd.h>
 320
 321 #ifdef CONFIG_LPUART
 322 #define CONFIG_EXTRA_ENV_SETTINGS       \
 323         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 324         "initrd_high=0xffffffff\0"      \
 325         "fdt_high=0xffffffff\0"         \
 326         "fdt_addr=0x64f00000\0"         \
 327         "kernel_addr=0x65000000\0"      \
 328         "scriptaddr=0x80000000\0"       \
 329         "scripthdraddr=0x80080000\0"    \
 330         "fdtheader_addr_r=0x80100000\0" \
 331         "kernelheader_addr_r=0x80200000\0"      \
 332         "kernel_addr_r=0x81000000\0"    \
 333         "fdt_addr_r=0x90000000\0"       \
 334         "ramdisk_addr_r=0xa0000000\0"   \
 335         "load_addr=0xa0000000\0"        \
 336         "kernel_size=0x2800000\0"       \
 337         "kernel_addr_sd=0x8000\0"       \
 338         "kernel_size_sd=0x14000\0"      \
 339         BOOTENV                         \
 340         "boot_scripts=ls1021atwr_boot.scr\0"    \
 341         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 342                 "scan_dev_for_boot_part="       \
 343                         "part list ${devtype} ${devnum} devplist; "     \
 344                         "env exists devplist || setenv devplist 1; "    \
 345                         "for distro_bootpart in ${devplist}; do "       \
 346                         "if fstype ${devtype} "                         \
 347                                 "${devnum}:${distro_bootpart} "         \
 348                                 "bootfstype; then "                     \
 349                                 "run scan_dev_for_boot; "               \
 350                         "fi; "                  \
 351                 "done\0"                        \
 352         "scan_dev_for_boot="                              \
 353                 "echo Scanning ${devtype} "               \
 354                                 "${devnum}:${distro_bootpart}...; "  \
 355                 "for prefix in ${boot_prefixes}; do "     \
 356                         "run scan_dev_for_scripts; "      \
 357                 "done;"                                   \
 358                 "\0"                                      \
 359         "boot_a_script="                                  \
 360                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 361                         "${scriptaddr} ${prefix}${script}; "    \
 362                 "env exists secureboot && load ${devtype} "     \
 363                         "${devnum}:${distro_bootpart} "         \
 364                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 365                         "&& esbc_validate ${scripthdraddr};"    \
 366                 "source ${scriptaddr}\0"          \
 367         "installer=load mmc 0:2 $load_addr "    \
 368                 "/flex_installer_arm32.itb; "           \
 369                 "bootm $load_addr#ls1021atwr\0" \
 370         "qspi_bootcmd=echo Trying load from qspi..;"    \
 371                 "sf probe && sf read $load_addr "       \
 372                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 373         "nor_bootcmd=echo Trying load from nor..;"      \
 374                 "cp.b $kernel_addr $load_addr "         \
 375                 "$kernel_size && bootm $load_addr#$board\0"
 376 #else
 377 #define CONFIG_EXTRA_ENV_SETTINGS       \
 378         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 379         "initrd_high=0xffffffff\0"      \
 380         "fdt_high=0xffffffff\0"         \
 381         "fdt_addr=0x64f00000\0"         \
 382         "kernel_addr=0x61000000\0"      \
 383         "kernelheader_addr=0x60800000\0"        \
 384         "scriptaddr=0x80000000\0"       \
 385         "scripthdraddr=0x80080000\0"    \
 386         "fdtheader_addr_r=0x80100000\0" \
 387         "kernelheader_addr_r=0x80200000\0"      \
 388         "kernel_addr_r=0x81000000\0"    \
 389         "kernelheader_size=0x40000\0"   \
 390         "fdt_addr_r=0x90000000\0"       \
 391         "ramdisk_addr_r=0xa0000000\0"   \
 392         "load_addr=0xa0000000\0"        \
 393         "kernel_size=0x2800000\0"       \
 394         "kernel_addr_sd=0x8000\0"       \
 395         "kernel_size_sd=0x14000\0"      \
 396         "kernelhdr_addr_sd=0x4000\0"            \
 397         "kernelhdr_size_sd=0x10\0"              \
 398         BOOTENV                         \
 399         "boot_scripts=ls1021atwr_boot.scr\0"    \
 400         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 401                 "scan_dev_for_boot_part="       \
 402                         "part list ${devtype} ${devnum} devplist; "     \
 403                         "env exists devplist || setenv devplist 1; "    \
 404                         "for distro_bootpart in ${devplist}; do "       \
