include/configs/ls1012afrdm.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  15 #define CONFIG_NR_DRAM_BANKS            2
  16 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  17 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  18 #define CONFIG_CMD_MEMINFO
  19 #define CONFIG_CMD_MEMTEST
  20 #define CONFIG_SYS_MEMTEST_START        0x80000000
  21 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  22
  23 #ifndef CONFIG_SPL_BUILD
  24 #undef BOOT_TARGET_DEVICES
  25 #define BOOT_TARGET_DEVICES(func) \
  26         func(USB, usb, 0)
  27 #endif
  28
  29 #undef CONFIG_EXTRA_ENV_SETTINGS
  30 #define CONFIG_EXTRA_ENV_SETTINGS               \
  31         "verify=no\0"                           \
  32         "fdt_high=0xffffffffffffffff\0"         \
  33         "initrd_high=0xffffffffffffffff\0"      \
  34         "fdt_addr=0x00f00000\0"                 \
  35         "kernel_addr=0x01000000\0"              \
  36         "scriptaddr=0x80000000\0"               \
  37         "fdtheader_addr_r=0x80100000\0"         \
  38         "kernelheader_addr_r=0x80200000\0"      \
  39         "kernel_addr_r=0x96000000\0"            \
  40         "fdt_addr_r=0x90000000\0"               \
  41         "load_addr=0x96000000\0"                \
  42         "kernel_size=0x2800000\0"               \
  43         "console=ttyS0,115200\0"                \
  44         BOOTENV                                 \
  45         "boot_scripts=ls1012afrdm_boot.scr\0"   \
  46         "scan_dev_for_boot_part="               \
  47              "part list ${devtype} ${devnum} devplist; "        \
  48              "env exists devplist || setenv devplist 1; "       \
  49              "for distro_bootpart in ${devplist}; do "          \
  50                   "if fstype ${devtype} "                       \
  51                       "${devnum}:${distro_bootpart} "           \
  52                       "bootfstype; then "                       \
  53                       "run scan_dev_for_boot; " \
  54                   "fi; "                        \
  55               "done\0"                          \
  56         "scan_dev_for_boot="                              \
  57                 "echo Scanning ${devtype} "               \
  58                                 "${devnum}:${distro_bootpart}...; "  \
  59                 "for prefix in ${boot_prefixes}; do "     \
  60                         "run scan_dev_for_scripts; "      \
  61                 "done;"                                   \
  62                 "\0"                                      \
  63         "installer=load usb 0:2 $load_addr "    \
  64                    "/flex_installer_arm64.itb; "        \
  65                    "bootm $load_addr#$board\0"  \
  66         "qspi_bootcmd=echo Trying load from qspi..;"    \
  67                 "sf probe && sf read $load_addr "       \
  68                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
  69
  70 #undef CONFIG_BOOTCOMMAND
  71 #define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
  72
  73 #define CONFIG_CMD_MEMINFO
  74 #define CONFIG_CMD_MEMTEST
  75 #define CONFIG_SYS_MEMTEST_START        0x80000000
  76 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  77
  78 #endif /* __LS1012ARDB_H__ */