include/configs/ls1012a_common.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1012A_COMMON_H
   8 #define __LS1012A_COMMON_H
   9
  10 #define CONFIG_FSL_LAYERSCAPE
  11 #define CONFIG_FSL_LSCH2
  12 #define CONFIG_GICV2
  13
  14 #define CONFIG_SYS_HAS_SERDES
  15
  16 #include <asm/arch/config.h>
  17 #define CONFIG_SYS_NO_FLASH
  18
  19 #define CONFIG_SUPPORT_RAW_INITRD
  20
  21 #define CONFIG_DISPLAY_BOARDINFO_LATE
  22
  23 #define CONFIG_SYS_TEXT_BASE            0x40100000
  24
  25 #define CONFIG_SYS_FSL_CLK
  26 #define CONFIG_SYS_CLK_FREQ             100000000
  27 #define CONFIG_DDR_CLK_FREQ             125000000
  28
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30 #define CONFIG_BOARD_EARLY_INIT_F       1
  31
  32 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  33 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  34
  35 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  36 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  37 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  38
  39 /* Generic Timer Definitions */
  40 #define COUNTER_FREQUENCY               CONFIG_SYS_CLK_FREQ/4   /* 25MHz */
  41
  42 /* CSU */
  43 #define CONFIG_LAYERSCAPE_NS_ACCESS
  44
  45 /* Size of malloc() pool */
  46 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
  47
  48 /*SPI device */
  49 #ifdef CONFIG_QSPI_BOOT
  50 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
  51 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  52 #define CONFIG_ENV_SPI_BUS              0
  53 #define CONFIG_ENV_SPI_CS               0
  54 #define CONFIG_ENV_SPI_MAX_HZ           1000000
  55 #define CONFIG_ENV_SPI_MODE             0x03
  56 #define CONFIG_SPI_FLASH_SPANSION
  57 #define CONFIG_FSL_SPI_INTERFACE
  58 #define CONFIG_SF_DATAFLASH
  59
  60 #define CONFIG_FSL_QSPI
  61 #define QSPI0_AMBA_BASE         0x40000000
  62 #define CONFIG_SPI_FLASH_SPANSION
  63 #define CONFIG_SPI_FLASH_BAR
  64
  65 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  66 #define FSL_QSPI_FLASH_NUM              2
  67
  68 /*
  69  * Environment
  70  */
  71 #define CONFIG_ENV_OVERWRITE
  72
  73 #define CONFIG_ENV_IS_IN_SPI_FLASH
  74 #define CONFIG_ENV_SIZE                 0x40000          /* 256KB */
  75 #define CONFIG_ENV_OFFSET               0x200000        /* 2MB */
  76 #define CONFIG_ENV_SECT_SIZE            0x40000
  77 #endif
  78
  79 /* I2C */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_MXC
  82 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  83 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  84
  85 #define CONFIG_CONS_INDEX       1
  86 #define CONFIG_SYS_NS16550_SERIAL
  87 #define CONFIG_SYS_NS16550_REG_SIZE     1
  88 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
  89
  90 #define CONFIG_BAUDRATE                 115200
  91 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  92
  93 /* Command line configuration */
  94 #define CONFIG_CMD_ENV
  95 #undef CONFIG_CMD_IMLS
  96
  97 #define CONFIG_ARCH_EARLY_INIT_R
  98
  99 #define CONFIG_SYS_HZ                   1000
 100
 101 #define CONFIG_HWCONFIG
 102 #define HWCONFIG_BUFFER_SIZE            128
 103
 104 /* Initial environment variables */
 105 #define CONFIG_EXTRA_ENV_SETTINGS               \
 106         "initrd_high=0xffffffff\0"              \
 107         "verify=no\0"                           \
 108         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 109         "loadaddr=0x80100000\0"                 \
 110         "kernel_addr=0x100000\0"                \
 111         "ramdisk_addr=0x800000\0"               \
 112         "ramdisk_size=0x2000000\0"              \
 113         "fdt_high=0xffffffffffffffff\0"         \
 114         "initrd_high=0xffffffffffffffff\0"      \
 115         "kernel_start=0xa00000\0"               \
 116         "kernel_load=0xa0000000\0"              \
 117         "kernel_size=0x2800000\0"               \
 118         "console=ttyAMA0,38400n8\0"
 119
 120 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/ram0 " \
 121                                 "earlycon=uart8250,mmio,0x21c0500"
 122 #define CONFIG_BOOTCOMMAND              "sf probe 0:0; sf read $kernel_load "\
 123                                         "$kernel_start $kernel_size && "\
 124                                         "bootm $kernel_load"
 125
 126 /* Monitor Command Prompt */
 127 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 128 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 129                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 130 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 131 #define CONFIG_SYS_LONGHELP
 132 #define CONFIG_CMDLINE_EDITING          1
 133 #define CONFIG_AUTO_COMPLETE
 134 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 135
 136 #define CONFIG_PANIC_HANG
 137 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 138
 139 #include <asm/fsl_secure_boot.h>
 140
 141 #endif /* __LS1012A_COMMON_H */