include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_PSCI_1_0
  11
  12 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  13
  14 #define CONFIG_SYS_FSL_CLK
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT
  17 #define CONFIG_DEEP_SLEEP
  18
  19 /*
  20  * Size of malloc() pool
  21  */
  22 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
  23
  24 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  25 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  26
  27 #define CONFIG_SYS_CLK_FREQ             100000000
  28 #define CONFIG_DDR_CLK_FREQ             100000000
  29
  30 #define DDR_SDRAM_CFG                   0x470c0008
  31 #define DDR_CS0_BNDS                    0x008000bf
  32 #define DDR_CS0_CONFIG                  0x80014302
  33 #define DDR_TIMING_CFG_0                0x50550004
  34 #define DDR_TIMING_CFG_1                0xbcb38c56
  35 #define DDR_TIMING_CFG_2                0x0040d120
  36 #define DDR_TIMING_CFG_3                0x010e1000
  37 #define DDR_TIMING_CFG_4                0x00000001
  38 #define DDR_TIMING_CFG_5                0x03401400
  39 #define DDR_SDRAM_CFG_2                 0x00401010
  40 #define DDR_SDRAM_MODE                  0x00061c60
  41 #define DDR_SDRAM_MODE_2                0x00180000
  42 #define DDR_SDRAM_INTERVAL              0x18600618
  43 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  44 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  45 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  46 #define DDR_DDR_CDR1                    0x80040000
  47 #define DDR_DDR_CDR2                    0x00000001
  48 #define DDR_SDRAM_CLK_CNTL              0x02000000
  49 #define DDR_DDR_ZQ_CNTL                 0x89080600
  50 #define DDR_CS0_CONFIG_2                0
  51 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  52 #define SDRAM_CFG2_D_INIT               0x00000010
  53 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  54 #define SDRAM_CFG2_FRC_SR               0x80000000
  55 #define SDRAM_CFG_BI                    0x00000001
  56
  57 #ifdef CONFIG_RAMBOOT_PBL
  58 #define CONFIG_SYS_FSL_PBL_PBI  board/freescale/ls1021atwr/ls102xa_pbi.cfg
  59 #endif
  60
  61 #ifdef CONFIG_SD_BOOT
  62 #ifdef CONFIG_SD_BOOT_QSPI
  63 #define CONFIG_SYS_FSL_PBL_RCW  \
  64         board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
  65 #else
  66 #define CONFIG_SYS_FSL_PBL_RCW  \
  67         board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
  68 #endif
  69
  70 #ifdef CONFIG_NXP_ESBC
  71 /*
  72  * HDR would be appended at end of image and copied to DDR along
  73  * with U-Boot image.
  74  */
  75 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  76 #endif /* ifdef CONFIG_NXP_ESBC */
  77
  78 #define CONFIG_SPL_MAX_SIZE             0x1a000
  79 #define CONFIG_SPL_STACK                0x1001d000
  80 #define CONFIG_SPL_PAD_TO               0x1c000
  81
  82 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  83                 CONFIG_SYS_MONITOR_LEN)
  84 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  85 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  86 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  87
  88 #ifdef CONFIG_U_BOOT_HDR_SIZE
  89 /*
  90  * HDR would be appended at end of image and copied to DDR along
  91  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  92  * size increases then increase this size in case of secure boot as
  93  * it uses raw u-boot image instead of fit image.
