include/configs/ls1012a2g5rdb.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017 NXP
   4  */
   5
   6 #ifndef __LS1012A2G5RDB_H__
   7 #define __LS1012A2G5RDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  15 #define CONFIG_CMD_MEMINFO
  16
  17 /*  MMC  */
  18 #ifdef CONFIG_MMC
  19 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  20 #endif
  21
  22 /* SATA */
  23 #define CONFIG_LIBATA
  24 #define CONFIG_SCSI_AHCI
  25 #define CONFIG_SCSI_AHCI_PLAT
  26
  27 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  28
  29 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  30 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  31 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  32                                                 CONFIG_SYS_SCSI_MAX_LUN)
  33 #define CONFIG_CMD_MEMINFO
  34
  35 #undef CONFIG_EXTRA_ENV_SETTINGS
  36 #define CONFIG_EXTRA_ENV_SETTINGS               \
  37         "verify=no\0"                           \
  38         "fdt_high=0xffffffffffffffff\0"         \
  39         "initrd_high=0xffffffffffffffff\0"      \
  40         "fdt_addr=0x00f00000\0"                 \
  41         "kernel_addr=0x01000000\0"              \
  42         "kernelheader_addr=0x800000\0"          \
  43         "scriptaddr=0x80000000\0"               \
  44         "scripthdraddr=0x80080000\0"            \
  45         "fdtheader_addr_r=0x80100000\0"         \
  46         "kernelheader_addr_r=0x80200000\0"      \
  47         "kernel_addr_r=0x81000000\0"            \
  48         "fdt_addr_r=0x90000000\0"               \
  49         "load_addr=0xa0000000\0"                \
  50         "kernel_size=0x2800000\0"               \
  51         "kernelheader_size=0x40000\0"           \
  52         "console=ttyS0,115200\0"                \
  53         BOOTENV                                 \
  54         "boot_scripts=ls1012ardb_boot.scr\0"    \
  55         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  56         "scan_dev_for_boot_part="               \
  57              "part list ${devtype} ${devnum} devplist; "        \
  58              "env exists devplist || setenv devplist 1; "       \
  59              "for distro_bootpart in ${devplist}; do "          \
  60                   "if fstype ${devtype} "                       \
  61                       "${devnum}:${distro_bootpart} "           \
  62                       "bootfstype; then "                       \
  63                       "run scan_dev_for_boot; " \
  64                   "fi; "                        \
  65               "done\0"                          \
  66         "scan_dev_for_boot="                              \
  67                 "echo Scanning ${devtype} "               \
  68                                 "${devnum}:${distro_bootpart}...; "  \
  69                 "for prefix in ${boot_prefixes}; do "     \
  70                         "run scan_dev_for_scripts; "      \
  71                 "done;"                                   \
  72                 "\0"                                      \
  73         "boot_a_script="                                  \
  74                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  75                         "${scriptaddr} ${prefix}${script}; "    \
  76                 "env exists secureboot && load ${devtype} "     \
  77                         "${devnum}:${distro_bootpart} "         \
  78                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
  79                         "&& esbc_validate ${scripthdraddr};"    \
  80                 "source ${scriptaddr}\0"          \
  81         "installer=load mmc 0:2 $load_addr "    \
  82                    "/flex_installer_arm64.itb; "        \
  83                    "bootm $load_addr#$board\0"  \
  84         "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
  85                 "sf probe && sf read $load_addr "       \
  86                 "$kernel_addr $kernel_size; env exists secureboot "     \
  87                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  88                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  89                 "bootm $load_addr#$board\0"
  90
  91 #undef CONFIG_BOOTCOMMAND
  92 #ifdef CONFIG_TFABOOT
  93 #undef QSPI_NOR_BOOTCOMMAND
  94 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
  95                              "env exists secureboot && esbc_halt;"
  96 #else
  97 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  98 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
  99                            "env exists secureboot && esbc_halt;"
 100 #endif
 101 #endif
 102
 103 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
 104 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
 105
 106 #include <asm/fsl_secure_boot.h>
 107
 108 #endif /* __LS1012A2G5RDB_H__ */