include/configs/ls1012ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020-2021 NXP
   4  * Copyright 2016 Freescale Semiconductor, Inc.
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  15
  16 /*
  17  * I2C IO expander
  18  */
  19
  20 #define I2C_MUX_IO_ADDR         0x24
  21 #define I2C_MUX_IO2_ADDR        0x25
  22 #define I2C_MUX_IO_0            0
  23 #define I2C_MUX_IO_1            1
  24 #define SW_BOOT_MASK            0x03
  25 #define SW_BOOT_EMU             0x02
  26 #define SW_BOOT_BANK1           0x00
  27 #define SW_BOOT_BANK2           0x01
  28 #define SW_REV_MASK             0xF8
  29 #define SW_REV_A                0xF8
  30 #define SW_REV_B                0xF0
  31 #define SW_REV_C                0xE8
  32 #define SW_REV_C1               0xE0
  33 #define SW_REV_C2               0xD8
  34 #define SW_REV_D                0xD0
  35 #define SW_REV_E                0xC8
  36 #define __PHY_MASK              0xF9
  37 #define __PHY_ETH2_MASK         0xFB
  38 #define __PHY_ETH1_MASK         0xFD
  39
  40 #define CONFIG_PCIE1            /* PCIE controller 1 */
  41
  42 #define CONFIG_PCI_SCAN_SHOW
  43
  44 #undef CONFIG_EXTRA_ENV_SETTINGS
  45 #define CONFIG_EXTRA_ENV_SETTINGS               \
  46         "verify=no\0"                           \
  47         "initrd_high=0xffffffffffffffff\0"      \
  48         "fdt_addr=0x00f00000\0"                 \
  49         "kernel_addr=0x01000000\0"              \
  50         "kernelheader_addr=0x600000\0"          \
  51         "scriptaddr=0x80000000\0"               \
  52         "scripthdraddr=0x80080000\0"            \
  53         "fdtheader_addr_r=0x80100000\0"         \
  54         "kernelheader_addr_r=0x80200000\0"      \
  55         "kernel_addr_r=0x96000000\0"            \
  56         "fdt_addr_r=0x90000000\0"               \
  57         "load_addr=0xa0000000\0"                \
  58         "kernel_size=0x2800000\0"               \
  59         "kernelheader_size=0x40000\0"           \
  60         "bootm_size=0x10000000\0"               \
  61         "console=ttyS0,115200\0"                \
  62         BOOTENV                                 \
  63         "boot_scripts=ls1012ardb_boot.scr\0"    \
  64         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  65         "scan_dev_for_boot_part="               \
  66              "part list ${devtype} ${devnum} devplist; "        \
  67              "env exists devplist || setenv devplist 1; "       \
  68              "for distro_bootpart in ${devplist}; do "          \
  69                   "if fstype ${devtype} "                       \
  70                       "${devnum}:${distro_bootpart} "           \
  71                       "bootfstype; then "                       \
  72                       "run scan_dev_for_boot; " \
  73                   "fi; "                        \
  74               "done\0"                          \
  75         "boot_a_script="                                  \
  76                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  77                         "${scriptaddr} ${prefix}${script}; "    \
  78                 "env exists secureboot && load ${devtype} "     \
  79                         "${devnum}:${distro_bootpart} "         \
  80                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  81                         "env exists secureboot "        \
  82                         "&& esbc_validate ${scripthdraddr};"    \
  83                 "source ${scriptaddr}\0"          \
  84         "installer=load mmc 0:2 $load_addr "    \
  85                    "/flex_installer_arm64.itb; "        \
  86                    "bootm $load_addr#$board\0"  \
  87         "qspi_bootcmd=echo Trying load from qspi..;"    \
  88                 "sf probe && sf read $load_addr "       \
  89                 "$kernel_addr $kernel_size; env exists secureboot "     \
  90                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  91                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  92                 "bootm $load_addr#$board\0"
  93
  94 #ifdef CONFIG_TFABOOT
  95 #undef QSPI_NOR_BOOTCOMMAND
  96 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\
  97                              "env exists secureboot && esbc_halt;"
  98 #endif
  99
 100 #include <asm/fsl_secure_boot.h>
 101
 102 #endif /* __LS1012ARDB_H__ */