  94  */
  95 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  96 #else
  97 #define CONFIG_SYS_MONITOR_LEN          0x100000
  98 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  99 #endif
 100
 101 #define PHYS_SDRAM                      0x80000000
 102 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
 103
 104 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 105 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 106
 107 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 108
 109 /*
 110  * IFC Definitions
 111  */
 112 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 113 #define CONFIG_FSL_IFC
 114 #define CONFIG_SYS_FLASH_BASE           0x60000000
 115 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 116
 117 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 118 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 119                                 CSPR_PORT_SIZE_16 | \
 120                                 CSPR_MSEL_NOR | \
 121                                 CSPR_V)
 122 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 123
 124 /* NOR Flash Timing Params */
 125 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 126                                         CSOR_NOR_TRHZ_80)
 127 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 128                                         FTIM0_NOR_TEADC(0x5) | \
 129                                         FTIM0_NOR_TAVDS(0x0) | \
 130                                         FTIM0_NOR_TEAHC(0x5))
 131 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 132                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 133                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 134 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 135                                         FTIM2_NOR_TCH(0x4) | \
 136                                         FTIM2_NOR_TWP(0x1c) | \
 137                                         FTIM2_NOR_TWPH(0x0e))
 138 #define CONFIG_SYS_NOR_FTIM3            0
 139
 140 #define CONFIG_SYS_FLASH_QUIET_TEST
 141 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 142
 143 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 144 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 145 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 146 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 147
 148 #define CONFIG_SYS_FLASH_EMPTY_INFO
 149 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 150
 151 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 152 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 153 #endif
 154
 155 /* CPLD */
 156
 157 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 158 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 159
 160 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 161 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 162                                         CSPR_PORT_SIZE_8 | \
 163                                         CSPR_MSEL_GPCM | \
 164                                         CSPR_V)
 165 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 166 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 167                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 168                                         CSOR_NOR_TRHZ_80)
 169
 170 /* CPLD Timing parameters for IFC GPCM */
 171 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 172                                         FTIM0_GPCM_TEADC(0xf) | \
 173                                         FTIM0_GPCM_TEAHC(0xf))
 174 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 175                                         FTIM1_GPCM_TRAD(0x3f))
 176 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 177                                         FTIM2_GPCM_TCH(0xf) | \
 178                                         FTIM2_GPCM_TWP(0xff))
 179 #define CONFIG_SYS_FPGA_FTIM3           0x0
 180 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 181 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 182 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 183 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 184 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 185 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 186 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 187 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 188 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 189 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 190 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 191 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 192 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 193 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 194 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 195 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 196
 197 /*
 198  * Serial Port
 199  */
 200 #ifdef CONFIG_LPUART
 201 #define CONFIG_LPUART_32B_REG
 202 #else
 203 #define CONFIG_SYS_NS16550_SERIAL
 204 #ifndef CONFIG_DM_SERIAL
 205 #define CONFIG_SYS_NS16550_REG_SIZE     1
 206 #endif
 207 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 208 #endif
 209
 210 /*
 211  * I2C
 212  */
 213 #ifndef CONFIG_DM_I2C
 214 #define CONFIG_SYS_I2C
 215 #else
 216 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 217 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
 218 #endif
 219 #define CONFIG_SYS_I2C_MXC
