include/configs/ls1012a_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor
   4  */
   5
   6 #ifndef __LS1012A_COMMON_H
   7 #define __LS1012A_COMMON_H
   8
   9 #include <asm/arch/config.h>
  10 #include <asm/arch/stream_id_lsch2.h>
  11 #include <linux/sizes.h>
  12
  13 #define CONFIG_SYS_CLK_FREQ             125000000
  14
  15 #ifdef CONFIG_TFABOOT
  16 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
  17 #else
  18 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  19 #endif
  20
  21 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  22 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  23 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  24 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
  25
  26 /* Generic Timer Definitions */
  27 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  28
  29 /* CSU */
  30 #define CONFIG_LAYERSCAPE_NS_ACCESS
  31
  32 /*SPI device */
  33 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
  34
  35 /* SATA */
  36 #define CONFIG_SCSI_AHCI_PLAT
  37
  38 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  39
  40 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  41 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  42 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  43                                                 CONFIG_SYS_SCSI_MAX_LUN)
  44
  45 /* I2C */
  46
  47 /* GPIO */
  48
  49 #define CONFIG_SYS_NS16550_SERIAL
  50 #define CONFIG_SYS_NS16550_REG_SIZE     1
  51 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  52
  53 #define CONFIG_HWCONFIG
  54 #define HWCONFIG_BUFFER_SIZE            128
  55
  56 #ifndef CONFIG_SPL_BUILD
  57 #define BOOT_TARGET_DEVICES(func) \
  58         func(MMC, mmc, 0) \
  59         func(USB, usb, 0) \
  60         func(SCSI, scsi, 0) \
  61         func(DHCP, dhcp, na)
  62 #include <config_distro_bootcmd.h>
  63 #endif
  64
  65 /* Initial environment variables */
  66 #define CONFIG_EXTRA_ENV_SETTINGS               \
  67         "verify=no\0"                           \
  68         "loadaddr=0x80100000\0"                 \
  69         "kernel_addr=0x100000\0"                \
  70         "initrd_high=0xffffffffffffffff\0"      \
  71         "kernel_start=0x1000000\0"              \
  72         "kernel_load=0xa0000000\0"              \
  73         "kernel_size=0x2800000\0"               \
  74         "bootm_size=0x10000000\0"               \
  75
  76 #ifdef CONFIG_TFABOOT
  77 #define QSPI_NOR_BOOTCOMMAND    "sf probe 0:0; sf read $kernel_load "\
  78                                 "$kernel_start $kernel_size && "\
  79                                 "bootm $kernel_load"
  80 #endif
  81
  82 /* Monitor Command Prompt */
  83 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
  84 #define CONFIG_SYS_MAXARGS              64      /* max command args */
  85
  86 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
  87
  88 #include <asm/arch/soc.h>
  89
  90 #endif /* __LS1012A_COMMON_H */