include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #define CONFIG_GICV2
  10
  11 #include <asm/arch/config.h>
  12 #include <asm/arch/stream_id_lsch2.h>
  13 #include <linux/sizes.h>
  14
  15 #define CONFIG_SYS_CLK_FREQ             125000000
  16
  17 #define CONFIG_SKIP_LOWLEVEL_INIT
  18
  19 #ifdef CONFIG_TFABOOT
  20 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  21 #else
  22 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  23 #endif
  24 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  25
  26 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  28 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  29 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  30
  31 /* Generic Timer Definitions */
  32 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  33
  34 /* CSU */
  35 #define CONFIG_LAYERSCAPE_NS_ACCESS
  36
  37 /* Size of malloc() pool */
  38 #define CONFIG_SYS_MALLOC_LEN           (5 * SZ_1M)
  39
  40 /* PFE */
  41 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  42 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
  43
  44 /*SPI device */
  45 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  46
  47 /* SATA */
  48 #define CONFIG_SCSI_AHCI_PLAT
  49
  50 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  51
  52 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  53 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  54 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  55                                                 CONFIG_SYS_SCSI_MAX_LUN)
  56
  57 /* I2C */
  58
  59 /* GPIO */
  60 #ifdef CONFIG_DM_GPIO
  61 #ifndef CONFIG_MPC8XXX_GPIO
  62 #define CONFIG_MPC8XXX_GPIO
  63 #endif
  64 #endif
  65
  66 #define CONFIG_SYS_NS16550_SERIAL
  67 #define CONFIG_SYS_NS16550_REG_SIZE     1
  68 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  69
  70 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  71
  72 #define CONFIG_SYS_HZ                   1000
  73
  74 #define CONFIG_HWCONFIG
  75 #define HWCONFIG_BUFFER_SIZE            128
  76
  77 #ifndef CONFIG_SPL_BUILD
  78 #define BOOT_TARGET_DEVICES(func) \
  79         func(MMC, mmc, 0) \
  80         func(USB, usb, 0) \
  81         func(SCSI, scsi, 0) \
  82         func(DHCP, dhcp, na)
  83 #include <config_distro_bootcmd.h>
  84 #endif
  85
  86 /* Initial environment variables */
  87 #define CONFIG_EXTRA_ENV_SETTINGS               \
  88         "verify=no\0"                           \
  89         "loadaddr=0x80100000\0"                 \
  90         "kernel_addr=0x100000\0"                \
  91         "initrd_high=0xffffffffffffffff\0"      \
  92         "kernel_start=0x1000000\0"              \
  93         "kernel_load=0xa0000000\0"              \
  94         "kernel_size=0x2800000\0"               \
  95         "bootm_size=0x10000000\0"               \
  96
  97 #undef CONFIG_BOOTCOMMAND
  98 #ifdef CONFIG_TFABOOT
  99 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
 100                                 "$kernel_start $kernel_size && "\
 101                                 "bootm $kernel_load"
 102 #else
 103 #define CONFIG_BOOTCOMMAND      "sf probe 0:0; sf read $kernel_load "\
 104                                 "$kernel_start $kernel_size && "\
 105                                 "bootm $kernel_load"
 106 #endif
 107
 108 /* Monitor Command Prompt */
 109 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 110 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 111
 112 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 113
 114 #include <asm/arch/soc.h>
 115
 116 #endif /* __LS1012A_COMMON_H */