2 * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of
7 * the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * Valid values for CONFIG_SYS_TEXT_BASE are:
26 * Standard configuration - all models
27 * 0xFFF00000 boot from flash
29 * Test configuration (boot from RAM using uloader.o)
30 * LinkStation HD-HLAN and KuroBox Standard
31 * 0x03F00000 boot from RAM
32 * LinkStation HD-HGLAN and KuroBox HG
33 * 0x07F00000 boot from RAM
35 #ifndef CONFIG_SYS_TEXT_BASE
36 #define CONFIG_SYS_TEXT_BASE 0xFFF00000
43 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
45 /*-----------------------------------------------------------------------
46 * User configurable settings:
48 * CONFIG_IPADDR_LS - the IP address of the LinkStation
49 * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP
51 * CONFIG_NCIP_LS - the adress of the computer running net console
52 * if not configured, it will be set to
57 #define CONFIG_IPADDR_LS 192.168.11.150
58 #define CONFIG_SERVERIP_LS 192.168.11.149
60 #if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS)
61 #error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined
64 #if !defined(CONFIG_NCIP_LS)
65 #define CONFIG_NCIP_LS CONFIG_SERVERIP_LS
68 /*----------------------------------------------------------------------
69 * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING
70 *---------------------------------------------------------------------*/
72 #define CONFIG_MPC8245 1
73 #define CONFIG_LINKSTATION 1
75 /*---------------------------------------
78 * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN)
79 * LinkStation old model (CONFIG_LAN) - totally untested
80 * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN)
82 * Models not supported yet
83 * TeraStatin (CONFIG_HTGL)
86 #if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
87 #define CONFIG_IDENT_STRING " LinkStation / KuroBox"
88 #elif defined(CONFIG_HGLAN)
89 #define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG"
90 #elif defined(CONFIG_HTGL)
91 #define CONFIG_IDENT_STRING " TeraStation"
93 #error No LinkStation model defined
96 #define CONFIG_BOOTDELAY 5
97 #define CONFIG_ZERO_BOOTDELAY_CHECK
98 #undef CONFIG_BOOT_RETRY_TIME
100 #define CONFIG_AUTOBOOT_KEYED
101 #define CONFIG_AUTOBOOT_PROMPT \
102 "Boot in %02d seconds ('s' to stop)...", bootdelay
103 #define CONFIG_AUTOBOOT_STOP_STR "s"
105 #define CONFIG_CMD_IDE
106 #define CONFIG_CMD_PCI
107 #define CONFIG_CMD_DHCP
108 #define CONFIG_CMD_PING
109 #define CONFIG_CMD_EXT2
111 #define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
113 #define CONFIG_OF_LIBFDT 1
115 #define OF_STDOUT_PATH "/soc10x/serial@80004600"
117 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
118 #include <config_cmd_default.h>
121 * Miscellaneous configurable options
123 #define CONFIG_SYS_LONGHELP /* undef to save memory */
124 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
125 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
127 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
128 #define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
129 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
130 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */
132 #define CONFIG_BOOTCOMMAND "run bootcmd1"
133 #define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
134 #define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
136 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
138 #define XMK_STR(x) #x
139 #define MK_STR(x) XMK_STR(x)
141 #if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
142 #define UBFILE "share/u-boot/u-boot-hd.flash.bin"
143 #elif defined(CONFIG_HGLAN)
144 #define UBFILE "share/u-boot/u-boot-hg.flash.bin"
145 #elif defined(CONFIG_HTGL)
146 #define UBFILE "share/u-boot/u-boot-ht.flash.bin"
148 #error No LinkStation model defined
151 #define CONFIG_EXTRA_ENV_SETTINGS \
156 "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \
157 "netmask=255.255.255.0\0" \
158 "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \
159 "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \
161 "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \
162 "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \
165 "hdfile=boot/uImage\0" \
166 "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \
167 "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \
168 "hdboot=run hdload;run boothd\0" \
169 "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \
170 "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \
171 "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
172 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
174 "bootcmd1=run hdboot;run flboot\0" \
175 "bootcmd2=run flboot\0" \
176 "bootcmd3=run emboot\0" \
177 "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \
178 "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \
180 "ubfile="UBFILE"\0" \
181 "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \
182 "ubsaddr=fff00000\0" \
183 "ubeaddr=fff2ffff\0" \
184 "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \
185 "upgrade=run ubload ubflash\0"
187 /*-----------------------------------------------------------------------
191 /* Verified: CONFIG_PCI_PNP doesn't work */
192 #undef CONFIG_PCI_PNP
193 #define CONFIG_PCI_SCAN_SHOW
195 #ifndef CONFIG_PCI_PNP
196 /* Keep the following defines in sync with the BAT mappings */
198 #define PCI_ETH_IOADDR 0xbfff00
199 #define PCI_ETH_MEMADDR 0xbffffc00
200 #define PCI_IDE_IOADDR 0xbffed0
201 #define PCI_IDE_MEMADDR 0xbffffb00
202 #define PCI_USB0_IOADDR 0
203 #define PCI_USB0_MEMADDR 0xbfffe000
204 #define PCI_USB1_IOADDR 0
