Patch by Steven Scholz, 4 Apr 2005:
[platform/kernel/u-boot.git] / include / configs / lpd7a404.h
1 /*
2  * See file CREDITS for list of people who contributed to this
3  * project.
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License as
7  * published by the Free Software Foundation; either version 2 of
8  * the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18  * MA 02111-1307 USA
19  */
20
21 #ifndef __LPD7A404_H_
22 #define __LPD7A404_H_
23
24 #define CONFIG_LPD7A404         /* Logic LH7A400 SDK */
25
26 #undef CONFIG_USE_IRQ
27
28 /*
29  * This board uses the logic LH7A404-10 card engine
30  */
31 #include <configs/lpd7a404-10.h>
32
33 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs      */
34 #define CONFIG_SETUP_MEMORY_TAGS        1
35 #define CONFIG_INITRD_TAG               1
36
37 /*
38  * Size of malloc() pool
39  */
40 #define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
41 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
42
43 /*
44  * select serial console configuration
45  */
46 #define CONFIG_CONSOLE_UART2    /* UART2 LH7A40x for console */
47
48 /* allow to overwrite serial and ethaddr */
49 #define CONFIG_ENV_OVERWRITE
50
51 #define CONFIG_BAUDRATE         115200
52 #define CONFIG_IPADDR           192.168.1.100
53 #define CONFIG_NETMASK          255.255.1.0
54 #define CONFIG_SERVERIP         192.168.1.1
55
56 #define CONFIG_TIMESTAMP        1       /* Print timestamp info for images */
57
58 #ifndef USE_920T_MMU
59 #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
60 #else
61 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
62 #endif
63
64
65 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
66 #include <cmd_confdefs.h>
67
68 #define CONFIG_BOOTDELAY        3
69
70 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
71 #define CONFIG_KGDB_BAUDRATE    115200          /* speed to run kgdb serial port */
72 /* what's this ? it's not used anywhere */
73 #define CONFIG_KGDB_SER_INDEX   1               /* which serial port to use */
74 #endif
75
76 /*
77  * Miscellaneous configurable options
78  */
79 #define CFG_LONGHELP                            /* undef to save memory         */
80 #define CFG_PROMPT              "LPD7A404> "    /* Monitor Command Prompt       */
81 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
82 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
83 #define CFG_MAXARGS             16              /* max number of command args   */
84 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
85
86 #define CFG_MEMTEST_START       0xc0300000      /* memtest works on     */
87 #define CFG_MEMTEST_END         0xc0500000      /* 2 MB in DRAM */
88
89 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
90
91 #define CFG_LOAD_ADDR           0xc0f00000      /* default load address */
92
93 /* valid baudrates */
94 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
95
96 /* size and location of u-boot in flash */
97 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
98 #define CFG_MONITOR_LEN         (256<<10)
99
100 #define CFG_ENV_IS_IN_FLASH     1
101
102 /* Address and size of Primary Environment Sector       */
103 #define CFG_ENV_ADDR            (CFG_FLASH_BASE + 0xFC0000)
104 #define CFG_ENV_SIZE            0x40000
105
106 #endif  /* __LPD7A404_H_ */