1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2016 Freescale Semiconductor
6 #ifndef __LS1012A_COMMON_H
7 #define __LS1012A_COMMON_H
11 #include <asm/arch/config.h>
12 #include <asm/arch/stream_id_lsch2.h>
14 #define CONFIG_SYS_CLK_FREQ 125000000
16 #define CONFIG_SKIP_LOWLEVEL_INIT
19 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
21 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
23 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
27 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
28 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
30 /* Generic Timer Definitions */
31 #define COUNTER_FREQUENCY 25000000 /* 25MHz */
34 #define CONFIG_LAYERSCAPE_NS_ACCESS
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
40 #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000
41 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x300000
44 #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000
47 #define CONFIG_SCSI_AHCI_PLAT
49 #define CONFIG_SYS_SATA AHCI_BASE_ADDR
51 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
52 #define CONFIG_SYS_SCSI_MAX_LUN 1
53 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
54 CONFIG_SYS_SCSI_MAX_LUN)
58 #define CONFIG_SYS_I2C
60 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
61 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
64 #define CONFIG_SYS_NS16550_SERIAL
65 #define CONFIG_SYS_NS16550_REG_SIZE 1
66 #define CONFIG_SYS_NS16550_CLK (get_serial_clock())
68 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
70 #define CONFIG_SYS_HZ 1000
72 #define CONFIG_HWCONFIG
73 #define HWCONFIG_BUFFER_SIZE 128
75 #ifndef CONFIG_SPL_BUILD
76 #define BOOT_TARGET_DEVICES(func) \
81 #include <config_distro_bootcmd.h>
84 /* Initial environment variables */
85 #define CONFIG_EXTRA_ENV_SETTINGS \
87 "loadaddr=0x80100000\0" \
88 "kernel_addr=0x100000\0" \
89 "initrd_high=0xffffffffffffffff\0" \
90 "kernel_start=0x1000000\0" \
91 "kernel_load=0xa0000000\0" \
92 "kernel_size=0x2800000\0" \
93 "bootm_size=0x10000000\0" \
95 #undef CONFIG_BOOTCOMMAND
97 #define QSPI_NOR_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
98 "$kernel_start $kernel_size && "\
101 #define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
102 "$kernel_start $kernel_size && "\
106 /* Monitor Command Prompt */
107 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
108 #define CONFIG_SYS_MAXARGS 64 /* max command args */
110 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
112 #include <asm/arch/soc.h>
114 #endif /* __LS1012A_COMMON_H */