include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #define CONFIG_GICV2
  10
  11 #include <asm/arch/config.h>
  12 #include <asm/arch/stream_id_lsch2.h>
  13 #include <linux/sizes.h>
  14
  15 #define CONFIG_SYS_CLK_FREQ             125000000
  16
  17 #define CONFIG_SKIP_LOWLEVEL_INIT
  18
  19 #ifdef CONFIG_TFABOOT
  20 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  21 #else
  22 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  23 #endif
  24 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  25
  26 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  28 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  29 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  30
  31 /* Generic Timer Definitions */
  32 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  33
  34 /* CSU */
  35 #define CONFIG_LAYERSCAPE_NS_ACCESS
  36
  37 /* Size of malloc() pool */
  38 #define CONFIG_SYS_MALLOC_LEN           (5 * SZ_1M)
  39
  40 /* PFE */
  41 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  42 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
  43
  44 /*SPI device */
  45 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  46
  47 /* SATA */
  48 #define CONFIG_SCSI_AHCI_PLAT
  49
  50 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  51
  52 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  53 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  54 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  55                                                 CONFIG_SYS_SCSI_MAX_LUN)
  56
  57 /* I2C */
  58 #if !CONFIG_IS_ENABLED(DM_I2C)
  59 #define CONFIG_SYS_I2C
  60 #else
  61 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
  62 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
  63 #endif
  64
  65 /* GPIO */
  66 #ifdef CONFIG_DM_GPIO
  67 #ifndef CONFIG_MPC8XXX_GPIO
  68 #define CONFIG_MPC8XXX_GPIO
  69 #endif
  70 #endif
  71
  72 #define CONFIG_SYS_NS16550_SERIAL
  73 #define CONFIG_SYS_NS16550_REG_SIZE     1
  74 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  75
  76 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  77
  78 #define CONFIG_SYS_HZ                   1000
  79
  80 #define CONFIG_HWCONFIG
  81 #define HWCONFIG_BUFFER_SIZE            128
  82
  83 #ifndef CONFIG_SPL_BUILD
  84 #define BOOT_TARGET_DEVICES(func) \
  85         func(MMC, mmc, 0) \
  86         func(USB, usb, 0) \
  87         func(SCSI, scsi, 0) \
  88         func(DHCP, dhcp, na)
  89 #include <config_distro_bootcmd.h>
  90 #endif
  91
  92 /* Initial environment variables */
  93 #define CONFIG_EXTRA_ENV_SETTINGS               \
  94         "verify=no\0"                           \
  95         "loadaddr=0x80100000\0"                 \
  96         "kernel_addr=0x100000\0"                \
  97         "initrd_high=0xffffffffffffffff\0"      \
  98         "kernel_start=0x1000000\0"              \
  99         "kernel_load=0xa0000000\0"              \
 100         "kernel_size=0x2800000\0"               \
 101         "bootm_size=0x10000000\0"               \
 102
 103 #undef CONFIG_BOOTCOMMAND
 104 #ifdef CONFIG_TFABOOT
 105 #define QSPI_NOR_BOOTCOMMAND    "pfe stop; sf probe 0:0; sf read $kernel_load "\
 106                                 "$kernel_start $kernel_size && "\
 107                                 "bootm $kernel_load"
 108 #else
 109 #define CONFIG_BOOTCOMMAND      "pfe stop; sf probe 0:0; sf read $kernel_load "\
 110                                 "$kernel_start $kernel_size && "\
 111                                 "bootm $kernel_load"
 112 #endif
 113
 114 /* Monitor Command Prompt */
 115 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 116 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 117
 118 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 119
 120 #include <asm/arch/soc.h>
 121
 122 #endif /* __LS1012A_COMMON_H */