include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #include <asm/arch/config.h>
  10 #include <asm/arch/stream_id_lsch2.h>
  11 #include <linux/sizes.h>
  12
  13 #ifdef CONFIG_TFABOOT
  14 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  15 #else
  16 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  17 #endif
  18
  19 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  20 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  21 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  22 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  23
  24 /* Generic Timer Definitions */
  25 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  26
  27 /* CSU */
  28 #define CONFIG_LAYERSCAPE_NS_ACCESS
  29
  30 /*SPI device */
  31 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  32
  33 /* SATA */
  34
  35 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  36
  37 /* I2C */
  38
  39 /* GPIO */
  40
  41 #define CONFIG_SYS_NS16550_SERIAL
  42 #define CONFIG_SYS_NS16550_REG_SIZE     1
  43 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  44
  45 #define CONFIG_HWCONFIG
  46 #define HWCONFIG_BUFFER_SIZE            128
  47
  48 #ifndef CONFIG_SPL_BUILD
  49 #define BOOT_TARGET_DEVICES(func) \
  50         func(MMC, mmc, 0) \
  51         func(USB, usb, 0) \
  52         func(SCSI, scsi, 0) \
  53         func(DHCP, dhcp, na)
  54 #include <config_distro_bootcmd.h>
  55 #endif
  56
  57 /* Initial environment variables */
  58 #define CONFIG_EXTRA_ENV_SETTINGS               \
  59         "verify=no\0"                           \
  60         "loadaddr=0x80100000\0"                 \
  61         "kernel_addr=0x100000\0"                \
  62         "initrd_high=0xffffffffffffffff\0"      \
  63         "kernel_start=0x1000000\0"              \
  64         "kernel_load=0xa0000000\0"              \
  65         "kernel_size=0x2800000\0"               \
  66         "bootm_size=0x10000000\0"               \
  67
  68 #ifdef CONFIG_TFABOOT
  69 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
  70                                 "$kernel_start $kernel_size && "\
  71                                 "bootm $kernel_load"
  72 #endif
  73
  74 /* Monitor Command Prompt */
  75 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
  76 #define CONFIG_SYS_MAXARGS              64      /* max command args */
  77
  78 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
  79
  80 #include <asm/arch/soc.h>
  81
  82 #endif /* __LS1012A_COMMON_H */