include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #include <asm/arch/config.h>
  10 #include <asm/arch/stream_id_lsch2.h>
  11 #include <linux/sizes.h>
  12
  13 #define CONFIG_SYS_CLK_FREQ             125000000
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT
  16
  17 #ifdef CONFIG_TFABOOT
  18 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  19 #else
  20 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  21 #endif
  22
  23 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  24 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  25 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  26 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  27
  28 /* Generic Timer Definitions */
  29 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  30
  31 /* CSU */
  32 #define CONFIG_LAYERSCAPE_NS_ACCESS
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (5 * SZ_1M)
  36
  37 /* PFE */
  38 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  39 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
  40
  41 /*SPI device */
  42 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  43
  44 /* SATA */
  45 #define CONFIG_SCSI_AHCI_PLAT
  46
  47 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  48
  49 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  50 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  51 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  52                                                 CONFIG_SYS_SCSI_MAX_LUN)
  53
  54 /* I2C */
  55
  56 /* GPIO */
  57 #ifdef CONFIG_DM_GPIO
  58 #ifndef CONFIG_MPC8XXX_GPIO
  59 #define CONFIG_MPC8XXX_GPIO
  60 #endif
  61 #endif
  62
  63 #define CONFIG_SYS_NS16550_SERIAL
  64 #define CONFIG_SYS_NS16550_REG_SIZE     1
  65 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  66
  67 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  68
  69 #define CONFIG_SYS_HZ                   1000
  70
  71 #define CONFIG_HWCONFIG
  72 #define HWCONFIG_BUFFER_SIZE            128
  73
  74 #ifndef CONFIG_SPL_BUILD
  75 #define BOOT_TARGET_DEVICES(func) \
  76         func(MMC, mmc, 0) \
  77         func(USB, usb, 0) \
  78         func(SCSI, scsi, 0) \
  79         func(DHCP, dhcp, na)
  80 #include <config_distro_bootcmd.h>
  81 #endif
  82
  83 /* Initial environment variables */
  84 #define CONFIG_EXTRA_ENV_SETTINGS               \
  85         "verify=no\0"                           \
  86         "loadaddr=0x80100000\0"                 \
  87         "kernel_addr=0x100000\0"                \
  88         "initrd_high=0xffffffffffffffff\0"      \
  89         "kernel_start=0x1000000\0"              \
  90         "kernel_load=0xa0000000\0"              \
  91         "kernel_size=0x2800000\0"               \
  92         "bootm_size=0x10000000\0"               \
  93
  94 #undef CONFIG_BOOTCOMMAND
  95 #ifdef CONFIG_TFABOOT
  96 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
  97                                 "$kernel_start $kernel_size && "\
  98                                 "bootm $kernel_load"
  99 #else
 100 #define CONFIG_BOOTCOMMAND      "sf probe 0:0; sf read $kernel_load "\
 101                                 "$kernel_start $kernel_size && "\
 102                                 "bootm $kernel_load"
 103 #endif
 104
 105 /* Monitor Command Prompt */
 106 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 107 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 108
 109 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 110
 111 #include <asm/arch/soc.h>
 112
 113 #endif /* __LS1012A_COMMON_H */