205 #define PCI_USB1_MEMADDR 0xbfffd000
206 #define PCI_USB2_IOADDR 0
207 #define PCI_USB2_MEMADDR 0xbfffcf00
211 /*-----------------------------------------------------------------------
214 #define CONFIG_NET_MULTI
216 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
218 #define CONFIG_TULIP_USE_IO
219 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
220 #define CONFIG_RTL8169
223 #define CONFIG_NET_RETRY_COUNT 5
225 #define CONFIG_NETCONSOLE
227 /*-----------------------------------------------------------------------
228 * Start addresses for the final memory configuration
229 * (Set up by the startup code)
230 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
232 #define CONFIG_SYS_SDRAM_BASE 0x00000000
234 #define CONFIG_SYS_FLASH_BASE 0xFFC00000
235 #define CONFIG_SYS_FLASH_SIZE 0x00400000
236 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
238 #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
239 #define CONFIG_SYS_EUMB_ADDR 0x80000000
240 #define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000
241 #define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000
243 #define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */
244 #define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
246 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
247 #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
249 /* Maximum amount of RAM */
250 #if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
251 #define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
252 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
253 #define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
255 #error Unknown LinkStation type
258 /*-----------------------------------------------------------------------
259 * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
261 * RAM based builds are for testing purposes. A Linux module, uloader.o,
262 * exists to load U-Boot and pass control to it
264 * Always do "make clean" after changing the build type
266 #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
267 #define CONFIG_SYS_RAMBOOT
270 /*-----------------------------------------------------------------------
271 * Definitions for initial stack pointer and data area
273 #if 1 /* RAM is available when the first C function is called */
274 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
276 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
278 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
279 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
281 /*----------------------------------------------------------------------
282 * Serial configuration
284 #define CONFIG_CONS_INDEX 1
285 #define CONFIG_BAUDRATE 57600
286 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
288 #define CONFIG_SYS_NS16550
289 #define CONFIG_SYS_NS16550_SERIAL
291 #define CONFIG_SYS_NS16550_REG_SIZE 1
293 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
295 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */
296 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */
299 * Low Level Configuration Settings
300 * (address mappings, register initial values, etc.)
301 * You should know what you are doing if you make changes here.
302 * For the detail description refer to the MPC8245 user's manual.
304 * Unless indicated otherwise, the values are
305 * taken from the orignal Linkstation boot code
307 * Most of the low level configuration setttings are normally used
308 * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
309 * Low level initialisation is done in board/linkstation/early_init.S
310 * The values below are included for reference purpose only
313 /* FIXME: 32.768 MHz is the crystal frequency but */
314 /* the real frequency is lower by about 0.75% */
315 #define CONFIG_SYS_CLK_FREQ 32768000
316 #define CONFIG_SYS_HZ 1000
318 /* Bit-field values for MCCR1. */
319 #define CONFIG_SYS_ROMNAL 0
320 #define CONFIG_SYS_ROMFAL 11
322 #define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */
323 #define CONFIG_SYS_BANK1_ROW 0
324 #define CONFIG_SYS_BANK2_ROW 0
325 #define CONFIG_SYS_BANK3_ROW 0
326 #define CONFIG_SYS_BANK4_ROW 0
327 #define CONFIG_SYS_BANK5_ROW 0
328 #define CONFIG_SYS_BANK6_ROW 0
329 #define CONFIG_SYS_BANK7_ROW 0
331 /* Bit-field values for MCCR2. */
332 #define CONFIG_SYS_TSWAIT 0
333 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
334 #define CONFIG_SYS_REFINT 0x15e0
335 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
336 #define CONFIG_SYS_REFINT 0x1580
339 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
340 #define CONFIG_SYS_BSTOPRE 0x91c
342 /* Bit-field values for MCCR3. */
343 #define CONFIG_SYS_REFREC 7
345 /* Bit-field values for MCCR4. */
346 #define CONFIG_SYS_PRETOACT 2
347 #define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */
348 #define CONFIG_SYS_ACTORW 2
349 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
350 #define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */
351 /*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/
352 #elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
353 #define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */
354 /*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/
356 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
357 #define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */
358 #define CONFIG_SYS_REGDIMM 0
359 #define CONFIG_SYS_DBUS_SIZE2 1
360 #define CONFIG_SYS_SDMODE_WRAP 0
362 #define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */
363 #define CONFIG_SYS_SDRAM_DSCD 0x30
365 /* Memory bank settings.
