include/configs/ls1021atwr.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_LS102XA
  11
  12 #define CONFIG_ARMV7_PSCI_1_0
  13
  14 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  15
  16 #define CONFIG_SYS_FSL_CLK
  17
  18 #define CONFIG_SKIP_LOWLEVEL_INIT
  19 #define CONFIG_DEEP_SLEEP
  20
  21 /*
  22  * Size of malloc() pool
  23  */
  24 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  25
  26 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  27 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  28
  29 /*
  30  * USB
  31  */
  32
  33 /*
  34  * EHCI Support - disbaled by default as
  35  * there is no signal coming out of soc on
  36  * this board for this controller. However,
  37  * the silicon still has this controller,
  38  * and anyone can use this controller by
  39  * taking signals out on their board.
  40  */
  41
  42 /*#define CONFIG_HAS_FSL_DR_USB*/
  43
  44 #ifdef CONFIG_HAS_FSL_DR_USB
  45 #define CONFIG_USB_EHCI
  46 #define CONFIG_USB_EHCI_FSL
  47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  48 #endif
  49
  50 /* XHCI Support - enabled by default */
  51 #define CONFIG_HAS_FSL_XHCI_USB
  52
  53 #ifdef CONFIG_HAS_FSL_XHCI_USB
  54 #define CONFIG_USB_XHCI_FSL
  55 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
  56 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
  57 #endif
  58
  59 /*
  60  * Generic Timer Definitions
  61  */
  62 #define GENERIC_TIMER_CLK               12500000
  63
  64 #define CONFIG_SYS_CLK_FREQ             100000000
  65 #define CONFIG_DDR_CLK_FREQ             100000000
  66
  67 #define DDR_SDRAM_CFG                   0x470c0008
  68 #define DDR_CS0_BNDS                    0x008000bf
  69 #define DDR_CS0_CONFIG                  0x80014302
  70 #define DDR_TIMING_CFG_0                0x50550004
  71 #define DDR_TIMING_CFG_1                0xbcb38c56
  72 #define DDR_TIMING_CFG_2                0x0040d120
  73 #define DDR_TIMING_CFG_3                0x010e1000
  74 #define DDR_TIMING_CFG_4                0x00000001
  75 #define DDR_TIMING_CFG_5                0x03401400
  76 #define DDR_SDRAM_CFG_2                 0x00401010
  77 #define DDR_SDRAM_MODE                  0x00061c60
  78 #define DDR_SDRAM_MODE_2                0x00180000
  79 #define DDR_SDRAM_INTERVAL              0x18600618
  80 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  81 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  82 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  83 #define DDR_DDR_CDR1                    0x80040000
  84 #define DDR_DDR_CDR2                    0x00000001
  85 #define DDR_SDRAM_CLK_CNTL              0x02000000
  86 #define DDR_DDR_ZQ_CNTL                 0x89080600
  87 #define DDR_CS0_CONFIG_2                0
  88 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  89 #define SDRAM_CFG2_D_INIT               0x00000010
  90 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  91 #define SDRAM_CFG2_FRC_SR               0x80000000
  92 #define SDRAM_CFG_BI                    0x00000001
  93
  94 #ifdef CONFIG_RAMBOOT_PBL
  95 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  96 #endif
  97
  98 #ifdef CONFIG_SD_BOOT
  99 #ifdef CONFIG_SD_BOOT_QSPI
 100 #define CONFIG_SYS_FSL_PBL_RCW  \
 101         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
 102 #else
 103 #define CONFIG_SYS_FSL_PBL_RCW  \
 104         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 105 #endif
 106 #define CONFIG_SPL_FRAMEWORK
 107 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
 108
 109 #ifdef CONFIG_SECURE_BOOT
 110 /*
 111  * HDR would be appended at end of image and copied to DDR along
 112  * with U-Boot image.
 113  */
 114 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
 115 #endif /* ifdef CONFIG_SECURE_BOOT */
 116
 117 #define CONFIG_SPL_TEXT_BASE            0x10000000
 118 #define CONFIG_SPL_MAX_SIZE             0x1a000
 119 #define CONFIG_SPL_STACK                0x1001d000
 120 #define CONFIG_SPL_PAD_TO               0x1c000
 121 #define CONFIG_SYS_TEXT_BASE            0x82000000
 122
 123 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
 124                 CONFIG_SYS_MONITOR_LEN)
 125 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 126 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 127 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 128
 129 #ifdef CONFIG_U_BOOT_HDR_SIZE
 130 /*
 131  * HDR would be appended at end of image and copied to DDR along
 132  * with U-Boot image. Here u-boot max. size is 512K. So if binary
 133  * size increases then increase this size in case of secure boot as
 134  * it uses raw u-boot image instead of fit image.
