include/configs/ls1012ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 NXP
   4  * Copyright 2016 Freescale Semiconductor, Inc.
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  15 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  16 #define CONFIG_CMD_MEMINFO
  17
  18
  19 /* ENV */
  20 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  21 /*
  22  * I2C IO expander
  23  */
  24
  25 #define I2C_MUX_IO_ADDR         0x24
  26 #define I2C_MUX_IO2_ADDR        0x25
  27 #define I2C_MUX_IO_0            0
  28 #define I2C_MUX_IO_1            1
  29 #define SW_BOOT_MASK            0x03
  30 #define SW_BOOT_EMU             0x02
  31 #define SW_BOOT_BANK1           0x00
  32 #define SW_BOOT_BANK2           0x01
  33 #define SW_REV_MASK             0xF8
  34 #define SW_REV_A                0xF8
  35 #define SW_REV_B                0xF0
  36 #define SW_REV_C                0xE8
  37 #define SW_REV_C1               0xE0
  38 #define SW_REV_C2               0xD8
  39 #define SW_REV_D                0xD0
  40 #define SW_REV_E                0xC8
  41 #define __PHY_MASK              0xF9
  42 #define __PHY_ETH2_MASK         0xFB
  43 #define __PHY_ETH1_MASK         0xFD
  44
  45 /*  MMC  */
  46 #ifdef CONFIG_MMC
  47 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  48 #endif
  49
  50
  51 #define CONFIG_PCIE1            /* PCIE controller 1 */
  52
  53 #define CONFIG_PCI_SCAN_SHOW
  54
  55 #define CONFIG_CMD_MEMINFO
  56
  57 #undef CONFIG_EXTRA_ENV_SETTINGS
  58 #define CONFIG_EXTRA_ENV_SETTINGS               \
  59         "verify=no\0"                           \
  60         "fdt_high=0xffffffffffffffff\0"         \
  61         "initrd_high=0xffffffffffffffff\0"      \
  62         "fdt_addr=0x00f00000\0"                 \
  63         "kernel_addr=0x01000000\0"              \
  64         "kernelheader_addr=0x600000\0"          \
  65         "scriptaddr=0x80000000\0"               \
  66         "scripthdraddr=0x80080000\0"            \
  67         "fdtheader_addr_r=0x80100000\0"         \
  68         "kernelheader_addr_r=0x80200000\0"      \
  69         "kernel_addr_r=0x96000000\0"            \
  70         "fdt_addr_r=0x90000000\0"               \
  71         "load_addr=0xa0000000\0"                \
  72         "kernel_size=0x2800000\0"               \
  73         "kernelheader_size=0x40000\0"           \
  74         "console=ttyS0,115200\0"                \
  75         BOOTENV                                 \
  76         "boot_scripts=ls1012ardb_boot.scr\0"    \
  77         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  78         "scan_dev_for_boot_part="               \
  79              "part list ${devtype} ${devnum} devplist; "        \
  80              "env exists devplist || setenv devplist 1; "       \
  81              "for distro_bootpart in ${devplist}; do "          \
  82                   "if fstype ${devtype} "                       \
  83                       "${devnum}:${distro_bootpart} "           \
  84                       "bootfstype; then "                       \
  85                       "run scan_dev_for_boot; " \
  86                   "fi; "                        \
  87               "done\0"                          \
  88         "scan_dev_for_boot="                              \
  89                 "echo Scanning ${devtype} "               \
  90                                 "${devnum}:${distro_bootpart}...; "  \
  91                 "for prefix in ${boot_prefixes}; do "     \
  92                         "run scan_dev_for_scripts; "      \
  93                 "done;"                                   \
  94                 "\0"                                      \
  95         "boot_a_script="                                  \
  96                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  97                         "${scriptaddr} ${prefix}${script}; "    \
  98                 "env exists secureboot && load ${devtype} "     \
  99                         "${devnum}:${distro_bootpart} "         \
 100                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 101                         "env exists secureboot "        \
 102                         "&& esbc_validate ${scripthdraddr};"    \
 103                 "source ${scriptaddr}\0"          \
 104         "installer=load mmc 0:2 $load_addr "    \
 105                    "/flex_installer_arm64.itb; "        \
 106                    "bootm $load_addr#$board\0"  \
 107         "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
 108                 "sf probe && sf read $load_addr "       \
 109                 "$kernel_addr $kernel_size; env exists secureboot "     \
 110                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 111                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 112                 "bootm $load_addr#$board\0"
 113
 114 #undef CONFIG_BOOTCOMMAND
 115 #ifdef CONFIG_TFABOOT
 116 #undef QSPI_NOR_BOOTCOMMAND
 117 #define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 118                              "env exists secureboot && esbc_halt;"
 119 #else
 120 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 121                            "env exists secureboot && esbc_halt;"
 122 #endif
 123
 124 #include <asm/fsl_secure_boot.h>
 125
 126 #endif /* __LS1012ARDB_H__ */