include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #include <asm/arch/config.h>
  10 #include <asm/arch/stream_id_lsch2.h>
  11 #include <linux/sizes.h>
  12
  13 #define CONFIG_SYS_CLK_FREQ             125000000
  14
  15 #ifdef CONFIG_TFABOOT
  16 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  17 #else
  18 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  19 #endif
  20
  21 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  22 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  23 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  24 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  25
  26 /* Generic Timer Definitions */
  27 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  28
  29 /* CSU */
  30 #define CONFIG_LAYERSCAPE_NS_ACCESS
  31
  32 /* PFE */
  33 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  34 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
  35
  36 /*SPI device */
  37 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  38
  39 /* SATA */
  40 #define CONFIG_SCSI_AHCI_PLAT
  41
  42 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  43
  44 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  45 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  46 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  47                                                 CONFIG_SYS_SCSI_MAX_LUN)
  48
  49 /* I2C */
  50
  51 /* GPIO */
  52 #ifdef CONFIG_DM_GPIO
  53 #ifndef CONFIG_MPC8XXX_GPIO
  54 #define CONFIG_MPC8XXX_GPIO
  55 #endif
  56 #endif
  57
  58 #define CONFIG_SYS_NS16550_SERIAL
  59 #define CONFIG_SYS_NS16550_REG_SIZE     1
  60 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  61
  62 #define CONFIG_SYS_HZ                   1000
  63
  64 #define CONFIG_HWCONFIG
  65 #define HWCONFIG_BUFFER_SIZE            128
  66
  67 #ifndef CONFIG_SPL_BUILD
  68 #define BOOT_TARGET_DEVICES(func) \
  69         func(MMC, mmc, 0) \
  70         func(USB, usb, 0) \
  71         func(SCSI, scsi, 0) \
  72         func(DHCP, dhcp, na)
  73 #include <config_distro_bootcmd.h>
  74 #endif
  75
  76 /* Initial environment variables */
  77 #define CONFIG_EXTRA_ENV_SETTINGS               \
  78         "verify=no\0"                           \
  79         "loadaddr=0x80100000\0"                 \
  80         "kernel_addr=0x100000\0"                \
  81         "initrd_high=0xffffffffffffffff\0"      \
  82         "kernel_start=0x1000000\0"              \
  83         "kernel_load=0xa0000000\0"              \
  84         "kernel_size=0x2800000\0"               \
  85         "bootm_size=0x10000000\0"               \
  86
  87 #undef CONFIG_BOOTCOMMAND
  88 #ifdef CONFIG_TFABOOT
  89 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
  90                                 "$kernel_start $kernel_size && "\
  91                                 "bootm $kernel_load"
  92 #else
  93 #define CONFIG_BOOTCOMMAND      "sf probe 0:0; sf read $kernel_load "\
  94                                 "$kernel_start $kernel_size && "\
  95                                 "bootm $kernel_load"
  96 #endif
  97
  98 /* Monitor Command Prompt */
  99 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 100 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 101
 102 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 103
 104 #include <asm/arch/soc.h>
 105
 106 #endif /* __LS1012A_COMMON_H */