include/configs/ls1012afrdm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  * Copyright 2021 NXP
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  14
  15 #undef BOOT_TARGET_DEVICES
  16 #define BOOT_TARGET_DEVICES(func) \
  17         func(USB, usb, 0)
  18
  19 #undef CONFIG_EXTRA_ENV_SETTINGS
  20 #define CONFIG_EXTRA_ENV_SETTINGS               \
  21         "verify=no\0"                           \
  22         "fdt_high=0xffffffffffffffff\0"         \
  23         "kernel_addr=0x01000000\0"              \
  24         "scriptaddr=0x80000000\0"               \
  25         "fdtheader_addr_r=0x80100000\0"         \
  26         "kernelheader_addr_r=0x80200000\0"      \
  27         "kernel_addr_r=0x96000000\0"            \
  28         "fdt_addr_r=0x90000000\0"               \
  29         "load_addr=0x96000000\0"                \
  30         "kernel_size=0x2800000\0"               \
  31         "bootm_size=0x10000000\0"               \
  32         "console=ttyS0,115200\0"                \
  33         BOOTENV                                 \
  34         "boot_scripts=ls1012afrdm_boot.scr\0"   \
  35         "scan_dev_for_boot_part="               \
  36              "part list ${devtype} ${devnum} devplist; "        \
  37              "env exists devplist || setenv devplist 1; "       \
  38              "for distro_bootpart in ${devplist}; do "          \
  39                   "if fstype ${devtype} "                       \
  40                       "${devnum}:${distro_bootpart} "           \
  41                       "bootfstype; then "                       \
  42                       "run scan_dev_for_boot; " \
  43                   "fi; "                        \
  44               "done\0"                          \
  45         "installer=load usb 0:2 $load_addr "    \
  46                    "/flex_installer_arm64.itb; "        \
  47                    "bootm $load_addr#$board\0"  \
  48         "qspi_bootcmd=echo Trying load from qspi..;"    \
  49                 "sf probe && sf read $load_addr "       \
  50                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
  51
  52 #ifdef CONFIG_TFABOOT
  53 #undef QSPI_NOR_BOOTCOMMAND
  54 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
  55 #endif
  56
  57 #endif /* __LS1012ARDB_H__ */