include/configs/ls1021atsn.h

   1 /* SPDX-License-Identifier: GPL-2.0
   2  * Copyright 2016-2019 NXP
   3  * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  10
  11 #define CONFIG_DEEP_SLEEP
  12
  13 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  14 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  15
  16 /* XHCI Support - enabled by default */
  17 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  18
  19 #define DDR_SDRAM_CFG                   0x470c0008
  20 #define DDR_CS0_BNDS                    0x008000bf
  21 #define DDR_CS0_CONFIG                  0x80014302
  22 #define DDR_TIMING_CFG_0                0x50550004
  23 #define DDR_TIMING_CFG_1                0xbcb38c56
  24 #define DDR_TIMING_CFG_2                0x0040d120
  25 #define DDR_TIMING_CFG_3                0x010e1000
  26 #define DDR_TIMING_CFG_4                0x00000001
  27 #define DDR_TIMING_CFG_5                0x03401400
  28 #define DDR_SDRAM_CFG_2                 0x00401010
  29 #define DDR_SDRAM_MODE                  0x00061c60
  30 #define DDR_SDRAM_MODE_2                0x00180000
  31 #define DDR_SDRAM_INTERVAL              0x18600618
  32 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  33 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  34 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  35 #define DDR_DDR_CDR1                    0x80040000
  36 #define DDR_DDR_CDR2                    0x00000001
  37 #define DDR_SDRAM_CLK_CNTL              0x02000000
  38 #define DDR_DDR_ZQ_CNTL                 0x89080600
  39 #define DDR_CS0_CONFIG_2                0
  40 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  41 #define SDRAM_CFG2_D_INIT               0x00000010
  42 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  43 #define SDRAM_CFG2_FRC_SR               0x80000000
  44 #define SDRAM_CFG_BI                    0x00000001
  45
  46 #ifdef CONFIG_SD_BOOT
  47 #ifdef CONFIG_NXP_ESBC
  48 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  49 #endif /* ifdef CONFIG_NXP_ESBC */
  50
  51 #define CONFIG_SPL_MAX_SIZE             0x1a000
  52 #define CONFIG_SPL_STACK                0x1001d000
  53 #define CONFIG_SPL_PAD_TO               0x1c000
  54
  55 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  56                 CONFIG_SYS_MONITOR_LEN)
  57 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  58 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  59 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  60
  61 #ifdef CONFIG_U_BOOT_HDR_SIZE
  62 /*
  63  * HDR would be appended at end of image and copied to DDR along
  64  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  65  * size increases then increase this size in case of secure boot as
  66  * it uses raw U-Boot image instead of FIT image.
  67  */
  68 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  69 #else
  70 #define CONFIG_SYS_MONITOR_LEN          0x100000
  71 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  72 #endif
  73
  74 #define PHYS_SDRAM                      0x80000000
  75 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  76
  77 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  78 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  79
  80 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  81
  82 /* Serial Port */
  83 #define CONFIG_SYS_NS16550_SERIAL
  84 #ifndef CONFIG_DM_SERIAL
  85 #define CONFIG_SYS_NS16550_REG_SIZE     1
  86 #endif
  87 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
  88
  89 /* I2C */
  90
  91 /* EEPROM */
  92 #define CONFIG_SYS_I2C_EEPROM_NXID
  93 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  94
  95 /* QSPI */
  96 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  97 #define FSL_QSPI_FLASH_NUM              2
  98
  99 /* PCIe */
 100 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 101 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 102 #define FSL_PCIE_COMPAT                 "fsl,ls1021a-pcie"
 103 #ifdef CONFIG_PCI
 104 #define CONFIG_PCI_SCAN_SHOW
 105 #endif
 106
 107 #define CONFIG_LAYERSCAPE_NS_ACCESS
 108 #define COUNTER_FREQUENCY               12500000
 109
 110 #define CONFIG_HWCONFIG
 111 #define HWCONFIG_BUFFER_SIZE            256
 112
 113 #define CONFIG_FSL_DEVICE_DISABLE
 114
 115 #define BOOT_TARGET_DEVICES(func) \
 116         func(MMC, mmc, 0) \
 117         func(USB, usb, 0) \
 118         func(DHCP, dhcp, na)
 119 #include <config_distro_bootcmd.h>
 120
 121 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 122         "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0"             \
 123         "initrd_high=0xffffffff\0"                                      \
 124         "fdt_addr=0x64f00000\0"                                         \
 125         "kernel_addr=0x61000000\0"                                      \
 126         "kernelheader_addr=0x60800000\0"                                \
 127         "scriptaddr=0x80000000\0"                                       \
 128         "scripthdraddr=0x80080000\0"                                    \