 220 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 221 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 222 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 223
 224 /* EEPROM */
 225 #define CONFIG_ID_EEPROM
 226 #define CONFIG_SYS_I2C_EEPROM_NXID
 227 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 228 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x53
 229 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 230 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 232
 233 /*
 234  * MMC
 235  */
 236
 237 /*
 238  * Video
 239  */
 240 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 241 #define CONFIG_VIDEO_LOGO
 242 #define CONFIG_VIDEO_BMP_LOGO
 243
 244 #define CONFIG_FSL_DCU_SII9022A
 245 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 246 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 247 #endif
 248
 249 /*
 250  * eTSEC
 251  */
 252
 253 #ifdef CONFIG_TSEC_ENET
 254 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 255 #endif
 256
 257 /* PCIe */
 258 #define CONFIG_PCIE1            /* PCIE controller 1 */
 259 #define CONFIG_PCIE2            /* PCIE controller 2 */
 260
 261 #ifdef CONFIG_PCI
 262 #define CONFIG_PCI_SCAN_SHOW
 263 #endif
 264
 265 #define CONFIG_CMDLINE_TAG
 266
 267 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 268 #define CONFIG_LAYERSCAPE_NS_ACCESS
 269 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 270 #define COUNTER_FREQUENCY               12500000
 271
 272 #define CONFIG_HWCONFIG
 273 #define HWCONFIG_BUFFER_SIZE            256
 274
 275 #define CONFIG_FSL_DEVICE_DISABLE
 276
 277 #define BOOT_TARGET_DEVICES(func) \
 278         func(MMC, mmc, 0) \
 279         func(USB, usb, 0) \
 280         func(DHCP, dhcp, na)
 281 #include <config_distro_bootcmd.h>
 282
 283 #ifdef CONFIG_LPUART
 284 #define CONFIG_EXTRA_ENV_SETTINGS       \
 285         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 286                 "cma=64M@0x0-0xb0000000\0" \
 287         "initrd_high=0xffffffff\0"      \
 288         "fdt_addr=0x64f00000\0"         \
 289         "kernel_addr=0x65000000\0"      \
 290         "scriptaddr=0x80000000\0"       \
 291         "scripthdraddr=0x80080000\0"    \
 292         "fdtheader_addr_r=0x80100000\0" \
 293         "kernelheader_addr_r=0x80200000\0"      \
 294         "kernel_addr_r=0x81000000\0"    \
 295         "fdt_addr_r=0x90000000\0"       \
 296         "ramdisk_addr_r=0xa0000000\0"   \
 297         "load_addr=0xa0000000\0"        \
 298         "kernel_size=0x2800000\0"       \
 299         "kernel_addr_sd=0x8000\0"       \
 300         "kernel_size_sd=0x14000\0"      \
 301         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 302         BOOTENV                         \
 303         "boot_scripts=ls1021atwr_boot.scr\0"    \
 304         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 305                 "scan_dev_for_boot_part="       \
 306                         "part list ${devtype} ${devnum} devplist; "     \
 307                         "env exists devplist || setenv devplist 1; "    \
 308                         "for distro_bootpart in ${devplist}; do "       \
 309                         "if fstype ${devtype} "                         \
 310                                 "${devnum}:${distro_bootpart} "         \
 311                                 "bootfstype; then "                     \
 312                                 "run scan_dev_for_boot; "               \
 313                         "fi; "                  \
 314                 "done\0"                        \
 315         "scan_dev_for_boot="                              \
 316                 "echo Scanning ${devtype} "               \
 317                                 "${devnum}:${distro_bootpart}...; "  \
 318                 "for prefix in ${boot_prefixes}; do "     \
 319                         "run scan_dev_for_scripts; "      \
 320                 "done;"                                   \
 321                 "\0"                                      \
 322         "boot_a_script="                                  \
 323                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 324                         "${scriptaddr} ${prefix}${script}; "    \
 325                 "env exists secureboot && load ${devtype} "     \
 326                         "${devnum}:${distro_bootpart} "         \
 327                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 328                         "env exists secureboot "        \
 329                         "&& esbc_validate ${scripthdraddr};"    \
 330                 "source ${scriptaddr}\0"          \
 331         "installer=load mmc 0:2 $load_addr "    \
 332                 "/flex_installer_arm32.itb; "           \
 333                 "bootm $load_addr#ls1021atwr\0" \
 334         "qspi_bootcmd=echo Trying load from qspi..;"    \
 335                 "sf probe && sf read $load_addr "       \
 336                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 337         "nor_bootcmd=echo Trying load from nor..;"      \
 338                 "cp.b $kernel_addr $load_addr "         \
 339                 "$kernel_size && bootm $load_addr#$board\0"
 340 #else
 341 #define CONFIG_EXTRA_ENV_SETTINGS       \
 342         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 343                 "cma=64M@0x0-0xb0000000\0" \
 344         "initrd_high=0xffffffff\0"      \
 345         "fdt_addr=0x64f00000\0"         \
 346         "kernel_addr=0x61000000\0"      \
