include/configs/ls1012a2g5rdb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017 NXP
   4  */
   5
   6 #ifndef __LS1012A2G5RDB_H__
   7 #define __LS1012A2G5RDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  15 #define CONFIG_CMD_MEMINFO
  16 #define CONFIG_SYS_MEMTEST_START        0x80000000
  17 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  18
  19 /*  MMC  */
  20 #ifdef CONFIG_MMC
  21 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  22 #endif
  23
  24 /* SATA */
  25 #define CONFIG_LIBATA
  26 #define CONFIG_SCSI_AHCI
  27 #define CONFIG_SCSI_AHCI_PLAT
  28
  29 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  30
  31 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  32 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  33 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  34                                                 CONFIG_SYS_SCSI_MAX_LUN)
  35 #define CONFIG_CMD_MEMINFO
  36 #define CONFIG_SYS_MEMTEST_START        0x80000000
  37 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  38
  39 #undef CONFIG_EXTRA_ENV_SETTINGS
  40 #define CONFIG_EXTRA_ENV_SETTINGS               \
  41         "verify=no\0"                           \
  42         "fdt_high=0xffffffffffffffff\0"         \
  43         "initrd_high=0xffffffffffffffff\0"      \
  44         "fdt_addr=0x00f00000\0"                 \
  45         "kernel_addr=0x01000000\0"              \
  46         "kernelheader_addr=0x800000\0"          \
  47         "scriptaddr=0x80000000\0"               \
  48         "scripthdraddr=0x80080000\0"            \
  49         "fdtheader_addr_r=0x80100000\0"         \
  50         "kernelheader_addr_r=0x80200000\0"      \
  51         "kernel_addr_r=0x81000000\0"            \
  52         "fdt_addr_r=0x90000000\0"               \
  53         "load_addr=0xa0000000\0"                \
  54         "kernel_size=0x2800000\0"               \
  55         "kernelheader_size=0x40000\0"           \
  56         "console=ttyS0,115200\0"                \
  57         BOOTENV                                 \
  58         "boot_scripts=ls1012ardb_boot.scr\0"    \
  59         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  60         "scan_dev_for_boot_part="               \
  61              "part list ${devtype} ${devnum} devplist; "        \
  62              "env exists devplist || setenv devplist 1; "       \
  63              "for distro_bootpart in ${devplist}; do "          \
  64                   "if fstype ${devtype} "                       \
  65                       "${devnum}:${distro_bootpart} "           \
  66                       "bootfstype; then "                       \
  67                       "run scan_dev_for_boot; " \
  68                   "fi; "                        \
  69               "done\0"                          \
  70         "scan_dev_for_boot="                              \
  71                 "echo Scanning ${devtype} "               \
  72                                 "${devnum}:${distro_bootpart}...; "  \
  73                 "for prefix in ${boot_prefixes}; do "     \
  74                         "run scan_dev_for_scripts; "      \
  75                 "done;"                                   \
  76                 "\0"                                      \
  77         "boot_a_script="                                  \
  78                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  79                         "${scriptaddr} ${prefix}${script}; "    \
  80                 "env exists secureboot && load ${devtype} "     \
  81                         "${devnum}:${distro_bootpart} "         \
  82                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
  83                         "&& esbc_validate ${scripthdraddr};"    \
  84                 "source ${scriptaddr}\0"          \
  85         "installer=load mmc 0:2 $load_addr "    \
  86                    "/flex_installer_arm64.itb; "        \
  87                    "bootm $load_addr#$board\0"  \
  88         "qspi_bootcmd=echo Trying load from qspi..;"    \
  89                 "sf probe && sf read $load_addr "       \
  90                 "$kernel_addr $kernel_size; env exists secureboot "     \
  91                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  92                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  93                 "bootm $load_addr#$board\0"
  94
  95 #undef CONFIG_BOOTCOMMAND
  96 #ifdef CONFIG_TFABOOT
  97 #undef QSPI_NOR_BOOTCOMMAND
  98 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
  99                              "env exists secureboot && esbc_halt;"
 100 #else
 101 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 102 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
 103                            "env exists secureboot && esbc_halt;"
 104 #endif
 105 #endif
 106
 107 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
 108 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
 109
 110 #include <asm/fsl_secure_boot.h>
 111
 112 #endif /* __LS1012A2G5RDB_H__ */