include/configs/ls1012afrwy.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018, 2021 NXP
   4  */
   5
   6 #ifndef __LS1012AFRWY_H__
   7 #define __LS1012AFRWY_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 #undef CONFIG_SYS_BOARD
  12 #define CONFIG_SYS_BOARD "ls1012afrwy"
  13
  14 /* Board Rev*/
  15 #define BOARD_REV_A_B                   0x0
  16 #define BOARD_REV_C                     0x00080000
  17 #define BOARD_REV_MASK                  0x001A0000
  18 /* DDR */
  19 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  20 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  21 #define SYS_SDRAM_SIZE_512              0x20000000
  22 #define SYS_SDRAM_SIZE_1024             0x40000000
  23 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  24
  25 /* ENV */
  26 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  27
  28 #ifndef CONFIG_SPL_BUILD
  29 #undef BOOT_TARGET_DEVICES
  30 #define BOOT_TARGET_DEVICES(func) \
  31         func(MMC, mmc, 0) \
  32         func(USB, usb, 0) \
  33         func(DHCP, dhcp, na)
  34 #endif
  35
  36 #define CONFIG_PCIE1            /* PCIE controller 1 */
  37
  38 #define CONFIG_PCI_SCAN_SHOW
  39
  40 #undef CONFIG_EXTRA_ENV_SETTINGS
  41 #define CONFIG_EXTRA_ENV_SETTINGS               \
  42         "verify=no\0"                           \
  43         "initrd_high=0xffffffffffffffff\0"      \
  44         "fdt_addr=0x00f00000\0"                 \
  45         "kernel_addr=0x01000000\0"              \
  46         "kernel_size_sd=0x16000\0"              \
  47         "kernelhdr_size_sd=0x10\0"              \
  48         "kernel_addr_sd=0x8000\0"               \
  49         "kernelhdr_addr_sd=0x4000\0"            \
  50         "kernelheader_addr=0x1fc000\0"          \
  51         "kernelheader_addr=0x1fc000\0"          \
  52         "scriptaddr=0x80000000\0"               \
  53         "scripthdraddr=0x80080000\0"            \
  54         "fdtheader_addr_r=0x80100000\0"         \
  55         "kernelheader_addr_r=0x80200000\0"      \
  56         "kernelheader_size=0x40000\0"           \
  57         "kernel_addr_r=0x92000000\0"            \
  58         "fdt_addr_r=0x90000000\0"               \
  59         "load_addr=0x92000000\0"                \
  60         "kernel_size=0x2800000\0"               \
  61         "kernelheader_size=0x40000\0"           \
  62         "bootm_size=0x10000000\0"               \
  63         "console=ttyS0,115200\0"                \
  64         "BOARD=ls1012afrwy\0"                   \
  65         BOOTENV                                 \
  66         "boot_scripts=ls1012afrwy_boot.scr\0"   \
  67         "boot_script_hdr=hdr_ls1012afrwy_bs.out\0"      \
  68         "scan_dev_for_boot_part="               \
  69              "part list ${devtype} ${devnum} devplist; "        \
  70              "env exists devplist || setenv devplist 1; "       \
  71              "for distro_bootpart in ${devplist}; do "          \
  72                   "if fstype ${devtype} "                       \
  73                       "${devnum}:${distro_bootpart} "           \
  74                       "bootfstype; then "                       \
  75                       "run scan_dev_for_boot; " \
  76                   "fi; "                        \
  77               "done\0"                          \
  78         "boot_a_script="                                  \
  79                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  80                         "${scriptaddr} ${prefix}${script}; "    \
  81                 "env exists secureboot && load ${devtype} "     \
  82                         "${devnum}:${distro_bootpart} "         \
  83                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  84                         "env exists secureboot "        \
  85                         "&& esbc_validate ${scripthdraddr};"    \
  86                 "source ${scriptaddr}\0"          \
  87         "sd_bootcmd=echo Trying load from sd card..;"           \
  88                 "mmcinfo; mmc read $load_addr "                 \
  89                 "$kernel_addr_sd $kernel_size_sd ;"             \
  90                 "env exists secureboot && mmc read $kernelheader_addr_r "\
  91                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
  92                 " && esbc_validate ${kernelheader_addr_r};"     \
  93                 "bootm $load_addr#$BOARD\0"
  94
  95 #undef CONFIG_BOOTCOMMAND
  96 #ifdef CONFIG_TFABOOT
  97 #undef QSPI_NOR_BOOTCOMMAND
  98 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
  99                              "env exists secureboot && esbc_halt;"
 100 #else
 101 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
 102                            "env exists secureboot && esbc_halt;"
 103 #endif
 104
 105 #include <asm/fsl_secure_boot.h>
 106
 107 #include <asm/fsl_secure_boot.h>
 108 #endif /* __LS1012AFRWY_H__ */