 135  */
 136 #define CONFIG_SYS_MONITOR_LEN          (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
 137 #else
 138 #define CONFIG_SYS_MONITOR_LEN          0x80000
 139 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 140 #endif
 141
 142 #ifdef CONFIG_QSPI_BOOT
 143 #define CONFIG_SYS_TEXT_BASE            0x40010000
 144 #endif
 145
 146 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 147 #define CONFIG_SYS_NO_FLASH
 148 #endif
 149
 150 #ifndef CONFIG_SYS_TEXT_BASE
 151 #define CONFIG_SYS_TEXT_BASE            0x60100000
 152 #endif
 153
 154 #define CONFIG_NR_DRAM_BANKS            1
 155 #define PHYS_SDRAM                      0x80000000
 156 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 157
 158 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 159 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 160
 161 #define CONFIG_FSL_CAAM                 /* Enable CAAM */
 162
 163 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 164         !defined(CONFIG_QSPI_BOOT)
 165 #define CONFIG_U_QE
 166 #endif
 167
 168 /*
 169  * IFC Definitions
 170  */
 171 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 172 #define CONFIG_FSL_IFC
 173 #define CONFIG_SYS_FLASH_BASE           0x60000000
 174 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 175
 176 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 177 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 178                                 CSPR_PORT_SIZE_16 | \
 179                                 CSPR_MSEL_NOR | \
 180                                 CSPR_V)
 181 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 182
 183 /* NOR Flash Timing Params */
 184 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 185                                         CSOR_NOR_TRHZ_80)
 186 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 187                                         FTIM0_NOR_TEADC(0x5) | \
 188                                         FTIM0_NOR_TAVDS(0x0) | \
 189                                         FTIM0_NOR_TEAHC(0x5))
 190 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 191                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 192                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 193 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 194                                         FTIM2_NOR_TCH(0x4) | \
 195                                         FTIM2_NOR_TWP(0x1c) | \
 196                                         FTIM2_NOR_TWPH(0x0e))
 197 #define CONFIG_SYS_NOR_FTIM3            0
 198
 199 #define CONFIG_FLASH_CFI_DRIVER
 200 #define CONFIG_SYS_FLASH_CFI
 201 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 202 #define CONFIG_SYS_FLASH_QUIET_TEST
 203 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 204
 205 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 206 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 207 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 208 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 209
 210 #define CONFIG_SYS_FLASH_EMPTY_INFO
 211 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 212
 213 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 214 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 215 #endif
 216
 217 /* CPLD */
 218
 219 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 220 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 221
 222 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 223 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 224                                         CSPR_PORT_SIZE_8 | \
 225                                         CSPR_MSEL_GPCM | \
 226                                         CSPR_V)
 227 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 228 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 229                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 230                                         CSOR_NOR_TRHZ_80)
 231
 232 /* CPLD Timing parameters for IFC GPCM */
 233 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 234                                         FTIM0_GPCM_TEADC(0xf) | \
 235                                         FTIM0_GPCM_TEAHC(0xf))
 236 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 237                                         FTIM1_GPCM_TRAD(0x3f))
 238 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 239                                         FTIM2_GPCM_TCH(0xf) | \
 240                                         FTIM2_GPCM_TWP(0xff))
 241 #define CONFIG_SYS_FPGA_FTIM3           0x0
 242 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 243 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 244 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 245 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 246 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 247 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 248 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 249 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 250 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 251 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 252 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 253 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 254 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 255 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 256 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 257 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 258
 259 /*
 260  * Serial Port
 261  */
 262 #ifdef CONFIG_LPUART
 263 #define CONFIG_LPUART_32B_REG
 264 #else
 265 #define CONFIG_CONS_INDEX               1
 266 #define CONFIG_SYS_NS16550_SERIAL
 267 #ifndef CONFIG_DM_SERIAL
 268 #define CONFIG_SYS_NS16550_REG_SIZE     1
 269 #endif
 270 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 271 #endif
 272
 273 #define CONFIG_BAUDRATE                 115200
 274
 275 /*
 276  * I2C
 277  */
 278 #define CONFIG_SYS_I2C
 279 #define CONFIG_SYS_I2C_MXC
