include/configs/ls1012ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020-2021 NXP
   4  * Copyright 2016 Freescale Semiconductor, Inc.
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CFG_SYS_SDRAM_SIZE              0x40000000
  14
  15 /*
  16  * I2C IO expander
  17  */
  18
  19 #define I2C_MUX_IO_ADDR         0x24
  20 #define I2C_MUX_IO2_ADDR        0x25
  21 #define I2C_MUX_IO_0            0
  22 #define I2C_MUX_IO_1            1
  23 #define SW_BOOT_MASK            0x03
  24 #define SW_BOOT_EMU             0x02
  25 #define SW_BOOT_BANK1           0x00
  26 #define SW_BOOT_BANK2           0x01
  27 #define SW_REV_MASK             0xF8
  28 #define SW_REV_A                0xF8
  29 #define SW_REV_B                0xF0
  30 #define SW_REV_C                0xE8
  31 #define SW_REV_C1               0xE0
  32 #define SW_REV_C2               0xD8
  33 #define SW_REV_D                0xD0
  34 #define SW_REV_E                0xC8
  35 #define __PHY_MASK              0xF9
  36 #define __PHY_ETH2_MASK         0xFB
  37 #define __PHY_ETH1_MASK         0xFD
  38
  39 #undef CFG_EXTRA_ENV_SETTINGS
  40 #define CFG_EXTRA_ENV_SETTINGS          \
  41         "verify=no\0"                           \
  42         "initrd_high=0xffffffffffffffff\0"      \
  43         "kernel_addr=0x01000000\0"              \
  44         "kernelheader_addr=0x600000\0"          \
  45         "scriptaddr=0x80000000\0"               \
  46         "scripthdraddr=0x80080000\0"            \
  47         "fdtheader_addr_r=0x80100000\0"         \
  48         "kernelheader_addr_r=0x80200000\0"      \
  49         "kernel_addr_r=0x96000000\0"            \
  50         "fdt_addr_r=0x90000000\0"               \
  51         "load_addr=0xa0000000\0"                \
  52         "kernel_size=0x2800000\0"               \
  53         "kernelheader_size=0x40000\0"           \
  54         "bootm_size=0x10000000\0"               \
  55         "console=ttyS0,115200\0"                \
  56         BOOTENV                                 \
  57         "boot_scripts=ls1012ardb_boot.scr\0"    \
  58         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  59         "scan_dev_for_boot_part="               \
  60              "part list ${devtype} ${devnum} devplist; "        \
  61              "env exists devplist || setenv devplist 1; "       \
  62              "for distro_bootpart in ${devplist}; do "          \
  63                   "if fstype ${devtype} "                       \
  64                       "${devnum}:${distro_bootpart} "           \
  65                       "bootfstype; then "                       \
  66                       "run scan_dev_for_boot; " \
  67                   "fi; "                        \
  68               "done\0"                          \
  69         "boot_a_script="                                  \
  70                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  71                         "${scriptaddr} ${prefix}${script}; "    \
  72                 "env exists secureboot && load ${devtype} "     \
  73                         "${devnum}:${distro_bootpart} "         \
  74                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  75                         "env exists secureboot "        \
  76                         "&& esbc_validate ${scripthdraddr};"    \
  77                 "source ${scriptaddr}\0"          \
  78         "installer=load mmc 0:2 $load_addr "    \
  79                    "/flex_installer_arm64.itb; "        \
  80                    "bootm $load_addr#$board\0"  \
  81         "qspi_bootcmd=echo Trying load from qspi..;"    \
  82                 "sf probe && sf read $load_addr "       \
  83                 "$kernel_addr $kernel_size; env exists secureboot "     \
  84                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  85                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  86                 "bootm $load_addr#$board\0"
  87
  88 #ifdef CONFIG_TFABOOT
  89 #undef QSPI_NOR_BOOTCOMMAND
  90 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
  91                              "env exists secureboot && esbc_halt;"
  92 #endif
  93
  94 #include <asm/fsl_secure_boot.h>
  95
  96 #endif /* __LS1012ARDB_H__ */