include/configs/ls1012afrdm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __LS1012ARDB_H__
   7 #define __LS1012ARDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  14
  15 #ifndef CONFIG_SPL_BUILD
  16 #undef BOOT_TARGET_DEVICES
  17 #define BOOT_TARGET_DEVICES(func) \
  18         func(USB, usb, 0)
  19 #endif
  20
  21 #undef CONFIG_EXTRA_ENV_SETTINGS
  22 #define CONFIG_EXTRA_ENV_SETTINGS               \
  23         "verify=no\0"                           \
  24         "fdt_high=0xffffffffffffffff\0"         \
  25         "fdt_addr=0x00f00000\0"                 \
  26         "kernel_addr=0x01000000\0"              \
  27         "scriptaddr=0x80000000\0"               \
  28         "fdtheader_addr_r=0x80100000\0"         \
  29         "kernelheader_addr_r=0x80200000\0"      \
  30         "kernel_addr_r=0x96000000\0"            \
  31         "fdt_addr_r=0x90000000\0"               \
  32         "load_addr=0x96000000\0"                \
  33         "kernel_size=0x2800000\0"               \
  34         "bootm_size=0x10000000\0"               \
  35         "console=ttyS0,115200\0"                \
  36         BOOTENV                                 \
  37         "boot_scripts=ls1012afrdm_boot.scr\0"   \
  38         "scan_dev_for_boot_part="               \
  39              "part list ${devtype} ${devnum} devplist; "        \
  40              "env exists devplist || setenv devplist 1; "       \
  41              "for distro_bootpart in ${devplist}; do "          \
  42                   "if fstype ${devtype} "                       \
  43                       "${devnum}:${distro_bootpart} "           \
  44                       "bootfstype; then "                       \
  45                       "run scan_dev_for_boot; " \
  46                   "fi; "                        \
  47               "done\0"                          \
  48         "installer=load usb 0:2 $load_addr "    \
  49                    "/flex_installer_arm64.itb; "        \
  50                    "bootm $load_addr#$board\0"  \
  51         "qspi_bootcmd=echo Trying load from qspi..;"    \
  52                 "sf probe && sf read $load_addr "       \
  53                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
  54
  55 #ifdef CONFIG_TFABOOT
  56 #undef QSPI_NOR_BOOTCOMMAND
  57 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
  58 #endif
  59
  60 #endif /* __LS1012ARDB_H__ */