 347         "kernelheader_addr=0x60800000\0"        \
 348         "scriptaddr=0x80000000\0"       \
 349         "scripthdraddr=0x80080000\0"    \
 350         "fdtheader_addr_r=0x80100000\0" \
 351         "kernelheader_addr_r=0x80200000\0"      \
 352         "kernel_addr_r=0x81000000\0"    \
 353         "kernelheader_size=0x40000\0"   \
 354         "fdt_addr_r=0x90000000\0"       \
 355         "ramdisk_addr_r=0xa0000000\0"   \
 356         "load_addr=0xa0000000\0"        \
 357         "kernel_size=0x2800000\0"       \
 358         "kernel_addr_sd=0x8000\0"       \
 359         "kernel_size_sd=0x14000\0"      \
 360         "kernelhdr_addr_sd=0x4000\0"            \
 361         "kernelhdr_size_sd=0x10\0"              \
 362         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 363         BOOTENV                         \
 364         "boot_scripts=ls1021atwr_boot.scr\0"    \
 365         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 366                 "scan_dev_for_boot_part="       \
 367                         "part list ${devtype} ${devnum} devplist; "     \
 368                         "env exists devplist || setenv devplist 1; "    \
 369                         "for distro_bootpart in ${devplist}; do "       \
 370                         "if fstype ${devtype} "                         \
 371                                 "${devnum}:${distro_bootpart} "         \
 372                                 "bootfstype; then "                     \
 373                                 "run scan_dev_for_boot; "               \
 374                         "fi; "                  \
 375                 "done\0"                        \
 376         "scan_dev_for_boot="                              \
 377                 "echo Scanning ${devtype} "               \
 378                                 "${devnum}:${distro_bootpart}...; "  \
 379                 "for prefix in ${boot_prefixes}; do "     \
 380                         "run scan_dev_for_scripts; "      \
 381                 "done;"                                   \
 382                 "\0"                                      \
 383         "boot_a_script="                                  \
 384                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 385                         "${scriptaddr} ${prefix}${script}; "    \
 386                 "env exists secureboot && load ${devtype} "     \
 387                         "${devnum}:${distro_bootpart} "         \
 388                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 389                         "&& esbc_validate ${scripthdraddr};"    \
 390                 "source ${scriptaddr}\0"          \
 391         "qspi_bootcmd=echo Trying load from qspi..;"    \
 392                 "sf probe && sf read $load_addr "       \
 393                 "$kernel_addr $kernel_size; env exists secureboot "     \
 394                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 395                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 396                 "bootm $load_addr#$board\0" \
 397         "nor_bootcmd=echo Trying load from nor..;"      \
 398                 "cp.b $kernel_addr $load_addr "         \
 399                 "$kernel_size; env exists secureboot "  \
 400                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 401                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 402                 "bootm $load_addr#$board\0"     \
 403         "sd_bootcmd=echo Trying load from SD ..;"       \
 404                 "mmcinfo && mmc read $load_addr "       \
 405                 "$kernel_addr_sd $kernel_size_sd && "   \
 406                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 407                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 408                 " && esbc_validate ${kernelheader_addr_r};"     \
 409                 "bootm $load_addr#$board\0"
 410 #endif
 411
 412 #undef CONFIG_BOOTCOMMAND
 413 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 414 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "     \
 415                            "env exists secureboot && esbc_halt"
 416 #elif defined(CONFIG_SD_BOOT)
 417 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "       \
 418                            "env exists secureboot && esbc_halt;"
 419 #else
 420 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;"       \
 421                            "env exists secureboot && esbc_halt;"
 422 #endif
 423
 424 /*
 425  * Miscellaneous configurable options
 426  */
 427 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 428
 429 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 430
 431 #define CONFIG_LS102XA_STREAM_ID
 432
 433 #define CONFIG_SYS_INIT_SP_OFFSET \
 434         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 435 #define CONFIG_SYS_INIT_SP_ADDR \
 436         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 437
 438 #ifdef CONFIG_SPL_BUILD
 439 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 440 #undef CONFIG_DM_I2C
 441 #else
 442 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 443 #endif
 444
 445 #define CONFIG_SYS_QE_FW_ADDR     0x60940000
 446
 447 /*
 448  * Environment
 449  */
 450 #define CONFIG_ENV_OVERWRITE
 451
 452 #if defined(CONFIG_SD_BOOT)
 453 #define CONFIG_SYS_MMC_ENV_DEV          0
 454 #endif
 455
 456 #include <asm/fsl_secure_boot.h>
 457 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 458
 459 #endif