 405                         "if fstype ${devtype} "                         \
 406                                 "${devnum}:${distro_bootpart} "         \
 407                                 "bootfstype; then "                     \
 408                                 "run scan_dev_for_boot; "               \
 409                         "fi; "                  \
 410                 "done\0"                        \
 411         "scan_dev_for_boot="                              \
 412                 "echo Scanning ${devtype} "               \
 413                                 "${devnum}:${distro_bootpart}...; "  \
 414                 "for prefix in ${boot_prefixes}; do "     \
 415                         "run scan_dev_for_scripts; "      \
 416                 "done;"                                   \
 417                 "\0"                                      \
 418         "boot_a_script="                                  \
 419                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 420                         "${scriptaddr} ${prefix}${script}; "    \
 421                 "env exists secureboot && load ${devtype} "     \
 422                         "${devnum}:${distro_bootpart} "         \
 423                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 424                         "&& esbc_validate ${scripthdraddr};"    \
 425                 "source ${scriptaddr}\0"          \
 426         "qspi_bootcmd=echo Trying load from qspi..;"    \
 427                 "sf probe && sf read $load_addr "       \
 428                 "$kernel_addr $kernel_size; env exists secureboot "     \
 429                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 430                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 431                 "bootm $load_addr#$board\0" \
 432         "nor_bootcmd=echo Trying load from nor..;"      \
 433                 "cp.b $kernel_addr $load_addr "         \
 434                 "$kernel_size; env exists secureboot "  \
 435                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 436                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 437                 "bootm $load_addr#$board\0"     \
 438         "sd_bootcmd=echo Trying load from SD ..;"       \
 439                 "mmcinfo && mmc read $load_addr "       \
 440                 "$kernel_addr_sd $kernel_size_sd && "   \
 441                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 442                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 443                 " && esbc_validate ${kernelheader_addr_r};"     \
 444                 "bootm $load_addr#$board\0"
 445 #endif
 446
 447 #undef CONFIG_BOOTCOMMAND
 448 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 449 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd"       \
 450                            "env exists secureboot && esbc_halt"
 451 #elif defined(CONFIG_SD_BOOT)
 452 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 453                            "env exists secureboot && esbc_halt;"
 454 #else
 455 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 456                            "env exists secureboot && esbc_halt;"
 457 #endif
 458
 459 /*
 460  * Miscellaneous configurable options
 461  */
 462
 463 #define CONFIG_SYS_MEMTEST_START        0x80000000
 464 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 465
 466 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 467
 468 #define CONFIG_LS102XA_STREAM_ID
 469
 470 #define CONFIG_SYS_INIT_SP_OFFSET \
 471         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 472 #define CONFIG_SYS_INIT_SP_ADDR \
 473         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 474
 475 #ifdef CONFIG_SPL_BUILD
 476 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 477 #else
 478 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 479 #endif
 480
 481 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 482
 483 /*
 484  * Environment
 485  */
 486 #define CONFIG_ENV_OVERWRITE
 487
 488 #if defined(CONFIG_SD_BOOT)
 489 #define CONFIG_ENV_OFFSET               0x300000
 490 #define CONFIG_SYS_MMC_ENV_DEV          0
 491 #define CONFIG_ENV_SIZE                 0x20000
 492 #elif defined(CONFIG_QSPI_BOOT)
 493 #define CONFIG_ENV_SIZE                 0x2000
 494 #define CONFIG_ENV_OFFSET               0x300000
 495 #define CONFIG_ENV_SECT_SIZE            0x10000
 496 #else
 497 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
 498 #define CONFIG_ENV_SIZE                 0x20000
 499 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 500 #endif
 501
 502 #include <asm/fsl_secure_boot.h>
 503 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 504
 505 #endif