include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #define CONFIG_GICV2
  10
  11 #include <asm/arch/config.h>
  12 #include <asm/arch/stream_id_lsch2.h>
  13
  14 #define CONFIG_SYS_CLK_FREQ             125000000
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT
  17
  18 #ifdef CONFIG_TFABOOT
  19 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  20 #else
  21 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  22 #endif
  23 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
  24
  25 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  26 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  27 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  28 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  29
  30 /* Generic Timer Definitions */
  31 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  32
  33 /* CSU */
  34 #define CONFIG_LAYERSCAPE_NS_ACCESS
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
  38
  39 /*SPI device */
  40 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
  41 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
  42 #define CONFIG_SPI_FLASH_SPANSION
  43 #define CONFIG_FSL_SPI_INTERFACE
  44 #define CONFIG_SF_DATAFLASH
  45
  46 #define QSPI0_AMBA_BASE         0x40000000
  47 #define CONFIG_SPI_FLASH_SPANSION
  48
  49 #define FSL_QSPI_FLASH_SIZE             SZ_64M
  50 #define FSL_QSPI_FLASH_NUM              2
  51
  52 /*
  53  * Environment
  54  */
  55 #define CONFIG_ENV_OVERWRITE
  56 #endif
  57
  58 /* SATA */
  59 #define CONFIG_SCSI_AHCI_PLAT
  60
  61 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  62
  63 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  64 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  65 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  66                                                 CONFIG_SYS_SCSI_MAX_LUN)
  67
  68 /* I2C */
  69 #ifndef CONFIG_DM_I2C
  70 #define CONFIG_SYS_I2C
  71 #else
  72 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
  73 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
  74 #endif
  75
  76 #define CONFIG_SYS_NS16550_SERIAL
  77 #define CONFIG_SYS_NS16550_REG_SIZE     1
  78 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  79
  80 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  81
  82 #define CONFIG_SYS_HZ                   1000
  83
  84 #define CONFIG_HWCONFIG
  85 #define HWCONFIG_BUFFER_SIZE            128
  86
  87 #ifndef CONFIG_SPL_BUILD
  88 #define BOOT_TARGET_DEVICES(func) \
  89         func(MMC, mmc, 0) \
  90         func(USB, usb, 0) \
  91         func(SCSI, scsi, 0) \
  92         func(DHCP, dhcp, na)
  93 #include <config_distro_bootcmd.h>
  94 #endif
  95
  96 /* Initial environment variables */
  97 #define CONFIG_EXTRA_ENV_SETTINGS               \
  98         "verify=no\0"                           \
  99         "loadaddr=0x80100000\0"                 \
 100         "kernel_addr=0x100000\0"                \
 101         "fdt_high=0xffffffffffffffff\0"         \
 102         "initrd_high=0xffffffffffffffff\0"      \
 103         "kernel_start=0x1000000\0"              \
 104         "kernel_load=0xa0000000\0"              \
 105         "kernel_size=0x2800000\0"               \
 106
 107 #undef CONFIG_BOOTCOMMAND
 108 #ifdef CONFIG_TFABOOT
 109 #define QSPI_NOR_BOOTCOMMAND    "pfe stop; sf probe 0:0; sf read $kernel_load "\
 110                                 "$kernel_start $kernel_size && "\
 111                                 "bootm $kernel_load"
 112 #else
 113 #define CONFIG_BOOTCOMMAND      "pfe stop; sf probe 0:0; sf read $kernel_load "\
 114                                 "$kernel_start $kernel_size && "\
 115                                 "bootm $kernel_load"
 116 #endif
 117
 118 /* Monitor Command Prompt */
 119 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 120 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 121
 122 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 123
 124 #include <asm/arch/soc.h>
 125
 126 #endif /* __LS1012A_COMMON_H */