 280 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 281 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 282 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 283
 284 /* EEPROM */
 285 #define CONFIG_ID_EEPROM
 286 #define CONFIG_SYS_I2C_EEPROM_NXID
 287 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 288 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 289 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 290 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 291 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 292
 293 /*
 294  * MMC
 295  */
 296 #define CONFIG_FSL_ESDHC
 297
 298 /* SPI */
 299 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 300 /* QSPI */
 301 #define QSPI0_AMBA_BASE                 0x40000000
 302 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 303 #define FSL_QSPI_FLASH_NUM              2
 304
 305 /* DSPI */
 306 #endif
 307
 308 /* DM SPI */
 309 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 310 #define CONFIG_DM_SPI_FLASH
 311 #endif
 312
 313 /*
 314  * Video
 315  */
 316 #define CONFIG_FSL_DCU_FB
 317
 318 #ifdef CONFIG_FSL_DCU_FB
 319 #define CONFIG_CMD_BMP
 320 #define CONFIG_VIDEO_LOGO
 321 #define CONFIG_VIDEO_BMP_LOGO
 322
 323 #define CONFIG_FSL_DCU_SII9022A
 324 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 325 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 326 #endif
 327
 328 /*
 329  * eTSEC
 330  */
 331 #define CONFIG_TSEC_ENET
 332
 333 #ifdef CONFIG_TSEC_ENET
 334 #define CONFIG_MII
 335 #define CONFIG_MII_DEFAULT_TSEC         1
 336 #define CONFIG_TSEC1                    1
 337 #define CONFIG_TSEC1_NAME               "eTSEC1"
 338 #define CONFIG_TSEC2                    1
 339 #define CONFIG_TSEC2_NAME               "eTSEC2"
 340 #define CONFIG_TSEC3                    1
 341 #define CONFIG_TSEC3_NAME               "eTSEC3"
 342
 343 #define TSEC1_PHY_ADDR                  2
 344 #define TSEC2_PHY_ADDR                  0
 345 #define TSEC3_PHY_ADDR                  1
 346
 347 #define TSEC1_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 348 #define TSEC2_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 349 #define TSEC3_FLAGS                     (TSEC_GIGABIT | TSEC_REDUCED)
 350
 351 #define TSEC1_PHYIDX                    0
 352 #define TSEC2_PHYIDX                    0
 353 #define TSEC3_PHYIDX                    0
 354
 355 #define CONFIG_ETHPRIME                 "eTSEC1"
 356
 357 #define CONFIG_PHY_GIGE
 358 #define CONFIG_PHYLIB
 359 #define CONFIG_PHY_ATHEROS
 360
 361 #define CONFIG_HAS_ETH0
 362 #define CONFIG_HAS_ETH1
 363 #define CONFIG_HAS_ETH2
 364 #endif
 365
 366 /* PCIe */
 367 #define CONFIG_PCIE1            /* PCIE controller 1 */
 368 #define CONFIG_PCIE2            /* PCIE controller 2 */
 369
 370 #ifdef CONFIG_PCI
 371 #define CONFIG_PCI_SCAN_SHOW
 372 #define CONFIG_CMD_PCI
 373 #endif
 374
 375 #define CONFIG_CMDLINE_TAG
 376 #define CONFIG_CMDLINE_EDITING
 377
 378 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 379 #define CONFIG_LAYERSCAPE_NS_ACCESS
 380 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 381 #define CONFIG_TIMER_CLK_FREQ           12500000
 382
 383 #define CONFIG_HWCONFIG
 384 #define HWCONFIG_BUFFER_SIZE            256
 385
 386 #define CONFIG_FSL_DEVICE_DISABLE
 387
 388
 389 #ifdef CONFIG_LPUART
 390 #define CONFIG_EXTRA_ENV_SETTINGS       \
 391         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 392         "initrd_high=0xffffffff\0"      \
 393         "fdt_high=0xffffffff\0"
 394 #else
 395 #define CONFIG_EXTRA_ENV_SETTINGS       \
 396         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 397         "initrd_high=0xffffffff\0"      \
 398         "fdt_high=0xffffffff\0"
 399 #endif
 400
 401 /*
 402  * Miscellaneous configurable options
 403  */
 404 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 405 #define CONFIG_AUTO_COMPLETE
 406 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 407 #define CONFIG_SYS_PBSIZE               \
 408                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 409 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 410 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 411
 412 #define CONFIG_SYS_MEMTEST_START        0x80000000
 413 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 414
 415 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 416
 417 #define CONFIG_LS102XA_STREAM_ID
 418
 419 /*
 420  * Stack sizes
 421  * The stack sizes are set up in start.S using the settings below
 422  */
 423 #define CONFIG_STACKSIZE                (30 * 1024)
 424
 425 #define CONFIG_SYS_INIT_SP_OFFSET \
 426         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 427 #define CONFIG_SYS_INIT_SP_ADDR \
 428         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 429
 430 #ifdef CONFIG_SPL_BUILD
 431 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 432 #else
 433 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 434 #endif
 435
 436 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 437
 438 /*
 439  * Environment
 440  */
 441 #define CONFIG_ENV_OVERWRITE
 442
 443 #if defined(CONFIG_SD_BOOT)
 444 #define CONFIG_ENV_OFFSET               0x100000
 445 #define CONFIG_ENV_IS_IN_MMC
 446 #define CONFIG_SYS_MMC_ENV_DEV          0
 447 #define CONFIG_ENV_SIZE                 0x20000
 448 #elif defined(CONFIG_QSPI_BOOT)
 449 #define CONFIG_ENV_IS_IN_SPI_FLASH
 450 #define CONFIG_ENV_SIZE                 0x2000
 451 #define CONFIG_ENV_OFFSET               0x100000
 452 #define CONFIG_ENV_SECT_SIZE            0x10000
 453 #else
 454 #define CONFIG_ENV_IS_IN_FLASH
 455 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 456 #define CONFIG_ENV_SIZE                 0x20000
 457 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K (one sector) */
 458 #endif
 459
 460 #define CONFIG_MISC_INIT_R
 461
 462 /* Hash command with SHA acceleration supported in hardware */
 463 #ifdef CONFIG_FSL_CAAM
 464 #define CONFIG_CMD_HASH
 465 #define CONFIG_SHA_HW_ACCEL
 466 #endif
 467
 468 #include <asm/fsl_secure_boot.h>
 469 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 470
 471 #endif