include/configs/ls1012a2g5rdb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017, 2021 NXP
   4  */
   5
   6 #ifndef __LS1012A2G5RDB_H__
   7 #define __LS1012A2G5RDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  15
  16 /* SATA */
  17 #define CONFIG_SCSI_AHCI_PLAT
  18
  19 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  20
  21 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  22 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  23 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  24                                                 CONFIG_SYS_SCSI_MAX_LUN)
  25
  26 #undef CONFIG_EXTRA_ENV_SETTINGS
  27 #define CONFIG_EXTRA_ENV_SETTINGS               \
  28         "verify=no\0"                           \
  29         "initrd_high=0xffffffffffffffff\0"      \
  30         "fdt_addr=0x00f00000\0"                 \
  31         "kernel_addr=0x01000000\0"              \
  32         "kernelheader_addr=0x800000\0"          \
  33         "scriptaddr=0x80000000\0"               \
  34         "scripthdraddr=0x80080000\0"            \
  35         "fdtheader_addr_r=0x80100000\0"         \
  36         "kernelheader_addr_r=0x80200000\0"      \
  37         "kernel_addr_r=0x81000000\0"            \
  38         "fdt_addr_r=0x90000000\0"               \
  39         "load_addr=0xa0000000\0"                \
  40         "kernel_size=0x2800000\0"               \
  41         "kernelheader_size=0x40000\0"           \
  42         "bootm_size=0x10000000\0"               \
  43         "console=ttyS0,115200\0"                \
  44         BOOTENV                                 \
  45         "boot_scripts=ls1012ardb_boot.scr\0"    \
  46         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  47         "scan_dev_for_boot_part="               \
  48              "part list ${devtype} ${devnum} devplist; "        \
  49              "env exists devplist || setenv devplist 1; "       \
  50              "for distro_bootpart in ${devplist}; do "          \
  51                   "if fstype ${devtype} "                       \
  52                       "${devnum}:${distro_bootpart} "           \
  53                       "bootfstype; then "                       \
  54                       "run scan_dev_for_boot; " \
  55                   "fi; "                        \
  56               "done\0"                          \
  57         "boot_a_script="                                  \
  58                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  59                         "${scriptaddr} ${prefix}${script}; "    \
  60                 "env exists secureboot && load ${devtype} "     \
  61                         "${devnum}:${distro_bootpart} "         \
  62                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
  63                         "&& esbc_validate ${scripthdraddr};"    \
  64                 "source ${scriptaddr}\0"          \
  65         "installer=load mmc 0:2 $load_addr "    \
  66                    "/flex_installer_arm64.itb; "        \
  67                    "bootm $load_addr#$board\0"  \
  68         "qspi_bootcmd=echo Trying load from qspi..;"    \
  69                 "sf probe && sf read $load_addr "       \
  70                 "$kernel_addr $kernel_size; env exists secureboot "     \
  71                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  72                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  73                 "bootm $load_addr#$board\0"
  74
  75 #ifdef CONFIG_TFABOOT
  76 #undef QSPI_NOR_BOOTCOMMAND
  77 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
  78                              "env exists secureboot && esbc_halt;"
  79 #endif
  80
  81 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
  82 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
  83
  84 #include <asm/fsl_secure_boot.h>
  85
  86 #endif /* __LS1012A2G5RDB_H__ */