include/configs/ls1012afrwy.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 NXP
   4  */
   5
   6 #ifndef __LS1012AFRWY_H__
   7 #define __LS1012AFRWY_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* Board Rev*/
  12 #define BOARD_REV_A_B                   0x0
  13 #define BOARD_REV_C                     0x00080000
  14 #define BOARD_REV_MASK                  0x001A0000
  15 /* DDR */
  16 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  17 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  18 #define SYS_SDRAM_SIZE_512              0x20000000
  19 #define SYS_SDRAM_SIZE_1024             0x40000000
  20 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  21 #define CONFIG_CMD_MEMINFO
  22 #define CONFIG_CMD_MEMTEST
  23 #define CONFIG_SYS_MEMTEST_START        0x80000000
  24 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  25
  26 /* ENV */
  27 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  28 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FSL_QSPI_BASE + \
  29                                 CONFIG_ENV_OFFSET)
  30
  31 #ifndef CONFIG_SPL_BUILD
  32 #undef BOOT_TARGET_DEVICES
  33 #define BOOT_TARGET_DEVICES(func) \
  34         func(MMC, mmc, 0) \
  35         func(USB, usb, 0)
  36 #endif
  37
  38 #undef CONFIG_ENV_OFFSET
  39 #define CONFIG_ENV_OFFSET              0x1D0000
  40 #undef FSL_QSPI_FLASH_SIZE
  41 #define FSL_QSPI_FLASH_SIZE            SZ_16M
  42 #undef CONFIG_ENV_SECT_SIZE
  43 #define CONFIG_ENV_SECT_SIZE            0x10000 /*64 KB*/
  44 #undef CONFIG_ENV_SIZE
  45 #define CONFIG_ENV_SIZE                 0x10000 /*64 KB*/
  46
  47 /*  MMC  */
  48 #ifdef CONFIG_MMC
  49 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  50 #endif
  51
  52 #define CONFIG_PCIE1            /* PCIE controller 1 */
  53
  54 #define CONFIG_PCI_SCAN_SHOW
  55
  56 #undef CONFIG_EXTRA_ENV_SETTINGS
  57 #define CONFIG_EXTRA_ENV_SETTINGS               \
  58         "verify=no\0"                           \
  59         "fdt_high=0xffffffffffffffff\0"         \
  60         "initrd_high=0xffffffffffffffff\0"      \
  61         "fdt_addr=0x00f00000\0"                 \
  62         "kernel_addr=0x01000000\0"              \
  63         "kernel_size_sd=0x16000\0"              \
  64         "kernelhdr_size_sd=0x10\0"              \
  65         "kernel_addr_sd=0x8000\0"               \
  66         "kernelhdr_addr_sd=0x4000\0"            \
  67         "kernelheader_addr=0x1fc000\0"          \
  68         "kernelheader_addr=0x1fc000\0"          \
  69         "scriptaddr=0x80000000\0"               \
  70         "scripthdraddr=0x80080000\0"            \
  71         "fdtheader_addr_r=0x80100000\0"         \
  72         "kernelheader_addr_r=0x80200000\0"      \
  73         "kernelheader_size=0x40000\0"           \
  74         "kernel_addr_r=0x81000000\0"            \
  75         "fdt_addr_r=0x90000000\0"               \
  76         "load_addr=0x96000000\0"                \
  77         "kernel_size=0x2800000\0"               \
  78         "kernelheader_size=0x40000\0"           \
  79         "console=ttyS0,115200\0"                \
  80         BOOTENV                                 \
  81         "boot_scripts=ls1012afrwy_boot.scr\0"   \
  82         "boot_script_hdr=hdr_ls1012afrwy_bs.out\0"      \
  83         "scan_dev_for_boot_part="               \
  84              "part list ${devtype} ${devnum} devplist; "        \
  85              "env exists devplist || setenv devplist 1; "       \
  86              "for distro_bootpart in ${devplist}; do "          \
  87                   "if fstype ${devtype} "                       \
  88                       "${devnum}:${distro_bootpart} "           \
  89                       "bootfstype; then "                       \
  90                       "run scan_dev_for_boot; " \
  91                   "fi; "                        \
  92               "done\0"                          \
  93         "scan_dev_for_boot="                              \
  94                 "echo Scanning ${devtype} "               \
  95                                 "${devnum}:${distro_bootpart}...; "  \
  96                 "for prefix in ${boot_prefixes}; do "     \
  97                         "run scan_dev_for_scripts; "      \
  98                 "done;"                                   \
  99                 "\0"                                      \
 100         "boot_a_script="                                  \
 101                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 102                         "${scriptaddr} ${prefix}${script}; "    \
 103                 "env exists secureboot && load ${devtype} "     \
 104                         "${devnum}:${distro_bootpart} "         \
 105                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 106                         "env exists secureboot "        \
 107                         "&& esbc_validate ${scripthdraddr};"    \
 108                 "source ${scriptaddr}\0"          \
 109         "installer=load mmc 0:2 $load_addr "    \
 110                    "/flex_installer_arm64.itb; "        \
 111                    "bootm $load_addr#$board\0"  \
 112         "qspi_bootcmd=echo Trying load from qspi..;"    \
 113                 "sf probe && sf read $load_addr "       \
 114                 "$kernel_addr $kernel_size; env exists secureboot "     \
 115                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 116                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 117                 "bootm $load_addr#$board\0"     \
 118         "sd_bootcmd=echo Trying load from sd card..;"           \
 119                 "mmcinfo; mmc read $load_addr "                 \
 120                 "$kernel_addr_sd $kernel_size_sd ;"             \
 121                 "env exists secureboot && mmc read $kernelheader_addr_r "\
 122                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 123                 " && esbc_validate ${kernelheader_addr_r};"     \
 124                 "bootm $load_addr#$board\0"
 125
 126 #undef CONFIG_BOOTCOMMAND
 127 #ifdef CONFIG_TFABOOT
 128 #undef QSPI_NOR_BOOTCOMMAND
 129 #define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
 130                              "env exists secureboot && esbc_halt;"
 131 #else
 132 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
 133                            "env exists secureboot && esbc_halt;"
 134 #endif
 135 #define CONFIG_CMD_MEMINFO
 136 #define CONFIG_CMD_MEMTEST
 137 #define CONFIG_SYS_MEMTEST_START        0x80000000
 138 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 139
 140 #include <asm/fsl_secure_boot.h>
 141
 142 #include <asm/fsl_secure_boot.h>
 143 #endif /* __LS1012AFRWY_H__ */