include/configs/ls1012ardb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2020 NXP
   4  * Copyright 2016 Freescale Semiconductor, Inc.
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  15 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  16
  17 /*
  18  * I2C IO expander
  19  */
  20
  21 #define I2C_MUX_IO_ADDR         0x24
  22 #define I2C_MUX_IO2_ADDR        0x25
  23 #define I2C_MUX_IO_0            0
  24 #define I2C_MUX_IO_1            1
  25 #define SW_BOOT_MASK            0x03
  26 #define SW_BOOT_EMU             0x02
  27 #define SW_BOOT_BANK1           0x00
  28 #define SW_BOOT_BANK2           0x01
  29 #define SW_REV_MASK             0xF8
  30 #define SW_REV_A                0xF8
  31 #define SW_REV_B                0xF0
  32 #define SW_REV_C                0xE8
  33 #define SW_REV_C1               0xE0
  34 #define SW_REV_C2               0xD8
  35 #define SW_REV_D                0xD0
  36 #define SW_REV_E                0xC8
  37 #define __PHY_MASK              0xF9
  38 #define __PHY_ETH2_MASK         0xFB
  39 #define __PHY_ETH1_MASK         0xFD
  40
  41 /*  MMC  */
  42 #ifdef CONFIG_MMC
  43 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  44 #endif
  45
  46
  47 #define CONFIG_PCIE1            /* PCIE controller 1 */
  48
  49 #define CONFIG_PCI_SCAN_SHOW
  50
  51 #undef CONFIG_EXTRA_ENV_SETTINGS
  52 #define CONFIG_EXTRA_ENV_SETTINGS               \
  53         "verify=no\0"                           \
  54         "fdt_high=0xffffffffffffffff\0"         \
  55         "initrd_high=0xffffffffffffffff\0"      \
  56         "fdt_addr=0x00f00000\0"                 \
  57         "kernel_addr=0x01000000\0"              \
  58         "kernelheader_addr=0x600000\0"          \
  59         "scriptaddr=0x80000000\0"               \
  60         "scripthdraddr=0x80080000\0"            \
  61         "fdtheader_addr_r=0x80100000\0"         \
  62         "kernelheader_addr_r=0x80200000\0"      \
  63         "kernel_addr_r=0x96000000\0"            \
  64         "fdt_addr_r=0x90000000\0"               \
  65         "load_addr=0xa0000000\0"                \
  66         "kernel_size=0x2800000\0"               \
  67         "kernelheader_size=0x40000\0"           \
  68         "console=ttyS0,115200\0"                \
  69         BOOTENV                                 \
  70         "boot_scripts=ls1012ardb_boot.scr\0"    \
  71         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  72         "scan_dev_for_boot_part="               \
  73              "part list ${devtype} ${devnum} devplist; "        \
  74              "env exists devplist || setenv devplist 1; "       \
  75              "for distro_bootpart in ${devplist}; do "          \
  76                   "if fstype ${devtype} "                       \
  77                       "${devnum}:${distro_bootpart} "           \
  78                       "bootfstype; then "                       \
  79                       "run scan_dev_for_boot; " \
  80                   "fi; "                        \
  81               "done\0"                          \
  82         "scan_dev_for_boot="                              \
  83                 "echo Scanning ${devtype} "               \
  84                                 "${devnum}:${distro_bootpart}...; "  \
  85                 "for prefix in ${boot_prefixes}; do "     \
  86                         "run scan_dev_for_scripts; "      \
  87                 "done;"                                   \
  88                 "\0"                                      \
  89         "boot_a_script="                                  \
  90                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  91                         "${scriptaddr} ${prefix}${script}; "    \
  92                 "env exists secureboot && load ${devtype} "     \
  93                         "${devnum}:${distro_bootpart} "         \
  94                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  95                         "env exists secureboot "        \
  96                         "&& esbc_validate ${scripthdraddr};"    \
  97                 "source ${scriptaddr}\0"          \
  98         "installer=load mmc 0:2 $load_addr "    \
  99                    "/flex_installer_arm64.itb; "        \
 100                    "bootm $load_addr#$board\0"  \
 101         "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
 102                 "sf probe && sf read $load_addr "       \
 103                 "$kernel_addr $kernel_size; env exists secureboot "     \
 104                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 105                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 106                 "bootm $load_addr#$board\0"
 107
 108 #undef CONFIG_BOOTCOMMAND
 109 #ifdef CONFIG_TFABOOT
 110 #undef QSPI_NOR_BOOTCOMMAND
 111 #define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 112                              "env exists secureboot && esbc_halt;"
 113 #else
 114 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 115                            "env exists secureboot && esbc_halt;"
 116 #endif
 117
 118 #include <asm/fsl_secure_boot.h>
 119
 120 #endif /* __LS1012ARDB_H__ */