include/configs/ls1012afrdm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __LS1012ARDB_H__
   7 #define __LS1012ARDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  15 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  16
  17 #ifndef CONFIG_SPL_BUILD
  18 #undef BOOT_TARGET_DEVICES
  19 #define BOOT_TARGET_DEVICES(func) \
  20         func(USB, usb, 0)
  21 #endif
  22
  23 #undef CONFIG_EXTRA_ENV_SETTINGS
  24 #define CONFIG_EXTRA_ENV_SETTINGS               \
  25         "verify=no\0"                           \
  26         "fdt_high=0xffffffffffffffff\0"         \
  27         "fdt_addr=0x00f00000\0"                 \
  28         "kernel_addr=0x01000000\0"              \
  29         "scriptaddr=0x80000000\0"               \
  30         "fdtheader_addr_r=0x80100000\0"         \
  31         "kernelheader_addr_r=0x80200000\0"      \
  32         "kernel_addr_r=0x96000000\0"            \
  33         "fdt_addr_r=0x90000000\0"               \
  34         "load_addr=0x96000000\0"                \
  35         "kernel_size=0x2800000\0"               \
  36         "bootm_size=0x10000000\0"               \
  37         "console=ttyS0,115200\0"                \
  38         BOOTENV                                 \
  39         "boot_scripts=ls1012afrdm_boot.scr\0"   \
  40         "scan_dev_for_boot_part="               \
  41              "part list ${devtype} ${devnum} devplist; "        \
  42              "env exists devplist || setenv devplist 1; "       \
  43              "for distro_bootpart in ${devplist}; do "          \
  44                   "if fstype ${devtype} "                       \
  45                       "${devnum}:${distro_bootpart} "           \
  46                       "bootfstype; then "                       \
  47                       "run scan_dev_for_boot; " \
  48                   "fi; "                        \
  49               "done\0"                          \
  50         "scan_dev_for_boot="                              \
  51                 "echo Scanning ${devtype} "               \
  52                                 "${devnum}:${distro_bootpart}...; "  \
  53                 "for prefix in ${boot_prefixes}; do "     \
  54                         "run scan_dev_for_scripts; "      \
  55                 "done;"                                   \
  56                 "\0"                                      \
  57         "installer=load usb 0:2 $load_addr "    \
  58                    "/flex_installer_arm64.itb; "        \
  59                    "bootm $load_addr#$board\0"  \
  60         "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
  61                 "sf probe && sf read $load_addr "       \
  62                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
  63
  64 #undef CONFIG_BOOTCOMMAND
  65 #ifdef CONFIG_TFABOOT
  66 #undef QSPI_NOR_BOOTCOMMAND
  67 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
  68 #else
  69 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
  70 #endif
  71
  72 #endif /* __LS1012ARDB_H__ */