2 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_LACIE_KW_H
8 #define _CONFIG_LACIE_KW_H
11 * Machine number definition
13 #if defined(CONFIG_INETSPACE_V2)
14 #define CONFIG_MACH_TYPE MACH_TYPE_INETSPACE_V2
15 #define CONFIG_IDENT_STRING " IS v2"
16 #elif defined(CONFIG_NETSPACE_V2)
17 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
18 #define CONFIG_IDENT_STRING " NS v2"
19 #elif defined(CONFIG_NETSPACE_LITE_V2)
20 #define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */
21 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
22 #define CONFIG_IDENT_STRING " NS v2 Lite"
23 #elif defined(CONFIG_NETSPACE_MINI_V2)
24 #define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */
25 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
26 #define CONFIG_IDENT_STRING " NS v2 Mini"
27 #elif defined(CONFIG_NETSPACE_MAX_V2)
28 #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
29 #define CONFIG_IDENT_STRING " NS Max v2"
30 #elif defined(CONFIG_D2NET_V2)
31 #define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
32 #define CONFIG_IDENT_STRING " D2 v2"
33 #elif defined(CONFIG_NET2BIG_V2)
34 #define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
35 #define CONFIG_IDENT_STRING " 2Big v2"
37 #error "Unknown board"
41 * High Level Configuration Options (easy to change)
43 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
45 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
46 #define CONFIG_KW88F6192
48 #define CONFIG_KW88F6281
50 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
53 * Commands configuration
55 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
56 #define CONFIG_CMD_ENV
57 #define CONFIG_CMD_DHCP
58 #define CONFIG_CMD_PING
60 #define CONFIG_CMD_I2C
61 #define CONFIG_CMD_IDE
62 #ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
63 #define CONFIG_CMD_USB
67 * Core clock definition
69 #define CONFIG_SYS_TCLK 166000000 /* 166MHz */
74 #define CONFIG_NR_DRAM_BANKS 1
77 * Different SDRAM configuration and size for some of the boards derived
78 * from the Network Space v2
80 #if defined(CONFIG_INETSPACE_V2)
81 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
82 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
83 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
87 * mv-common.h should be defined after CMD configs since it used them
88 * to enable certain macros
90 #include "mv-common.h"
92 /* Remove or override few declarations from mv-common.h */
94 #undef CONFIG_ENV_SPI_MAX_HZ
95 #undef CONFIG_SYS_IDE_MAXBUS
96 #undef CONFIG_SYS_IDE_MAXDEVICE
97 #undef CONFIG_SYS_PROMPT
98 #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
99 #define CONFIG_SYS_IDE_MAXBUS 1
100 #define CONFIG_SYS_IDE_MAXDEVICE 1
101 #if defined(CONFIG_D2NET_V2)
102 #define CONFIG_SYS_PROMPT "d2v2> "
103 #elif defined(CONFIG_NET2BIG_V2)
104 #define CONFIG_SYS_PROMPT "2big2> "
106 #define CONFIG_SYS_PROMPT "ns2> "
110 * Enable platform initialisation via misc_init_r() function
112 #define CONFIG_MISC_INIT_R
115 * Ethernet Driver configuration
117 #ifdef CONFIG_CMD_NET
118 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
119 #define CONFIG_NETCONSOLE
123 * SATA Driver configuration
125 #ifdef CONFIG_MVSATA_IDE
126 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
127 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
128 defined(CONFIG_NET2BIG_V2)
129 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
131 #endif /* CONFIG_MVSATA_IDE */
134 * Enable GPI0 support
136 #define CONFIG_KIRKWOOD_GPIO
141 #ifdef CONFIG_CMD_I2C
142 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
143 #define CONFIG_CMD_EEPROM
144 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
145 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
147 #if defined(CONFIG_NET2BIG_V2)
148 #define CONFIG_SYS_I2C_G762_ADDR 0x3e
150 #endif /* CONFIG_CMD_I2C */
155 #define CONFIG_DOS_PARTITION
156 #define CONFIG_EFI_PARTITION
159 * File systems support
161 #define CONFIG_CMD_EXT2
162 #define CONFIG_CMD_FAT
165 * Use the HUSH parser
167 #define CONFIG_SYS_HUSH_PARSER
170 * Console configuration
172 #define CONFIG_CONSOLE_MUX
173 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
176 * Enable device tree support
178 #define CONFIG_OF_LIBFDT
181 * Environment variables configurations
183 #define CONFIG_ENV_IS_IN_SPI_FLASH
184 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
185 #define CONFIG_ENV_SIZE 0x1000 /* 4KB */
186 #define CONFIG_ENV_ADDR 0x70000
187 #define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
190 * Default environment variables
192 #define CONFIG_BOOTARGS "console=ttyS0,115200"
194 #define CONFIG_BOOTCOMMAND \
195 "dhcp && run netconsole; " \
196 "if run usbload || run diskload; then bootm; fi"
198 #define CONFIG_EXTRA_ENV_SETTINGS \
202 "bootfile=uImage\0" \
203 "loadaddr=0x800000\0" \
206 "set stdin $stdin,nc; " \
207 "set stdout $stdout,nc; " \
208 "set stderr $stderr,nc;\0" \
209 "diskload=ide reset && " \
210 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
211 "usbload=usb start && " \
212 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
214 #endif /* _CONFIG_LACIE_KW_H */