configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
[platform/kernel/u-boot.git] / include / configs / ls1012a_common.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2016 Freescale Semiconductor
4  */
5
6 #ifndef __LS1012A_COMMON_H
7 #define __LS1012A_COMMON_H
8
9 #define CONFIG_GICV2
10
11 #include <asm/arch/config.h>
12 #include <asm/arch/stream_id_lsch2.h>
13 #include <linux/sizes.h>
14
15 #define CONFIG_SYS_CLK_FREQ             125000000
16
17 #define CONFIG_SKIP_LOWLEVEL_INIT
18
19 #ifdef CONFIG_TFABOOT
20 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
21 #else
22 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
23 #endif
24 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
25
26 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
28 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
29 #define CONFIG_SYS_DDR_BLOCK2_BASE     0x880000000ULL
30
31 /* Generic Timer Definitions */
32 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
33
34 /* CSU */
35 #define CONFIG_LAYERSCAPE_NS_ACCESS
36
37 /* Size of malloc() pool */
38 #define CONFIG_SYS_MALLOC_LEN           (5 * SZ_1M)
39
40 /* PFE */
41 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
42 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x300000
43
44 /*SPI device */
45 #define CONFIG_SYS_FSL_QSPI_BASE        0x40000000
46
47 /* SATA */
48 #define CONFIG_SCSI_AHCI_PLAT
49
50 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
51
52 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
53 #define CONFIG_SYS_SCSI_MAX_LUN                 1
54 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
55                                                 CONFIG_SYS_SCSI_MAX_LUN)
56
57 /* I2C */
58 #ifndef CONFIG_DM_I2C
59 #define CONFIG_SYS_I2C
60 #else
61 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
62 #define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
63 #endif
64
65 #define CONFIG_SYS_NS16550_SERIAL
66 #define CONFIG_SYS_NS16550_REG_SIZE     1
67 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
68
69 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
70
71 #define CONFIG_SYS_HZ                   1000
72
73 #define CONFIG_HWCONFIG
74 #define HWCONFIG_BUFFER_SIZE            128
75
76 #ifndef CONFIG_SPL_BUILD
77 #define BOOT_TARGET_DEVICES(func) \
78         func(MMC, mmc, 0) \
79         func(USB, usb, 0) \
80         func(SCSI, scsi, 0) \
81         func(DHCP, dhcp, na)
82 #include <config_distro_bootcmd.h>
83 #endif
84
85 /* Initial environment variables */
86 #define CONFIG_EXTRA_ENV_SETTINGS               \
87         "verify=no\0"                           \
88         "loadaddr=0x80100000\0"                 \
89         "kernel_addr=0x100000\0"                \
90         "initrd_high=0xffffffffffffffff\0"      \
91         "kernel_start=0x1000000\0"              \
92         "kernel_load=0xa0000000\0"              \
93         "kernel_size=0x2800000\0"               \
94         "bootm_size=0x10000000\0"               \
95
96 #undef CONFIG_BOOTCOMMAND
97 #ifdef CONFIG_TFABOOT
98 #define QSPI_NOR_BOOTCOMMAND    "pfe stop; sf probe 0:0; sf read $kernel_load "\
99                                 "$kernel_start $kernel_size && "\
100                                 "bootm $kernel_load"
101 #else
102 #define CONFIG_BOOTCOMMAND      "pfe stop; sf probe 0:0; sf read $kernel_load "\
103                                 "$kernel_start $kernel_size && "\
104                                 "bootm $kernel_load"
105 #endif
106
107 /* Monitor Command Prompt */
108 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
109 #define CONFIG_SYS_MAXARGS              64      /* max command args */
110
111 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
112
113 #include <asm/arch/soc.h>
114
115 #endif /* __LS1012A_COMMON_H */