366 * Only bits 20-29 are actually used from these vales to set the
367 * start/end addresses. The upper two bits will always be 0, and the lower
368 * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
369 * address. Refer to the MPC8240 book.
372 #define CONFIG_SYS_BANK0_START 0x00000000
373 #define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
374 #define CONFIG_SYS_BANK0_ENABLE 1
375 #define CONFIG_SYS_BANK1_START 0x3ff00000
376 #define CONFIG_SYS_BANK1_END 0x3fffffff
377 #define CONFIG_SYS_BANK1_ENABLE 0
378 #define CONFIG_SYS_BANK2_START 0x3ff00000
379 #define CONFIG_SYS_BANK2_END 0x3fffffff
380 #define CONFIG_SYS_BANK2_ENABLE 0
381 #define CONFIG_SYS_BANK3_START 0x3ff00000
382 #define CONFIG_SYS_BANK3_END 0x3fffffff
383 #define CONFIG_SYS_BANK3_ENABLE 0
384 #define CONFIG_SYS_BANK4_START 0x3ff00000
385 #define CONFIG_SYS_BANK4_END 0x3fffffff
386 #define CONFIG_SYS_BANK4_ENABLE 0
387 #define CONFIG_SYS_BANK5_START 0x3ff00000
388 #define CONFIG_SYS_BANK5_END 0x3fffffff
389 #define CONFIG_SYS_BANK5_ENABLE 0
390 #define CONFIG_SYS_BANK6_START 0x3ff00000
391 #define CONFIG_SYS_BANK6_END 0x3fffffff
392 #define CONFIG_SYS_BANK6_ENABLE 0
393 #define CONFIG_SYS_BANK7_START 0x3ff00000
394 #define CONFIG_SYS_BANK7_END 0x3fffffff
395 #define CONFIG_SYS_BANK7_ENABLE 0
397 #define CONFIG_SYS_ODCR 0x15
399 /*----------------------------------------------------------------------
400 * Initial BAT mappings
404 * 1) GUARDED and WRITETHROUGH not allowed in IBATS
405 * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
409 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
410 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
412 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
413 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
415 /* EUMB: 1MB of address space */
416 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
417 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
419 #define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
420 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
422 /* PCI Mem: 256MB of address space */
423 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
424 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
426 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
427 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
429 /* PCI and local ROM/Flash: last 32MB of address space */
430 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
431 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
433 #define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
434 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
437 * For booting Linux, the board info and command line data
438 * have to be in the first 8 MB of memory, since this is
439 * the maximum mapped by the Linux kernel during initialization.
441 * FIXME: This doesn't appear to be true for the newer kernels
442 * which map more that 8 MB
444 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
446 /*-----------------------------------------------------------------------
449 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
450 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
452 #undef CONFIG_SYS_FLASH_PROTECTION
453 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
454 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
455 #define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */
457 #define CONFIG_SYS_FLASH_ERASE_TOUT 12000
458 #define CONFIG_SYS_FLASH_WRITE_TOUT 1000
460 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
462 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
463 #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
465 #define CONFIG_ENV_IS_IN_FLASH
467 * The original LinkStation flash organisation uses
468 * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
469 * We use the last sector of this area to store the environment
470 * which leaves max. 384 kB for the U-Boot itself
472 #define CONFIG_ENV_ADDR 0xFFF60000
473 #define CONFIG_ENV_SIZE 0x00010000
474 #define CONFIG_ENV_SECT_SIZE 0x00010000
476 /*-----------------------------------------------------------------------
477 * Cache Configuration
479 #define CONFIG_SYS_CACHELINE_SIZE 32
480 #ifdef CONFIG_CMD_KGDB
481 #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
484 /*-----------------------------------------------------------------------
485 * IDE/ATA definitions
487 #undef CONFIG_IDE_LED /* No IDE LED */
488 #define CONFIG_IDE_RESET /* no reset for ide supported */
489 #define CONFIG_IDE_PREINIT /* check for units */
490 #define CONFIG_LBA48 /* 48 bit LBA supported */
492 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
493 #define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */
494 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */
495 #elif defined(CONFIG_HGTL)
496 #define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */
497 #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
499 #error Config IDE: Unknown LinkStation type
502 #define CONFIG_SYS_ATA_BASE_ADDR 0
504 #define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */
505 #define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */
506 #define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */
508 /*-----------------------------------------------------------------------
509 * Partitions and file system
511 #define CONFIG_DOS_PARTITION
513 #endif /* __CONFIG_H */