include/configs/ls1012afrwy.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __LS1012AFRWY_H__
   7 #define __LS1012AFRWY_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 #undef CONFIG_SYS_BOARD
  12 #define CONFIG_SYS_BOARD "ls1012afrwy"
  13
  14 /* Board Rev*/
  15 #define BOARD_REV_A_B                   0x0
  16 #define BOARD_REV_C                     0x00080000
  17 #define BOARD_REV_MASK                  0x001A0000
  18 /* DDR */
  19 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  20 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  21 #define SYS_SDRAM_SIZE_512              0x20000000
  22 #define SYS_SDRAM_SIZE_1024             0x40000000
  23 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  24
  25 /* ENV */
  26 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  27
  28 #ifndef CONFIG_SPL_BUILD
  29 #undef BOOT_TARGET_DEVICES
  30 #define BOOT_TARGET_DEVICES(func) \
  31         func(MMC, mmc, 0) \
  32         func(USB, usb, 0) \
  33         func(DHCP, dhcp, na)
  34 #endif
  35
  36 /*  MMC  */
  37 #ifdef CONFIG_MMC
  38 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  39 #endif
  40
  41 #define CONFIG_PCIE1            /* PCIE controller 1 */
  42
  43 #define CONFIG_PCI_SCAN_SHOW
  44
  45 #undef CONFIG_EXTRA_ENV_SETTINGS
  46 #define CONFIG_EXTRA_ENV_SETTINGS               \
  47         "verify=no\0"                           \
  48         "initrd_high=0xffffffffffffffff\0"      \
  49         "fdt_addr=0x00f00000\0"                 \
  50         "kernel_addr=0x01000000\0"              \
  51         "kernel_size_sd=0x16000\0"              \
  52         "kernelhdr_size_sd=0x10\0"              \
  53         "kernel_addr_sd=0x8000\0"               \
  54         "kernelhdr_addr_sd=0x4000\0"            \
  55         "kernelheader_addr=0x1fc000\0"          \
  56         "kernelheader_addr=0x1fc000\0"          \
  57         "scriptaddr=0x80000000\0"               \
  58         "scripthdraddr=0x80080000\0"            \
  59         "fdtheader_addr_r=0x80100000\0"         \
  60         "kernelheader_addr_r=0x80200000\0"      \
  61         "kernelheader_size=0x40000\0"           \
  62         "kernel_addr_r=0x92000000\0"            \
  63         "fdt_addr_r=0x90000000\0"               \
  64         "load_addr=0x92000000\0"                \
  65         "kernel_size=0x2800000\0"               \
  66         "kernelheader_size=0x40000\0"           \
  67         "bootm_size=0x10000000\0"               \
  68         "console=ttyS0,115200\0"                \
  69         "BOARD=ls1012afrwy\0"                   \
  70         BOOTENV                                 \
  71         "boot_scripts=ls1012afrwy_boot.scr\0"   \
  72         "boot_script_hdr=hdr_ls1012afrwy_bs.out\0"      \
  73         "scan_dev_for_boot_part="               \
  74              "part list ${devtype} ${devnum} devplist; "        \
  75              "env exists devplist || setenv devplist 1; "       \
  76              "for distro_bootpart in ${devplist}; do "          \
  77                   "if fstype ${devtype} "                       \
  78                       "${devnum}:${distro_bootpart} "           \
  79                       "bootfstype; then "                       \
  80                       "run scan_dev_for_boot; " \
  81                   "fi; "                        \
  82               "done\0"                          \
  83         "scan_dev_for_boot="                              \
  84                 "echo Scanning ${devtype} "               \
  85                                 "${devnum}:${distro_bootpart}...; "  \
  86                 "for prefix in ${boot_prefixes}; do "     \
  87                         "run scan_dev_for_scripts; "      \
  88                 "done;"                                   \
  89                 "\0"                                      \
  90         "boot_a_script="                                  \
  91                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  92                         "${scriptaddr} ${prefix}${script}; "    \
  93                 "env exists secureboot && load ${devtype} "     \
  94                         "${devnum}:${distro_bootpart} "         \
  95                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
  96                         "env exists secureboot "        \
  97                         "&& esbc_validate ${scripthdraddr};"    \
  98                 "source ${scriptaddr}\0"          \
  99         "sd_bootcmd=pfe stop; echo Trying load from sd card..;"         \
 100                 "mmcinfo; mmc read $load_addr "                 \
 101                 "$kernel_addr_sd $kernel_size_sd ;"             \
 102                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 103                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 104                 " && esbc_validate ${kernelheader_addr_r};"     \
 105                 "bootm $load_addr#$BOARD\0"
 106
 107 #undef CONFIG_BOOTCOMMAND
 108 #ifdef CONFIG_TFABOOT
 109 #undef QSPI_NOR_BOOTCOMMAND
 110 #define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
 111                              "env exists secureboot && esbc_halt;"
 112 #else
 113 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
 114                            "env exists secureboot && esbc_halt;"
 115 #endif
 116
 117 #include <asm/fsl_secure_boot.h>
 118
 119 #include <asm/fsl_secure_boot.h>
 120 #endif /* __LS1012AFRWY_H__ */