 129         "fdtheader_addr_r=0x80100000\0"                                 \
 130         "kernelheader_addr_r=0x80200000\0"                              \
 131         "kernel_addr_r=0x80008000\0"                                    \
 132         "kernelheader_size=0x40000\0"                                   \
 133         "fdt_addr_r=0x8f000000\0"                                       \
 134         "ramdisk_addr_r=0xa0000000\0"                                   \
 135         "load_addr=0x80008000\0"                                        \
 136         "kernel_size=0x2800000\0"                                       \
 137         "kernel_addr_sd=0x8000\0"                                       \
 138         "kernel_size_sd=0x14000\0"                                      \
 139         "kernelhdr_addr_sd=0x4000\0"                                    \
 140         "kernelhdr_size_sd=0x10\0"                                      \
 141         BOOTENV                                                         \
 142         "boot_scripts=ls1021atsn_boot.scr\0"                            \
 143         "boot_script_hdr=hdr_ls1021atsn_bs.out\0"                       \
 144                 "scan_dev_for_boot_part="                               \
 145                         "part list ${devtype} ${devnum} devplist; "     \
 146                         "env exists devplist || setenv devplist 1; "    \
 147                         "for distro_bootpart in ${devplist}; do "       \
 148                         "if fstype ${devtype} "                         \
 149                                 "${devnum}:${distro_bootpart} "         \
 150                                 "bootfstype; then "                     \
 151                                 "run scan_dev_for_boot; "               \
 152                         "fi; "                                          \
 153                 "done\0"                                                \
 154         "scan_dev_for_boot="                                            \
 155                 "echo Scanning ${devtype} "                             \
 156                                 "${devnum}:${distro_bootpart}...; "     \
 157                 "for prefix in ${boot_prefixes}; do "                   \
 158                         "run scan_dev_for_scripts; "                    \
 159                         "run scan_dev_for_extlinux; "                   \
 160                 "done;"                                                 \
 161                 "\0"                                                    \
 162         "boot_a_script="                                                \
 163                 "load ${devtype} ${devnum}:${distro_bootpart} "         \
 164                         "${scriptaddr} ${prefix}${script}; "            \
 165                 "env exists secureboot && load ${devtype} "             \
 166                         "${devnum}:${distro_bootpart} "                 \
 167                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 168                         "&& esbc_validate ${scripthdraddr};"            \
 169                 "source ${scriptaddr}\0"                                \
 170         "qspi_bootcmd=echo Trying load from qspi..;"                    \
 171                 "sf probe && sf read $load_addr "                       \
 172                 "$kernel_addr $kernel_size; env exists secureboot "     \
 173                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 174                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 175                 "bootm $load_addr#$board\0"                             \
 176         "sd_bootcmd=echo Trying load from SD ..;"                       \
 177                 "mmcinfo && mmc read $load_addr "                       \
 178                 "$kernel_addr_sd $kernel_size_sd && "                   \
 179                 "env exists secureboot && mmc read $kernelheader_addr_r " \
 180                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 181                 " && esbc_validate ${kernelheader_addr_r};"             \
 182                 "bootm $load_addr#$board\0"
 183
 184 /* Miscellaneous configurable options */
 185 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 186
 187 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 188 #define CONFIG_SYS_PBSIZE               \
 189                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 190 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 191 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 192
 193 #define CONFIG_LS102XA_STREAM_ID
 194
 195 #define CONFIG_SYS_INIT_SP_OFFSET \
 196         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 197 #define CONFIG_SYS_INIT_SP_ADDR \
 198         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 199
 200 #ifdef CONFIG_SPL_BUILD
 201 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 202 #else
 203 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 204 #endif
 205
 206 /* Environment */
 207
 208 #define CONFIG_SYS_BOOTM_LEN            0x8000000 /* 128 MB */
 209
 210 #endif