1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2016 Freescale Semiconductor
6 #ifndef __LS1012A_COMMON_H
7 #define __LS1012A_COMMON_H
11 #include <asm/arch/config.h>
12 #include <asm/arch/stream_id_lsch2.h>
14 #define CONFIG_SYS_CLK_FREQ 125000000
16 #define CONFIG_SKIP_LOWLEVEL_INIT
19 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
23 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
27 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
28 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
30 /* Generic Timer Definitions */
31 #define COUNTER_FREQUENCY 25000000 /* 25MHz */
34 #define CONFIG_LAYERSCAPE_NS_ACCESS
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
41 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
42 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
43 #define CONFIG_ENV_SPI_BUS 0
44 #define CONFIG_ENV_SPI_CS 0
45 #define CONFIG_ENV_SPI_MAX_HZ 1000000
46 #define CONFIG_ENV_SPI_MODE 0x03
47 #define CONFIG_SPI_FLASH_SPANSION
48 #define CONFIG_FSL_SPI_INTERFACE
49 #define CONFIG_SF_DATAFLASH
51 #define CONFIG_FSL_QSPI
52 #define QSPI0_AMBA_BASE 0x40000000
53 #define CONFIG_SPI_FLASH_SPANSION
55 #define FSL_QSPI_FLASH_SIZE SZ_64M
56 #define FSL_QSPI_FLASH_NUM 2
61 #define CONFIG_ENV_OVERWRITE
63 #define CONFIG_ENV_SIZE 0x40000 /* 256KB */
65 #define CONFIG_ENV_OFFSET 0x500000 /* 5MB */
67 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
69 #define CONFIG_ENV_SECT_SIZE 0x40000
73 #define CONFIG_SCSI_AHCI_PLAT
75 #define CONFIG_SYS_SATA AHCI_BASE_ADDR
77 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
78 #define CONFIG_SYS_SCSI_MAX_LUN 1
79 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
80 CONFIG_SYS_SCSI_MAX_LUN)
83 #define CONFIG_SYS_I2C
85 #define CONFIG_SYS_NS16550_SERIAL
86 #define CONFIG_SYS_NS16550_REG_SIZE 1
87 #define CONFIG_SYS_NS16550_CLK (get_serial_clock())
89 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
91 #define CONFIG_SYS_HZ 1000
93 #define CONFIG_HWCONFIG
94 #define HWCONFIG_BUFFER_SIZE 128
96 #ifndef CONFIG_SPL_BUILD
97 #define BOOT_TARGET_DEVICES(func) \
101 #include <config_distro_bootcmd.h>
104 /* Initial environment variables */
105 #define CONFIG_EXTRA_ENV_SETTINGS \
107 "loadaddr=0x80100000\0" \
108 "kernel_addr=0x100000\0" \
109 "fdt_high=0xffffffffffffffff\0" \
110 "initrd_high=0xffffffffffffffff\0" \
111 "kernel_start=0x1000000\0" \
112 "kernel_load=0xa0000000\0" \
113 "kernel_size=0x2800000\0" \
115 #undef CONFIG_BOOTCOMMAND
116 #ifdef CONFIG_TFABOOT
117 #define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
118 "$kernel_start $kernel_size && "\
121 #define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
122 "$kernel_start $kernel_size && "\
126 /* Monitor Command Prompt */
127 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
128 #define CONFIG_SYS_MAXARGS 64 /* max command args */
130 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
132 #include <asm/arch/soc.h>
134 #endif /* __LS1012A_COMMON_H */