include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #define CONFIG_GICV2
  10
  11 #include <asm/arch/config.h>
  12 #include <asm/arch/stream_id_lsch2.h>
  13
  14 #define CONFIG_SYS_CLK_FREQ             125000000
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT
  17
  18 #ifdef CONFIG_TFABOOT
  19 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  20 #else
  21 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  22 #endif
  23 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  24
  25 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  27 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  28 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  29
  30 /* Generic Timer Definitions */
  31 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  32
  33 /* CSU */
  34 #define CONFIG_LAYERSCAPE_NS_ACCESS
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
  38
  39 /*SPI device */
  40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
  41 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  42 #define CONFIG_SPI_FLASH_SPANSION
  43 #define CONFIG_FSL_SPI_INTERFACE
  44 #define CONFIG_SF_DATAFLASH
  45
  46 #define CONFIG_FSL_QSPI
  47 #define QSPI0_AMBA_BASE         0x40000000
  48 #define CONFIG_SPI_FLASH_SPANSION
  49
  50 #define FSL_QSPI_FLASH_SIZE             SZ_64M
  51 #define FSL_QSPI_FLASH_NUM              2
  52
  53 /*
  54  * Environment
  55  */
  56 #define CONFIG_ENV_OVERWRITE
  57
  58 #define CONFIG_ENV_SIZE                 0x40000          /* 256KB */
  59 #ifdef CONFIG_TFABOOT
  60 #define CONFIG_ENV_OFFSET               0x500000        /* 5MB */
  61 #else
  62 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
  63 #endif
  64 #define CONFIG_ENV_SECT_SIZE            0x40000
  65 #endif
  66
  67 /* SATA */
  68 #define CONFIG_SCSI_AHCI_PLAT
  69
  70 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  71
  72 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  73 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  74 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  75                                                 CONFIG_SYS_SCSI_MAX_LUN)
  76
  77 /* I2C */
  78 #define CONFIG_SYS_I2C
  79
  80 #define CONFIG_SYS_NS16550_SERIAL
  81 #define CONFIG_SYS_NS16550_REG_SIZE     1
  82 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  83
  84 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  85
  86 #define CONFIG_SYS_HZ                   1000
  87
  88 #define CONFIG_HWCONFIG
  89 #define HWCONFIG_BUFFER_SIZE            128
  90
  91 #ifndef CONFIG_SPL_BUILD
  92 #define BOOT_TARGET_DEVICES(func) \
  93         func(MMC, mmc, 0) \
  94         func(USB, usb, 0) \
  95         func(SCSI, scsi, 0) \
  96         func(DHCP, dhcp, na)
  97 #include <config_distro_bootcmd.h>
  98 #endif
  99
 100 /* Initial environment variables */
 101 #define CONFIG_EXTRA_ENV_SETTINGS               \
 102         "verify=no\0"                           \
 103         "loadaddr=0x80100000\0"                 \
 104         "kernel_addr=0x100000\0"                \
 105         "fdt_high=0xffffffffffffffff\0"         \
 106         "initrd_high=0xffffffffffffffff\0"      \
 107         "kernel_start=0x1000000\0"              \
 108         "kernel_load=0xa0000000\0"              \
 109         "kernel_size=0x2800000\0"               \
 110
 111 #undef CONFIG_BOOTCOMMAND
 112 #ifdef CONFIG_TFABOOT
 113 #define QSPI_NOR_BOOTCOMMAND    "pfe stop; sf probe 0:0; sf read $kernel_load "\
 114                                 "$kernel_start $kernel_size && "\
 115                                 "bootm $kernel_load"
 116 #else
 117 #define CONFIG_BOOTCOMMAND      "pfe stop; sf probe 0:0; sf read $kernel_load "\
 118                                 "$kernel_start $kernel_size && "\
 119                                 "bootm $kernel_load"
 120 #endif
 121
 122 /* Monitor Command Prompt */
 123 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 124 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 125
 126 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 127
 128 #include <asm/arch/soc.h>
 129
 130 #endif /* __LS1012A_COMMON_H */